84 lines
3.7 KiB
ReStructuredText
84 lines
3.7 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
||
|
||
==============================================
|
||
SSSRAID - 3SNIC SCSI RAID Controller driver
|
||
==============================================
|
||
|
||
This file describes the SSSRAID SCSI driver for 3SNIC
|
||
(http://www.3snic.com) RAID controllers. The SSSRAID
|
||
driver is the first generation RAID driver for 3SNIC Corp.
|
||
|
||
For 3SNIC SSSRAID controller support, enable the SSSRAID driver
|
||
when configuring the kernel.
|
||
|
||
SSSRAID specific entries in /sys
|
||
=================================
|
||
|
||
SSSRAID host attributes
|
||
------------------------
|
||
- /sys/class/scsi_host/host*/csts_pp
|
||
- /sys/class/scsi_host/host*/csts_shst
|
||
- /sys/class/scsi_host/host*/csts_cfs
|
||
- /sys/class/scsi_host/host*/csts_rdy
|
||
- /sys/class/scsi_host/host*/fw_version
|
||
|
||
The host csts_pp attribute is a read only attribute. This attribute
|
||
indicates whether the controller is processing commands. If this attribute
|
||
is set to ‘1’, then the controller is processing commands normally. If
|
||
this attribute is cleared to ‘0’, then the controller has temporarily stopped
|
||
processing commands in order to handle an event (e.g., firmware activation).
|
||
|
||
The host csts_shst attribute is a read only attribute. This attribute
|
||
indicates status of shutdown processing.The shutdown status values are defined
|
||
as:
|
||
====== ==============================
|
||
Value Definition
|
||
====== ==============================
|
||
00b Normal operation
|
||
01b Shutdown processing occurring
|
||
10b Shutdown processing complete
|
||
11b Reserved
|
||
====== ==============================
|
||
The host csts_cfs attribute is a read only attribute. This attribute is set to
|
||
’1’ when a fatal controller error occurred that could not be communicated in the
|
||
appropriate Completion Queue. This bit is cleared to ‘0’ when a fatal controller
|
||
error has not occurred.
|
||
|
||
The host csts_rdy attribute is a read only attribute. This attribute is set to
|
||
‘1’ when the controller is ready to process submission queue entries.
|
||
|
||
The fw_version attribute is read-only and will return the driver version and the
|
||
controller firmware version.
|
||
|
||
SSSRAID scsi device attributes
|
||
------------------------------
|
||
- /sys/class/scsi_device/X\:X\:X\:X/device/raid_level
|
||
- /sys/class/scsi_device/X\:X\:X\:X/device/raid_state
|
||
- /sys/class/scsi_device/X\:X\:X\:X/device/raid_resync
|
||
|
||
The device raid_level attribute is a read only attribute. This attribute indicates
|
||
RAID level of scsi device(will dispaly "NA" if scsi device is not virtual disk type).
|
||
|
||
The device raid_state attribute is read-only and indicates RAID status of scsi
|
||
device(will dispaly "NA" if scsi device is not virtual disk type).
|
||
|
||
The device raid_resync attribute is read-only and indicates RAID rebuild processing
|
||
of scsi device(will dispaly "NA" if scsi device is not virtual disk type).
|
||
|
||
Supported devices
|
||
=================
|
||
|
||
=================== ======= =======================================
|
||
PCI ID (pci.ids) OEM Product
|
||
=================== ======= =======================================
|
||
1F3F:2100 3SNIC 3S510(HBA:8Ports,1G DDR)
|
||
1F3F:2100 3SNIC 3S520(HBA:16Ports,1G DDR)
|
||
1F3F:2100 3SNIC 3S530(HBA:32Ports,1G DDR)
|
||
1F3F:2100 3SNIC 3S540(HBA:40Ports,1G DDR)
|
||
1F3F:2200 3SNIC 3S580(RAID:16Ports,2G cache)
|
||
1F3F:2200 3SNIC 3S585(RAID:16Ports,4G cache)
|
||
1F3F:2200 3SNIC 3S590(RAID:32Ports,4G cache)
|
||
1F3F:2200 3SNIC 3S5A0(RAID:40Ports,2G cache)
|
||
1F3F:2200 3SNIC 3S5A5(RAID:40Ports,4G cache)
|
||
=================== ======= =======================================
|