openEuler/openEuler_kernel_rk3588
3
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
openEuler_kernel_rk3588/Documentation/ABI/testing/sysfs-driver-ufs

1477 lines
60 KiB
Plaintext
Raw Normal View History

new
2026-01-21 18:59:54 +08:00
What: /sys/bus/*/drivers/ufshcd/*/auto_hibern8
Date: March 2018
Contact: linux-scsi@vger.kernel.org
Description:
This file contains the auto-hibernate idle timer setting of a
UFS host controller. A value of '0' means auto-hibernate is not
enabled. Otherwise the value is the number of microseconds of
idle time before the UFS host controller will autonomously put
the link into hibernate state. That will save power at the
expense of increased latency. Note that the hardware supports
10-bit values with a power-of-ten multiplier which allows a
maximum value of 102300000. Refer to the UFS Host Controller
Interface specification for more details.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_type
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device type. This is one of the UFS
device descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_class
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device class. This is one of the UFS
device descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_sub_class
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the UFS storage subclass. This is one of
the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/protocol
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the protocol supported by an UFS device.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/number_of_luns
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows number of logical units. This is one of
the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/number_of_wluns
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows number of well known logical units.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/boot_enable
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows value that indicates whether the device is
enabled for boot. This is one of the UFS device descriptor
parameters. The full information about the descriptor could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/descriptor_access_enable
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows value that indicates whether the device
descriptor could be read after partial initialization phase
of the boot sequence. This is one of the UFS device descriptor
parameters. The full information about the descriptor could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/initial_power_mode
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows value that defines the power mode after
device initialization or hardware reset. This is one of
the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/high_priority_lun
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the high priority lun. This is one of
the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/secure_removal_type
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the secure removal type. This is one of
the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/support_security_lun
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the security lun is supported.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/bkops_termination_latency
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the background operations termination
latency. This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/initial_active_icc_level
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the initial active ICC level. This is one
of the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/specification_version
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the specification version. This is one
of the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/manufacturing_date
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the manufacturing date in BCD format.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/manufacturer_id
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
init
2026-01-29 22:25:33 +08:00
Description: This file shows the manufacturer ID. This is one of the
new
2026-01-21 18:59:54 +08:00
UFS device descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/rtt_capability
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum number of outstanding RTTs
supported by the device. This is one of the UFS device
descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/rtc_update
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the frequency and method of the realtime
clock update. This is one of the UFS device descriptor
parameters. The full information about the descriptor
could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/ufs_features
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows which features are supported by the device.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be
found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/ffu_timeout
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the FFU timeout. This is one of the
UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/queue_depth
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device queue depth. This is one of the
UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_version
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device version. This is one of the
UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/number_of_secure_wpa
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows number of secure write protect areas
supported by the device. This is one of the UFS device
descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/psa_max_data_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum amount of data that may be
written during the pre-soldering phase of the PSA flow.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/psa_state_timeout
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the command maximum timeout for a change
in PSA state. This is one of the UFS device descriptor
parameters. The full information about the descriptor could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/interconnect_descriptor/unipro_version
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the MIPI UniPro version number in BCD format.
This is one of the UFS interconnect descriptor parameters.
The full information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/interconnect_descriptor/mphy_version
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the MIPI M-PHY version number in BCD format.
This is one of the UFS interconnect descriptor parameters.
The full information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/raw_device_capacity
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/raw_device_capacity
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the total memory quantity available to
the user to configure the device logical units. This is one
of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_number_of_luns
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum number of logical units
supported by the UFS device. This is one of the UFS
geometry descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/segment_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the segment size. This is one of the UFS
geometry descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/allocation_unit_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the allocation unit size. This is one of
the UFS geometry descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/min_addressable_block_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the minimum addressable block size. This
is one of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at UFS
specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/optimal_read_block_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the optimal read block size. This is one
of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at UFS
specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/optimal_write_block_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the optimal write block size. This is one
of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at UFS
specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_in_buffer_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum data-in buffer size. This
is one of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at UFS
specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_out_buffer_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum data-out buffer size. This
is one of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at UFS
specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/rpmb_rw_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum number of RPMB frames allowed
in Security Protocol In/Out. This is one of the UFS geometry
descriptor parameters. The full information about the
descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/dyn_capacity_resource_policy
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the dynamic capacity resource policy. This
is one of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/data_ordering
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows support for out-of-order data transfer.
This is one of the UFS geometry descriptor parameters.
The full information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_number_of_contexts
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows maximum available number of contexts which
are supported by the device. This is one of the UFS geometry
descriptor parameters. The full information about the
descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/sys_data_tag_unit_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows system data tag unit size. This is one of
the UFS geometry descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/sys_data_tag_resource_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows maximum storage area size allocated by
the device to handle system data by the tagging mechanism.
This is one of the UFS geometry descriptor parameters.
The full information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/secure_removal_types
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows supported secure removal types. This is
one of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/memory_types
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows supported memory types. This is one of
the UFS geometry descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/*_memory_max_alloc_units
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum number of allocation units for
different memory types (system code, non persistent,
enhanced type 1-4). This is one of the UFS geometry
descriptor parameters. The full information about the
descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/*_memory_capacity_adjustment_factor
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the memory capacity adjustment factor for
different memory types (system code, non persistent,
enhanced type 1-4). This is one of the UFS geometry
descriptor parameters. The full information about the
descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/eol_info
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/health_descriptor/eol_info
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows preend of life information. This is one
of the UFS health descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/health_descriptor/life_time_estimation_a
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows indication of the device life time
(method a). This is one of the UFS health descriptor
parameters. The full information about the descriptor
could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/health_descriptor/life_time_estimation_b
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows indication of the device life time
(method b). This is one of the UFS health descriptor
parameters. The full information about the descriptor
could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/power_descriptor/active_icc_levels_vcc*
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/power_descriptor/active_icc_levels_vcc*
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows maximum VCC, VCCQ and VCCQ2 value for
active ICC levels from 0 to 15. This is one of the UFS
power descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/manufacturer_name
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/string_descriptors/manufacturer_name
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
init
2026-01-29 22:25:33 +08:00
Description: This file contains a device manufacturer name string.
new
2026-01-21 18:59:54 +08:00
The full information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/string_descriptors/product_name
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file contains a product name string. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/string_descriptors/oem_id
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file contains a OEM ID string. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/string_descriptors/serial_number
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file contains a device serial number string. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/string_descriptors/product_revision
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file contains a product revision string. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/boot_lun_id
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows boot LUN information. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows LUN write protection status. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows LUN queue depth. This is one of the UFS
unit descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows PSA sensitivity. This is one of the UFS
unit descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows LUN memory type. This is one of the UFS
unit descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file defines the device behavior when a power failure
occurs during a write operation. This is one of the UFS
unit descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the size of addressable logical blocks
(calculated as an exponent with base 2). This is one of
the UFS unit descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows total number of addressable logical blocks.
This is one of the UFS unit descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the erase block size. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the thin provisioning type. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the total physical memory resources. This is
one of the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the context capabilities. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the granularity of the LUN. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/device_init
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/device_init
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device init status. The full information
about the flag could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/permanent_wpe
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether permanent write protection is enabled.
The full information about the flag could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/power_on_wpe
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether write protection is enabled on all
logical units configured as power on write protected. The
full information about the flag could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/bkops_enable
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the device background operations are
enabled. The full information about the flag could be
found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/life_span_mode_enable
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the device life span mode is enabled.
The full information about the flag could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/phy_resource_removal
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether physical resource removal is enable.
The full information about the flag could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/busy_rtc
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the device is executing internal
operation related to real time clock. The full information
about the flag could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/disable_fw_update
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the device FW update is permanently
disabled. The full information about the flag could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/boot_lun_enabled
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the boot lun enabled UFS device attribute.
The full information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/current_power_mode
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the current power mode UFS device attribute.
The full information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/active_icc_level
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the active icc level UFS device attribute.
The full information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/ooo_data_enabled
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the out of order data transfer enabled UFS
device attribute. The full information about the attribute
could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/bkops_status
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the background operations status UFS device
attribute. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/purge_status
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the purge operation status UFS device
attribute. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/max_data_in_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum data size in a DATA IN
UPIU. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/max_data_out_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum number of bytes that can be
requested with a READY TO TRANSFER UPIU. The full information
about the attribute could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/reference_clock_frequency
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the reference clock frequency UFS device
attribute. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/configuration_descriptor_lock
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the configuration descriptor is locked.
The full information about the attribute could be found at
UFS specifications 2.1. The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/max_number_of_rtt
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the maximum current number of
outstanding RTTs in device that is allowed. The full
information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/exception_event_control
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the exception event control UFS device
attribute. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/exception_event_status
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the exception event status UFS device
attribute. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/ffu_status
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the ffu status UFS device attribute.
The full information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/psa_state
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file show the PSA feature status. The full information
about the attribute could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/psa_data_size
new
2026-01-21 18:59:54 +08:00
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the amount of data that the host plans to
load to all logical units in pre-soldering state.
The full information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/dyn_cap_needed
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
init
2026-01-29 22:25:33 +08:00
Description: This file shows the amount of physical memory needed
new
2026-01-21 18:59:54 +08:00
to be removed from the physical memory resources pool of
the particular logical unit. The full information about
the attribute could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/rpm_lvl
new
2026-01-21 18:59:54 +08:00
Date: September 2014
init
2026-01-29 22:25:33 +08:00
Contact: Can Guo <quic_cang@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry could be used to set or show the UFS device
runtime power management level. The current driver
init
2026-01-29 22:25:33 +08:00
implementation supports 7 levels with next target states:
new
2026-01-21 18:59:54 +08:00
== ====================================================
init
2026-01-29 22:25:33 +08:00
0 UFS device will stay active, UIC link will
new
2026-01-21 18:59:54 +08:00
stay active
init
2026-01-29 22:25:33 +08:00
1 UFS device will stay active, UIC link will
new
2026-01-21 18:59:54 +08:00
hibernate
init
2026-01-29 22:25:33 +08:00
2 UFS device will be moved to sleep, UIC link will
new
2026-01-21 18:59:54 +08:00
stay active
init
2026-01-29 22:25:33 +08:00
3 UFS device will be moved to sleep, UIC link will
new
2026-01-21 18:59:54 +08:00
hibernate
init
2026-01-29 22:25:33 +08:00
4 UFS device will be powered off, UIC link will
new
2026-01-21 18:59:54 +08:00
hibernate
init
2026-01-29 22:25:33 +08:00
5 UFS device will be powered off, UIC link will
new
2026-01-21 18:59:54 +08:00
be powered off
init
2026-01-29 22:25:33 +08:00
6 UFS device will be moved to deep sleep, UIC link
will be powered off. Note, deep sleep might not be
supported in which case this value will not be
accepted
new
2026-01-21 18:59:54 +08:00
== ====================================================
What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/rpm_target_dev_state
new
2026-01-21 18:59:54 +08:00
Date: February 2018
init
2026-01-29 22:25:33 +08:00
Contact: Can Guo <quic_cang@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the target power mode of an UFS device
for the chosen runtime power management level.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/rpm_target_link_state
new
2026-01-21 18:59:54 +08:00
Date: February 2018
init
2026-01-29 22:25:33 +08:00
Contact: Can Guo <quic_cang@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the target state of an UFS UIC link
for the chosen runtime power management level.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/spm_lvl
new
2026-01-21 18:59:54 +08:00
Date: September 2014
init
2026-01-29 22:25:33 +08:00
Contact: Can Guo <quic_cang@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry could be used to set or show the UFS device
system power management level. The current driver
init
2026-01-29 22:25:33 +08:00
implementation supports 7 levels with next target states:
new
2026-01-21 18:59:54 +08:00
== ====================================================
init
2026-01-29 22:25:33 +08:00
0 UFS device will stay active, UIC link will
new
2026-01-21 18:59:54 +08:00
stay active
init
2026-01-29 22:25:33 +08:00
1 UFS device will stay active, UIC link will
new
2026-01-21 18:59:54 +08:00
hibernate
init
2026-01-29 22:25:33 +08:00
2 UFS device will be moved to sleep, UIC link will
new
2026-01-21 18:59:54 +08:00
stay active
init
2026-01-29 22:25:33 +08:00
3 UFS device will be moved to sleep, UIC link will
new
2026-01-21 18:59:54 +08:00
hibernate
init
2026-01-29 22:25:33 +08:00
4 UFS device will be powered off, UIC link will
new
2026-01-21 18:59:54 +08:00
hibernate
init
2026-01-29 22:25:33 +08:00
5 UFS device will be powered off, UIC link will
new
2026-01-21 18:59:54 +08:00
be powered off
init
2026-01-29 22:25:33 +08:00
6 UFS device will be moved to deep sleep, UIC link
will be powered off. Note, deep sleep might not be
supported in which case this value will not be
accepted
new
2026-01-21 18:59:54 +08:00
== ====================================================
What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/spm_target_dev_state
new
2026-01-21 18:59:54 +08:00
Date: February 2018
init
2026-01-29 22:25:33 +08:00
Contact: Can Guo <quic_cang@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the target power mode of an UFS device
for the chosen system power management level.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/spm_target_link_state
new
2026-01-21 18:59:54 +08:00
Date: February 2018
init
2026-01-29 22:25:33 +08:00
Contact: Can Guo <quic_cang@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the target state of an UFS UIC link
for the chosen system power management level.
The file is read only.
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable
What: /sys/bus/platform/devices/*.ufs/monitor/monitor_enable
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the status of performance monitor enablement
and it can be used to start/stop the monitor. When the monitor
is stopped, the performance data collected is also cleared.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size
What: /sys/bus/platform/devices/*.ufs/monitor/monitor_chunk_size
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file tells the monitor to focus on requests transferring
data of specific chunk size (in Bytes). 0 means any chunk size.
It can only be changed when monitor is disabled.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors
What: /sys/bus/platform/devices/*.ufs/monitor/read_total_sectors
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many sectors (in 512 Bytes) have been
sent from device to host after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy
What: /sys/bus/platform/devices/*.ufs/monitor/read_total_busy
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how long (in micro seconds) has been spent
sending data from device to host after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests
What: /sys/bus/platform/devices/*.ufs/monitor/read_nr_requests
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many read requests have been sent after
monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_max
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the maximum latency (in micro seconds) of
read requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_min
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the minimum latency (in micro seconds) of
read requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_avg
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the average latency (in micro seconds) of
read requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_sum
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the total latency (in micro seconds) of
read requests sent after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors
What: /sys/bus/platform/devices/*.ufs/monitor/write_total_sectors
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many sectors (in 512 Bytes) have been sent
from host to device after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy
What: /sys/bus/platform/devices/*.ufs/monitor/write_total_busy
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how long (in micro seconds) has been spent
sending data from host to device after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests
What: /sys/bus/platform/devices/*.ufs/monitor/write_nr_requests
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many write requests have been sent after
monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_max
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the maximum latency (in micro seconds) of write
requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_min
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the minimum latency (in micro seconds) of write
requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_avg
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the average latency (in micro seconds) of write
requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the total latency (in micro seconds) of write
requests after monitor gets started.
The file is read only.
new
2026-01-21 18:59:54 +08:00
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows if preserve user-space was configured
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_shared_alloc_units
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the shared allocated units of WB buffer
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_type
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the configured WB type.
0x1 for shared buffer mode. 0x0 for dedicated buffer mode.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_buff_cap_adj
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the total user-space decrease in shared
buffer mode.
The value of this parameter is 3 for TLC NAND when SLC mode
is used as WriteBooster Buffer. 2 for MLC NAND.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_alloc_units
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the Maximum total WriteBooster Buffer size
which is supported by the entire device.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_wb_luns
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the maximum number of luns that can support
WriteBooster.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_red_type
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: The supportability of user space reduction mode
and preserve user space mode.
00h: WriteBooster Buffer can be configured only in
user space reduction type.
01h: WriteBooster Buffer can be configured only in
preserve user space type.
02h: Device can be configured in either user space
reduction type or preserve user space type.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_wb_type
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: The supportability of WriteBooster Buffer type.
=== ==========================================================
00h LU based WriteBooster Buffer configuration
01h Single shared WriteBooster Buffer configuration
02h Supporting both LU based WriteBooster.
Buffer and Single shared WriteBooster Buffer configuration
=== ==========================================================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_enable
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/wb_enable
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the status of WriteBooster.
== ============================
0 WriteBooster is not enabled.
1 WriteBooster is enabled
== ============================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/wb_flush_en
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows if flush is enabled.
== =================================
0 Flush operation is not performed.
1 Flush operation is performed.
== =================================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/flags/wb_flush_during_h8
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: Flush WriteBooster Buffer during hibernate state.
== =================================================
0 Device is not allowed to flush the
WriteBooster Buffer during link hibernate state.
1 Device is allowed to flush the
WriteBooster Buffer during link hibernate state.
== =================================================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/wb_avail_buf
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the amount of unused WriteBooster buffer
available.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/wb_cur_buf
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the amount of unused current buffer.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/wb_flush_status
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the flush operation status.
=== ======================================
00h idle
01h Flush operation in progress
02h Flush operation stopped prematurely.
03h Flush operation completed successfully
04h Flush operation general failure
=== ======================================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/devices/*.ufs/attributes/wb_life_time_est
new
2026-01-21 18:59:54 +08:00
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows an indication of the WriteBooster Buffer
lifetime based on the amount of performed program/erase cycles
=== =============================================
01h 0% - 10% WriteBooster Buffer life time used
...
0Ah 90% - 100% WriteBooster Buffer life time used
=== =============================================
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units
Date: June 2020
init
2026-01-29 22:25:33 +08:00
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
new
2026-01-21 18:59:54 +08:00
Description: This entry shows the configured size of WriteBooster buffer.
0400h corresponds to 4GB.
The file is read only.
init
2026-01-29 22:25:33 +08:00
What: /sys/bus/platform/drivers/ufshcd/*/wb_on
What: /sys/bus/platform/devices/*.ufs/wb_on
Date: January 2021
Contact: Bean Huo <beanhuo@micron.com>
Description: This node is used to set or display whether UFS WriteBooster is
enabled. Echo 0 to this file to disable UFS WriteBooster or 1 to
enable it. The WriteBooster is enabled after power-on/reset,
however, it will be disabled/enable while CLK scaling down/up
(if the platform supports UFSHCD_CAP_CLK_SCALING). For a
platform that doesn't support UFSHCD_CAP_CLK_SCALING, we can
disable/enable WriteBooster through this sysfs node.
What: /sys/bus/platform/drivers/ufshcd/*/enable_wb_buf_flush
What: /sys/bus/platform/devices/*.ufs/enable_wb_buf_flush
Date: July 2022
Contact: Jinyoung Choi <j-young.choi@samsung.com>
Description: This entry shows the status of WriteBooster buffer flushing
and it can be used to enable or disable the flushing.
If flushing is enabled, the device executes the flush
operation when the command queue is empty.
What: /sys/bus/platform/drivers/ufshcd/*/wb_flush_threshold
What: /sys/bus/platform/devices/*.ufs/wb_flush_threshold
Date: June 2023
Contact: Lu Hongfei <luhongfei@vivo.com>
Description:
wb_flush_threshold represents the threshold for flushing WriteBooster buffer,
whose value expressed in unit of 10% granularity, such as '1' representing 10%,
'2' representing 20%, and so on.
If avail_wb_buff < wb_flush_threshold, it indicates that WriteBooster buffer needs to
be flushed, otherwise it is not necessary.
Contact: Daniil Lunev <dlunev@chromium.org>
What: /sys/bus/platform/drivers/ufshcd/*/capabilities/
What: /sys/bus/platform/devices/*.ufs/capabilities/
Date: August 2022
Description: The group represents the effective capabilities of the
host-device pair. i.e. the capabilities which are enabled in the
driver for the specific host controller, supported by the host
controller and are supported and/or have compatible
configuration on the device side.
Contact: Daniil Lunev <dlunev@chromium.org>
What: /sys/bus/platform/drivers/ufshcd/*/capabilities/clock_scaling
What: /sys/bus/platform/devices/*.ufs/capabilities/clock_scaling
Date: August 2022
Contact: Daniil Lunev <dlunev@chromium.org>
Description: Indicates status of clock scaling.
== ============================
0 Clock scaling is not supported.
1 Clock scaling is supported.
== ============================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/capabilities/write_booster
What: /sys/bus/platform/devices/*.ufs/capabilities/write_booster
Date: August 2022
Contact: Daniil Lunev <dlunev@chromium.org>
Description: Indicates status of Write Booster.
== ============================
0 Write Booster can not be enabled.
1 Write Booster can be enabled.
== ============================
The file is read only.
Reference in New Issue Copy Permalink