1124 lines
28 KiB
Plaintext
1124 lines
28 KiB
Plaintext
|
|
/dts-v1/;
|
|
|
|
#include "rk3588-evb7-lp4.dtsi"
|
|
#include "rk3588-linux.dtsi"
|
|
|
|
/ {
|
|
model = "TL3588-EVM";
|
|
|
|
vcc5v0_typec: vcc5v0-typec {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_typec";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_typec_enable>;
|
|
};
|
|
|
|
clk16m: clk16m {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <16000000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&user_key_pin>;
|
|
|
|
user_key1 {
|
|
label = "user-key1";
|
|
linux,code = <KEY_PROG2>;
|
|
gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <0>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
/delete-node/ adc-keys;
|
|
adc-keys1 {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 0>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
user_key2 {
|
|
label = "user-key2";
|
|
linux,code = <KEY_PROG3>;
|
|
press-threshold-microvolt = <1750>;
|
|
};
|
|
};
|
|
|
|
adc-keys2 {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 1>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
user_key0 {
|
|
label = "user-key0";
|
|
linux,code = <KEY_PROG1>;
|
|
press-threshold-microvolt = <1750>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
&leds {
|
|
user_led0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&user_led0_pin>;
|
|
label = "user-led0";
|
|
gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
default-state = "off";
|
|
};
|
|
|
|
user_led1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&user_led1_pin>;
|
|
label = "user-led1";
|
|
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
default-state = "off";
|
|
};
|
|
|
|
som_led0 {
|
|
label = "heartbeat";
|
|
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "off";
|
|
};
|
|
|
|
som_led1 {
|
|
label = "disk";
|
|
gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "mmc0";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
ds1307@68 {
|
|
compatible = "dallas,ds1307";
|
|
reg = <0x68>;
|
|
};
|
|
|
|
lt8912b@48 {
|
|
compatible = "lontium,lt8912b";
|
|
reg = <0x48>;
|
|
status = "okay";
|
|
reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&sdio {
|
|
status = "disabled";
|
|
};
|
|
|
|
&gmac0 {
|
|
phy-mode = "rgmii-rxid";
|
|
clock_in_out = "output";
|
|
phy-handle = <&rgmii_phy0>;
|
|
|
|
snps,reset-gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
|
|
snps,reset-delays-us = <20000 20000 100000>;
|
|
snps,reset-active-low;
|
|
tx_delay = <0x36>;
|
|
rx_delay = <0x12>;
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac0_miim
|
|
&gmac0_tx_bus2
|
|
&gmac0_rx_bus2
|
|
&gmac0_rgmii_clk
|
|
&gmac0_rgmii_bus
|
|
&gmac0_phy_reset>;
|
|
|
|
};
|
|
|
|
&gmac1 {
|
|
phy-mode = "rgmii-rxid";
|
|
clock_in_out = "output";
|
|
phy-handle = <&rgmii_phy1>;
|
|
|
|
snps,reset-gpio = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
|
|
snps,reset-delays-us = <20000 20000 100000>;
|
|
snps,reset-active-low;
|
|
tx_delay = <0x36>;
|
|
rx_delay = <0x12>;
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac1_miim
|
|
&gmac1_tx_bus2
|
|
&gmac1_rx_bus2
|
|
&gmac1_rgmii_clk
|
|
&gmac1_rgmii_bus
|
|
&gmac1_phy_reset>;
|
|
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy0: phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x0>;
|
|
eee-broken-1000t;
|
|
status = "okay";
|
|
/* phy delay for YT8521H */
|
|
phy-tx-delay = <0x01>; /* tx delay: 0~0xf, 150ps each step */
|
|
phy-rx-delay = <0x00>; /* rx delay: 0~0xf, 150ps each step */
|
|
};
|
|
};
|
|
|
|
&mdio1 {
|
|
rgmii_phy1: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
eee-broken-1000t;
|
|
/* phy delay for YT8521H */
|
|
phy-tx-delay = <0x01>; /* tx delay: 0~0xf, 150ps each step */
|
|
phy-rx-delay = <0x00>; /* rx delay: 0~0xf, 150ps each step */
|
|
status = "okay";
|
|
};
|
|
switch0: switch@0 {
|
|
compatible = "motorcomm,yt9215s";
|
|
reg = <0x2>;
|
|
address = <0x1D>;
|
|
rx-delay = <0x01>; //yt9521中的tx、rx delay。
|
|
tx-delay = <0x01>;
|
|
};
|
|
};
|
|
|
|
&vcc5v0_host {
|
|
/delete-property/ gpio;
|
|
/delete-property/ pinctrl-0;
|
|
/delete-property/ pinctrl-names;
|
|
};
|
|
|
|
&uart7 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-0 = <&uart0m2_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart5 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart5m1_xfer>;
|
|
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-0 = <&uart3m2_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart8 {
|
|
pinctrl-0 = <&uart8m0_xfer &uart8_re &uart8_de>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart9 {
|
|
pinctrl-0 = <&uart9m2_xfer &uart9_re &uart9_de>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm0 {
|
|
pinctrl-0 = <&pwm0m1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fan {
|
|
pwms = <&pwm0 0 50000 0>;
|
|
};
|
|
|
|
&vcc_mipicsi0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&es8388_sound {
|
|
/delete-property/ spk-con-gpio;
|
|
hp-con-gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
|
|
rockchip,audio-routing =
|
|
"Headphone", "LOUT1",
|
|
"Headphone", "ROUT1",
|
|
"Headphone", "Headphone Power",
|
|
"Headphone", "Headphone Power",
|
|
"LINPUT1", "Main Mic",
|
|
"LINPUT2", "Main Mic",
|
|
"RINPUT1", "Headset Mic",
|
|
"RINPUT2", "Headset Mic";
|
|
};
|
|
|
|
&i2s0_8ch {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2s0_lrck
|
|
&i2s0_sclk
|
|
&i2s0_sdi0
|
|
&i2s0_sdo0>;
|
|
};
|
|
|
|
&i2c7 {
|
|
status = "disabled";
|
|
/delete-node/ es8388@11;
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
gt911@5d {
|
|
compatible = "goodix,gt911";
|
|
reg = <0x5d>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <4 0>;
|
|
irq-gpios = <&gpio1 RK_PA4 0>;
|
|
reset-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <>911_int >911_reset>;
|
|
status = "disabled";
|
|
};
|
|
|
|
es8388: es8388@11 {
|
|
status = "disabled";
|
|
#sound-dai-cells = <0>;
|
|
compatible = "everest,es8388", "everest,es8323";
|
|
reg = <0x11>;
|
|
clocks = <&mclkout_i2s0>;
|
|
clock-names = "mclk";
|
|
assigned-clocks = <&mclkout_i2s0>;
|
|
assigned-clock-rates = <12288000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s0_mclk>;
|
|
};
|
|
|
|
typec: husb311@4e {
|
|
compatible = "hynetek,husb311";
|
|
reg = <0x4e>;
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&typec_int>;
|
|
vbus-supply = <&vcc5v0_typec>;
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
typec_role_sw: endpoint@0 {
|
|
remote-endpoint = <&dwc3_0_role_switch>;
|
|
};
|
|
};
|
|
};
|
|
|
|
usb_con: connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
op-sink-microwatt = <1000000>;
|
|
sink-pdos =
|
|
<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
|
source-pdos =
|
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
|
|
altmodes {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
altmode@0 {
|
|
reg = <0>;
|
|
svid = <0xff01>;
|
|
vdo = <0xffffffff>;
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
typec_orien_sw: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dp_altmode_mux: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&vcc_3v3_sd_s0 {
|
|
/delete-property/ gpio;
|
|
/delete-property/ pinctrl-names;
|
|
/delete-property/ pinctrl-0;
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hp_det {
|
|
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-0 = <&spi0m2_cs0 &spi0m2_cs1 &spi0m2_cs1 &spi0m2_pins>;
|
|
status = "okay";
|
|
|
|
xl2515@0 {
|
|
compatible = "microchip,mcp2515";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&xl2515_int0>;
|
|
reg = <0>;
|
|
clocks = <&clk16m>;
|
|
spi-max-frequency = <1000000>;
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <RK_PB5 IRQ_TYPE_LEVEL_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
xl2515@1 {
|
|
compatible = "microchip,mcp2515";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&xl2515_int1>;
|
|
reg = <1>;
|
|
clocks = <&clk16m>;
|
|
spi-max-frequency = <1000000>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&vcc_mipidcphy0 {
|
|
/delete-property/ gpio;
|
|
/delete-property/ pinctrl-0;
|
|
/delete-property/ pinctrl-names;
|
|
};
|
|
|
|
&combphy0_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy1_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2_psu {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie2x1l0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&pcie2x1l1 {
|
|
phys = <&combphy2_psu PHY_TYPE_PCIE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&pcie2x1l2 {
|
|
phys = <&combphy0_ps PHY_TYPE_PCIE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&sata0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&sata1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sata2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&pcie30phy {
|
|
rockchip,pcie30-phymode = <PHY_MODE_PCIE_AGGREGATION>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&pcie3x4 {
|
|
/delete-property/ pinctrl-names;
|
|
/delete-property/ pinctrl-0;
|
|
status = "disabled";
|
|
};
|
|
|
|
&usbdp_phy1 {
|
|
rockchip,dp-lane-mux = <0x02 0x03>;
|
|
};
|
|
|
|
&usbdp_phy1_u3 {
|
|
maximum-speed = "super-speed";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
maximum-speed = "super-speed";
|
|
};
|
|
|
|
&vcc3v3_pcie30 {
|
|
/delete-property/ enable-active-high;
|
|
/delete-property/ gpios;
|
|
/delete-property/ startup-delay-us;
|
|
};
|
|
|
|
&hdptxphy_hdmi1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi1_in_vp0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi1_in_vp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi1_in_vp2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi1_sound {
|
|
status = "disabled";
|
|
};
|
|
|
|
&route_hdmi1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdptxphy_hdmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0_in_vp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0_in_vp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi0_in_vp2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi0_sound {
|
|
status = "disabled";
|
|
};
|
|
|
|
&route_hdmi0 {
|
|
status = "okay";
|
|
connect = <&vp0_out_hdmi0>;
|
|
};
|
|
|
|
&hdmirx_ctrler {
|
|
/* Effective level used to trigger HPD: 0-low, 1-high */
|
|
status = "disabled";
|
|
hpd-trigger-level = <1>;
|
|
hdmirx-det-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&hdmim2_rx_scl
|
|
&hdmim2_rx_sda
|
|
&hdmim2_rx_hpdin
|
|
&hdmirx_det>;
|
|
};
|
|
|
|
&hdmirx_det {
|
|
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
&fiq_debugger {
|
|
rockchip,baudrate = <115200>;
|
|
};
|
|
|
|
&threshold {
|
|
temperature = <125000>;
|
|
};
|
|
|
|
&target {
|
|
temperature = <125000>;
|
|
};
|
|
|
|
&soc_crit {
|
|
temperature = <125000>;
|
|
};
|
|
|
|
&cluster0_opp_table {
|
|
/* RK3588 A55 core limit at 1.4GHz */
|
|
/delete-node/ opp-1800000000;
|
|
|
|
};
|
|
|
|
&cluster1_opp_table {
|
|
/* RK3588 A76 core limit at 1.6GHz */
|
|
/delete-node/ opp-2208000000;
|
|
/delete-node/ opp-2256000000;
|
|
/delete-node/ opp-2304000000;
|
|
/delete-node/ opp-2352000000;
|
|
/delete-node/ opp-2400000000;
|
|
|
|
};
|
|
|
|
&cluster2_opp_table {
|
|
/* RK3588 A76 core limit at 1.6GHz */
|
|
/delete-node/ opp-1800000000;
|
|
/delete-node/ opp-2016000000;
|
|
/delete-node/ opp-2208000000;
|
|
/delete-node/ opp-2256000000;
|
|
/delete-node/ opp-2304000000;
|
|
/delete-node/ opp-2352000000;
|
|
/delete-node/ opp-2400000000;
|
|
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
rockchip,typec-vbus-det;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0_dp {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0_u3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0 {
|
|
status = "okay";
|
|
orientation-switch;
|
|
svid = <0xff01>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&typec_sbu1 &typec_sbu2>;
|
|
sbu1-dc-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
sbu2-dc-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
usbdp_phy0_orientation_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&typec_orien_sw>;
|
|
};
|
|
|
|
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
status = "okay";
|
|
dr_mode = "otg";
|
|
usb-role-switch;
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dwc3_0_role_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&typec_role_sw>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&route_dp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dp1_in_vp0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dp1_in_vp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dp1_in_vp2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dp0 {
|
|
/delete-property/ hpd-gpios;
|
|
/delete-property/ pinctrl-0;
|
|
/delete-property/ pinctrl-names;
|
|
status = "disabled";
|
|
};
|
|
|
|
&route_dp0 {
|
|
status = "disabled";
|
|
connect = <&vp0_out_dp0>;
|
|
};
|
|
|
|
&dp0_in_vp0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dp0_in_vp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dp0_in_vp2 {
|
|
status = "disabled";
|
|
};
|
|
&dsi0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi0_panel {
|
|
/delete-property/ power-supply;
|
|
|
|
reset-delay-ms = <200>;
|
|
enable-delay-ms = <200>;
|
|
prepare-delay-ms = <200>;
|
|
unprepare-delay-ms = <200>;
|
|
disable-delay-ms = <200>;
|
|
reset-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dsi0_panel_reset>;
|
|
status = "disabled";
|
|
|
|
panel-init-sequence = [
|
|
05 1E 01 01
|
|
23 00 02 EE 50
|
|
29 00 03 EA 85 55
|
|
23 00 02 30 00
|
|
23 00 02 31 00
|
|
29 00 03 90 50 15
|
|
23 00 02 24 20
|
|
23 00 02 99 00
|
|
23 00 02 79 00
|
|
23 00 02 95 74
|
|
23 00 02 7A 20
|
|
23 00 02 97 09
|
|
23 00 02 7D 08
|
|
23 00 02 56 83
|
|
23 00 02 EE 60
|
|
23 00 02 30 01
|
|
23 00 02 27 22
|
|
23 00 02 31 0F
|
|
23 00 02 32 D9
|
|
23 00 02 33 C0
|
|
23 00 02 34 1F
|
|
23 00 02 35 22
|
|
23 00 02 36 00
|
|
23 00 02 37 00
|
|
23 00 02 3A 24
|
|
23 00 02 3B 00
|
|
23 00 02 3C 1A
|
|
23 00 02 3D 11
|
|
23 00 02 3E 93
|
|
23 00 02 42 64
|
|
23 00 02 43 64
|
|
23 00 02 44 0B
|
|
23 00 02 46 4E
|
|
23 00 02 8B 90
|
|
23 00 02 8D 45
|
|
23 00 02 91 11
|
|
23 00 02 92 11
|
|
23 00 02 93 9F
|
|
23 00 02 9A 00
|
|
23 00 02 9C 80
|
|
29 00 06 47 0F 24 2C 39 36
|
|
29 00 06 5A 0F 24 2C 39 36
|
|
29 00 06 4C 4A 40 51 31 2F
|
|
29 00 06 51 2D 10 25 1F 30
|
|
29 00 05 56 37 46 5B 7F
|
|
29 00 05 69 37 46 5B 7F
|
|
23 00 02 EE 70
|
|
29 00 05 00 03 07 00 01
|
|
29 00 05 04 08 0C 55 01
|
|
29 00 03 0C 05 3D
|
|
29 00 06 10 05 08 00 01 05
|
|
29 00 06 15 00 15 0D 08 00
|
|
29 00 03 29 05 3D
|
|
29 00 06 60 3C 3C 07 05 17
|
|
29 00 06 65 15 13 11 01 03
|
|
29 00 06 6A 3C 3C 3C 3C 3C
|
|
29 00 06 6F 3C 3C 3C 3C 3C
|
|
29 00 03 74 3C 3C
|
|
29 00 06 80 3C 3C 06 04 16
|
|
29 00 06 85 14 12 10 00 02
|
|
29 00 06 8A 3C 3C 3C 3C 3C
|
|
29 00 06 8F 3C 3C 3C 3C 3C
|
|
29 00 03 94 3C 3C
|
|
29 00 03 EA 00 00
|
|
23 00 02 EE 00
|
|
05 78 01 11
|
|
05 1E 01 29
|
|
];
|
|
|
|
panel-exit-sequence = [
|
|
05 00 01 28
|
|
05 00 01 10
|
|
];
|
|
};
|
|
|
|
&dsi0_timing0 {
|
|
clock-frequency = <67200000>;
|
|
hactive = <800>;
|
|
vactive = <1280>;
|
|
hfront-porch = <80>;
|
|
hsync-len = <20>;
|
|
hback-porch = <20>;
|
|
vfront-porch = <15>;
|
|
vsync-len = <6>;
|
|
vback-porch = <8>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <0>;
|
|
pixelclk-active = <1>;
|
|
};
|
|
|
|
&dsi0_in_vp2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi0_in_vp3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&route_dsi0 {
|
|
status = "disabled";
|
|
connect = <&vp2_out_dsi0>;
|
|
};
|
|
|
|
&pwm11 {
|
|
pinctrl-0 = <&pwm11m1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&backlight {
|
|
pwms = <&pwm11 0 25000 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&vcc3v3_lcd_n {
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c6 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mipi_dcphy1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi1_panel {
|
|
/delete-property/ power-supply;
|
|
|
|
status = "disabled";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dsi1_panel_enable>;
|
|
enable-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
|
|
enable-delay-ms = <200>;
|
|
prepare-delay-ms = <200>;
|
|
unprepare-delay-ms = <200>;
|
|
disable-delay-ms = <200>;
|
|
|
|
dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
|
|
MIPI_DSI_MODE_EOT_PACKET)>;
|
|
|
|
/delete-property/ panel-init-sequence;
|
|
/delete-property/ panel-exit-sequence;
|
|
};
|
|
|
|
&dsi1_in_vp2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi1_in_vp3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&route_dsi1 {
|
|
status = "disabled";
|
|
connect = <&vp3_out_dsi1>;
|
|
};
|
|
|
|
&dsi1_timing0 {
|
|
clock-frequency = <62500000>;
|
|
hactive = <1024>;
|
|
vactive = <768>;
|
|
hback-porch = <29>;
|
|
hfront-porch = <136>;
|
|
hsync-len = <24>;
|
|
vback-porch = <29>;
|
|
vfront-porch = <3>;
|
|
vsync-len = <6>;
|
|
hsync-active = <1>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <0>;
|
|
};
|
|
|
|
&vcc3v3_lcd_n {
|
|
status = "disabled";
|
|
};
|
|
|
|
&spi4m2_pins {
|
|
rockchip,pins = <1 RK_PA2 8 &pcfg_pull_none>, /*spi4_clk_m2*/
|
|
<1 RK_PA0 8 &pcfg_pull_none>, /*spi4_miso_m2*/
|
|
<1 RK_PA1 8 &pcfg_pull_none>, /*spi4_mosi_m2*/
|
|
<1 RK_PA3 8 &pcfg_pull_none>; /*spi4_cs0_m2*/
|
|
};
|
|
|
|
&spi4 {
|
|
status = "disabled";
|
|
num-cs = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi4m2_pins>;
|
|
|
|
xpt2046@0 {
|
|
reg = <0>;
|
|
compatible = "ti,ads7846";
|
|
spi-max-frequency = <1500000>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PD0 0>;
|
|
pendown-gpio = <&gpio0 RK_PD0 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&xpt2046_int>;
|
|
status = "okay";
|
|
|
|
ti,x-min = /bits/ 16 <0>;
|
|
ti,x-max = /bits/ 16 <0xfff>;
|
|
ti,y-min = /bits/ 16 <0>;
|
|
ti,y-max = /bits/ 16 <0xfff>;
|
|
ti,x-plate-ohms = /bits/ 16 <180>;
|
|
ti,pressure-max = /bits/ 16 <512>;
|
|
ti,debounce-max = /bits/ 16 <10>;
|
|
ti,debounce-tol = /bits/ 16 <30>;
|
|
ti,debounce-rep = /bits/ 16 <1>;
|
|
ti,settle-delay-usec = /bits/ 16 <150>;
|
|
ti,keep-vref-on = <1>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_net_power
|
|
&wdog_set
|
|
&wdog_wdi
|
|
&rm500q_pins
|
|
&som_led0
|
|
&som_led1
|
|
&wifi6_reset>;
|
|
|
|
leds {
|
|
user_led0_pin: user-led0-pin {
|
|
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
user_led1_pin: user-led1-pin {
|
|
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
som_led0: som-led0 {
|
|
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
som_led1: som-led1 {
|
|
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
user_key_pin: user-key-pin {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb_net {
|
|
usb_net_power: usb-net-power {
|
|
rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
gmac0-phy-reset {
|
|
gmac0_phy_reset: gmac0-phy-reset {
|
|
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
gmac1-phy-reset {
|
|
gmac1_phy_reset: gmac1-phy-reset {
|
|
rockchip,pins = <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
rs442-uart8 {
|
|
uart8_re: uart8-re {
|
|
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
uart8_de: uart8-de {
|
|
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
rs442-uart9 {
|
|
uart9_re: uart9-re {
|
|
rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
uart9_de: uart9-de {
|
|
rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wdog {
|
|
wdog_set: wdog-set {
|
|
rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
wdog_wdi: wdog-wdi {
|
|
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
xl2515 {
|
|
xl2515_int0: xl2515-int0 {
|
|
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
xl2515_int1: xl2515-int1 {
|
|
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
rm500q {
|
|
rm500q_pins: rm500q-pins {
|
|
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>, /* power */
|
|
<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; /* reset */
|
|
};
|
|
};
|
|
|
|
typec-dp {
|
|
typec_sbu1: typec-sbu1 {
|
|
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
typec_sbu2: typec-sbu2 {
|
|
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
vcc5v0_typec_enable: vcc5v0-typec-enable {
|
|
rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
typec_int: typec-int {
|
|
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
dsi0 {
|
|
dsi0_panel_reset: dsi0-panel-reset {
|
|
rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
gt911_int: gt911-int {
|
|
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
gt911_reset: gt911-reset {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
dsi1 {
|
|
dsi1_panel_enable: dsi1-panel-enable {
|
|
rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
xpt2046_int: xpt2046-int {
|
|
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wifi6 {
|
|
wifi6_reset: wifi6-reset {
|
|
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&work_led {
|
|
status = "disabled";
|
|
};
|
|
|
|
&wireless_bluetooth {
|
|
status = "disabled";
|
|
};
|
|
|
|
&vcc_mipicsi1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&sdio_pwrseq {
|
|
status = "disabled";
|
|
};
|
|
|
|
&wireless_wlan {
|
|
status = "disabled";
|
|
};
|
|
|
|
|
|
|
|
|