50 lines
1.8 KiB
Plaintext
Raw Normal View History

2026-01-21 18:59:54 +08:00
Bindings for Voltage controlled regulators
==========================================
Required properties:
--------------------
- compatible : must be "vctrl-regulator".
- regulator-min-microvolt : smallest voltage consumers may set
- regulator-max-microvolt : largest voltage consumers may set
- ctrl-supply : The regulator supplying the control voltage.
- ctrl-voltage-range : an array of two integer values describing the range
(min/max) of the control voltage. The values specify
the control voltage needed to generate the corresponding
regulator-min/max-microvolt output voltage.
Optional properties:
--------------------
- ovp-threshold-percent : overvoltage protection (OVP) threshold of the
regulator in percent. Some regulators have an OVP
circuitry which shuts down the regulator when the
actual output voltage deviates beyond a certain
margin from the expected value for a given control
voltage. On larger voltage decreases this can occur
undesiredly since the output voltage does not adjust
2026-01-29 22:25:33 +08:00
immediately to changes in the control voltage. To
2026-01-21 18:59:54 +08:00
avoid this situation the vctrl driver breaks down
larger voltage decreases into multiple steps, where
each step is within the OVP threshold.
- min-slew-down-rate : Describes how slowly the regulator voltage will decay
down in the worst case (lightest expected load).
Specified in uV / us (like main regulator ramp rate).
This value is required when ovp-threshold-percent is
specified.
Example:
vctrl-reg {
compatible = "vctrl-regulator";
regulator-name = "vctrl_reg";
ctrl-supply = <&ctrl_reg>;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
ctrl-voltage-range = <200000 500000>;
min-slew-down-rate = <225>;
ovp-threshold-percent = <16>;
};