/*
 * Copyright (C) 2015 GuangZhou Tronlong co., LTD - http://www.tronlong.com
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "tl3588-evm.dts"
#include <dt-bindings/display/media-bus-format.h>

/ {
        model = "TL3588-EVM-EDP";

        edp1_panel: edp1-panel {
                compatible = "simple-panel";
                bus-format = <MEDIA_BUS_FMT_RGB666_1X18>;
                bpc = <6>;
                backlight = <&backlight>;
                enable-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
                prepare-delay-ms = <120>;                               // 准备时间延迟，单位为毫秒
                enable-delay-ms = <120>;                                // 启用时间延迟，单位为毫秒
                unprepare-delay-ms = <120>;                             // 取消准备时间延迟，单位为毫秒
                disable-delay-ms = <120>; 
                status = "okay";

                display-timings {
                        native-mode = <&timing1>;                        
                        timing1: timing1 {
                                clock-frequency = <154760000>;
                                hactive = <1920>;
                                vactive = <1200>;
                                hfront-porch = <48>;
                                hsync-len = <8>;
                                hback-porch = <80>;
                                vfront-porch = <10>;
                                vsync-len = <3>;
                                vback-porch = <23>;
                                hsync-active = <0>;
                                vsync-active = <0>;
                                de-active = <0>;
                                pixelclk-active = <0>;
                        };
                };
                
                port {
                        panel_in_edp1: endpoint {
                                remote-endpoint = <&edp1_out_panel>;
                        };
                };
        };
};

&hdptxphy1 {
        status = "okay";
};

&edp1 {
        status = "okay";
        force-hpd;

        ports {
                port@1 {
                        reg = <1>;
                        edp1_out_panel: endpoint {
                                remote-endpoint = <&panel_in_edp1>;
                        };
                };
        };
};

&edp1_in_vp0 {
        status = "disabled";
};

&edp1_in_vp1 {
        status = "disabled";
};

&edp1_in_vp2 {
        status = "okay";
};

&route_edp1 {
        status = "okay";
        connect = <&vp2_out_edp1>;
};