diff --git a/README.en.md b/README.en.md index 456b9ea..5cd580b 100644 --- a/README.en.md +++ b/README.en.md @@ -70,17 +70,13 @@ You can get introduction of openEuler SBC SIG from [sig-SBC](https://gitee.com/o - [openEuler Adaptation Guide](documents/rockchip/openEuler适配指南.md) - [Using RKNPU on openEuler](documents/rockchip/在openEuler上使用RKNPU.md) - [Run RKLLM on openEuler](documents/rockchip/在openEuler上运行RKLLM.md) -- [scripts](./scripts/): - - [Raspberry Pi](./scripts/raspberrypi): Script for building openEuler image for Raspberry Pi - - [Quickly Build (without kernel compilation)](scripts/raspberrypi/build-image.sh) - - [Build on host (with kernel compilation)](scripts/raspberrypi/build-image-common.sh) - - [Build in a Docker container (with kernel compilation)](scripts/raspberrypi/build-image-docker.sh) - - [Rockchip and other SoCs](./scripts/rockchip): Used to build openEuler images for Rockchip and other SoCs - - [One-time build images](scripts/rockchip/build.sh) - - [Build a boot Image](scripts/rockchip/build_boot.sh) - - [Build a rootfs Image](scripts/rockchip/build_rootfs.sh) - - [Compile u-boot](scripts/rockchip/build_u-boot.sh) - - [Generate a bootable image](scripts/rockchip/gen_image.sh) +- [scripts](./scripts/): Script for building openEuler image + - [Build a unified system image](scripts/build.sh) + - [Build a unified system image using Docker](./scripts/build-image-docker.sh) + - [Build a boot Image](scripts/build_boot.sh) + - [Build a rootfs Image](scripts/build_rootfs.sh) + - [Compile u-boot](scripts/build_u-boot.sh) + - [Generate a bootable image](scripts/gen_image.sh) ## How to download latest image @@ -306,38 +302,6 @@ To build openEuler AArch64 image for Raspberry Pi, Rockchip or other SoCs, the r For other architecture hardware, you can use [QEMU](https://www.qemu.org/) to build AArch64 system emulation. ### Run the scripts to build image - -You can use the respective scripts of Raspberry Pi, Rockchip or other SoCs to build images. Refer to the specific documentation: +You can use the unified build scripts [build.sh](./scripts/build.sh) or [build-image-docker.sh](./scripts/build-image-docker.sh) to build images for Raspberry Pi, Rockchip, and other development boards, either directly on the host machine or by launching a Docker container. For details, please refer to the documentation below: - [Build Raspberry Pi images](./documents/树莓派.md#构建镜像) - [Build images for Rochchip and other SoCs](./documents/瑞芯微等开发板.md#镜像构建) - -Alternatively, you can use the unified entry point [build.sh](./scripts/build.sh) to build images for Raspberry Pi, Rockchip or other SoCs by executing the following command: - -`sudo bash scripts/build.sh --board BOARD_TYPE --in-docker [other_args...]` - -Parameter Definitions & Meaning: - -1. `--in-docker` - Build the image using a Docker container. Refer to the links below: - - [Build Raspberry Pi images in Docker](./documents/树莓派.md#docker-容器内构建) - - [Build images for Rockchip or other SoCs in Docker](./documents/瑞芯微等开发板.md#docker-容器内构建) - -2. `--board BOARD_TYPE` - Specifies the development board type. Currently supported parameters include: - - - `rpi`: Build a Raspberry Pi image without compiling the kernel. For other parameters, refer to [Quick build for Raspberry Pi (no kernel compilation)](./documents/树莓派.md#快速构建无需编译内核推荐). - - `rpi-custom`: Build a Raspberry Pi image with kernel compilation. For other parameters, refer to [Build a Raspberry Pi image using a custom-compiled kernel](./documents/树莓派.md#完全构建包括编译内核). - - `firefly-itx-3588j`: Build a Firefly ITX-3588J image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - - `firefly-rk3399`: Build a Firefly RK3399 image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - - `firefly-roc-rk3566-pc`: Build a Firefly ROC-RK3566-PC image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - - `firefly-roc-rk3568-pc`: Build a Firefly ROC-RK3568-PC image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - - `firefly-roc-rk3568-pc-se`: Build a Firefly ROC-RK3568-PC-SE image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - - `firefly-roc-rk3588s-pc`: Build a Firefly ROC-RK3588S-PC image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - - `phytiumpi-4gb`: Build a Phytium Pi 4GB image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - - `radxa-rock5b`: Build a Radxa Rock-5B image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - - `radxa-rockpi-4a`: Build a Radxa RockPi-4A image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - - `orangepi-zero2`: Build a Orange Pi Zero2 image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - - `longanpi-3h`: Build a Sipeed Longan Pi 3H image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). - -3. `-h`, `--help` - Display help information. diff --git a/README.md b/README.md index 3647e15..d2f9198 100644 --- a/README.md +++ b/README.md @@ -69,17 +69,13 @@ SIG 组基本信息位于 [sig-SBC](https://gitee.com/openeuler/community/tree/m - [openEuler 适配指南](documents/rockchip/openEuler适配指南.md) - [在openEuler上使用RKNPU](documents/rockchip/在openEuler上使用RKNPU.md) - [在openEuler上运行RKLLM](documents/rockchip/在openEuler上运行RKLLM.md) -- [scripts](./scripts/): 镜像构建脚本 - - [树莓派](./scripts/raspberrypi): 构建 openEuler 树莓派镜像的脚本 - - [快速构建（不编译内核）](scripts/raspberrypi/build-image.sh) - - [主机上构建（编译内核）](scripts/raspberrypi/build-image-common.sh) - - [Docker 容器中构建（编译内核）](scripts/raspberrypi/build-image-docker.sh) - - [瑞芯微等开发板](./scripts/rockchip): 构建 openEuler RK3399 等开发板镜像的脚本 - - [一次构建脚本](scripts/rockchip/build.sh) - - [boot 镜像构建脚本](scripts/build_boot.sh) - - [rootfs 镜像构建脚本](scripts/build_rootfs.sh) - - [u-boot 编译脚本](scripts/rockchip/build_u-boot.sh) - - [可启动镜像生成脚本](scripts/rockchip/gen_image.sh) +- [scripts](./scripts/): openEuler 镜像构建脚本 + - [构建完整镜像](scripts/build.sh) + - [使用 Docker 构建完整镜像](./scripts/build-image-docker.sh) + - [构建 boot 镜像](scripts/build_boot.sh) + - [构建 rootfs 镜像](scripts/build_rootfs.sh) + - [编译 u-boot](scripts/build_u-boot.sh) + - [将 u-boot、boot、rootfs 合并成一个完整镜像](scripts/gen_image.sh) ## 最新镜像 @@ -305,37 +301,6 @@ SIG 组基本信息位于 [sig-SBC](https://gitee.com/openeuler/community/tree/m 其他架构可以使用 [QEMU](https://www.qemu.org/) 模拟器搭建 AArch64 运行环境。 ### 构建镜像 - -可以使用树莓派或瑞芯微等开发板各自的脚本构建镜像，具体文档参考： +镜像构建使用统一入口 [build.sh](./scripts/build.sh) 或 [build-image-docker.sh](./scripts/build-image-docker.sh) 在宿主机或者启动 Docker 容器构建树莓派或瑞芯微等开发板镜像。具体参考以下文档： - [树莓派镜像构建](./documents/树莓派.md#构建镜像) - [瑞芯微等开发板镜像构建](./documents/瑞芯微等开发板.md#镜像构建) - -也可以使用统一入口 [build.sh](./scripts/build.sh) 构建树莓派或瑞芯微等开发板镜像，执行命令： - -`sudo bash scripts/build.sh --board BOARD_TYPE --in-docker [other_args...]` - -各个参数含义： - -1. --in-docker - 使用 Docker 容器构建镜像，参考链接： - - [使用 Docker 容器构建树莓派镜像](./documents/树莓派.md#docker-容器内构建) - - [使用 Docker 容器构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#docker-容器内构建) - -2. --board BOARD_TYPE - 开发板类型和构建方式。当前支持的参数有： - - rpi，无需编译内核直接构建树莓派镜像，其他参数请参考 [无需编译内核快速构建树莓派镜像](./documents/树莓派.md#快速构建无需编译内核推荐)。 - - rpi-custom，编译内核并构建树莓派镜像，其他参数请参考 [编译内核构建树莓派镜像](./documents/树莓派.md#完全构建包括编译内核)。 - - firefly-itx-3588j，构建 Firefly ITX-3588J 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - - firefly-rk3399，构建 Firefly RK3399 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - - firefly-roc-rk3566-pc，构建 Firefly ROC-RK3566-PC 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - - firefly-roc-rk3568-pc，构建 Firefly ROC-RK3568-PC 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - - firefly-roc-rk3568-pc-se，构建 Firefly ROC-RK3568-PC-SE 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - - firefly-roc-rk3588s-pc，构建 Firefly ROC-RK3588S-PC 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - - phytiumpi-4gb，构建 Phytium Pi 4GB 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - - radxa-rock5b，构建 Radxa Rock-5B 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - - radxa-rockpi-4a，构建 Radxa RockPi-4A 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - - orangepi-zero2，构建 Orange Pi Zero2 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - - longanpi-3h，构建 Sipeed Longan Pi 3H 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 - -3. -h, --help - 显示帮助信息。 diff --git a/documents/rockchip/openEuler适配指南.md b/documents/rockchip/openEuler适配指南.md index ea5b674..f5f311b 100644 --- a/documents/rockchip/openEuler适配指南.md +++ b/documents/rockchip/openEuler适配指南.md @@ -36,7 +36,7 @@ ### 使用 BSP 内核 -如果想使用 BSP 内核进行测试，可以在构建指令中指定 BSP 内核的仓库地址及对应分支，参考[一次构建](../瑞芯微等开发板.md#一次构建)。 +如果想使用 BSP 内核进行测试，可以在构建指令中指定 BSP 内核的仓库地址及对应分支，参考 [构建完整镜像](../瑞芯微等开发板.md#构建完整镜像)。 ## 准备 u-boot @@ -46,17 +46,17 @@ - RK35xx - 需要将编译好的 u-boot 二进制文件放到 [u-boot 目录](../../scripts/rockchip/bin/u-boot/)下，并在版型文件中增加文件路径。 + 需要将编译好的 u-boot 二进制文件放到 [u-boot 目录](../../scripts/bin/u-boot/)下，并在版型文件中增加文件路径。 ## 准备 firmware 文件 -这里提到的 firmware 是开发板的板载蓝牙和 WiFi 的驱动固件，可参考[本框架储存的的 firmware 文件](../../scripts/rockchip/bin/linux-firmware/)。 +这里提到的 firmware 是开发板的板载蓝牙和 WiFi 的驱动固件，可参考[本框架储存的的 firmware 文件](../../scripts/bin/linux-firmware/)。 请确定开发板所使用的 firmware，并提交至仓库的相应目录下。 ## 编写版型文件 -适用的开发板的版型配置文件在 [boards](../../scripts/rockchip/boards/) 文件夹中，版型文件示例如下： +适用的开发板的版型配置文件在 [boards](../../scripts/boards/) 文件夹中，版型文件示例如下： ``` ubootconfig=firefly-rk3399_defconfig #Required! The name of defconfig file when compiling u-boot, which defaults to firefly-rk3399_defconfig. @@ -77,13 +77,13 @@ POST_BOARD_OVERLAY() { 1. ubootconfig=UBOOT_DEFCONFIG - 开发板对应的 defconfig 的文件名称，对应 [u-boot/configs](https://github.com/u-boot/u-boot/tree/master/configs) 下 `UBOOT_DEFCONFIG` 文件，默认为 `firefly-rk3399_defconfig`；如需在 RK3568/RK3588 开发板上使用预编译的 u-boot，可以将此项设置为 `none`。 + 开发板对应的 defconfig 的文件名称，对应 [u-boot/configs](https://github.com/u-boot/u-boot/tree/master/configs) 下 `UBOOT_DEFCONFIG` 文件，默认为 `firefly-rk3399_defconfig`；如需在 RK3568/RK3588 开发板上使用预编译的 u-boot，可以将此项设置为空：`ubootconfig=`。 - 如果设置为 `none`，则还需添加以下附属配置参数： + 如果设置为空 ``，则还需添加以下附属配置参数： - local_uboot_dir - 开发板 u-boot 配置设置为 `none` 时，本地预编译的 u-boot 二进制文件的位置。 + 开发板 u-boot 配置设置为空时，本地预编译的 u-boot 二进制文件的位置。 2. dtb_name=DTB_NAME @@ -114,11 +114,11 @@ POST_BOARD_OVERLAY() { 6. POST_BOARD_OVERLAY() - `POST_BOARD_OVERLAY()` 是执行复制 firmware 文件到根目录以及对目标开发板根目录执行特定操作的函数，其使用的变量与 [build_rootfs.sh](../../scripts/rockchip/build_rootfs.sh) 相同，通常包含以下两个变量： + `POST_BOARD_OVERLAY()` 是执行复制 firmware 文件到根目录以及对目标开发板根目录执行特定操作的函数，其使用的变量与 [build_rootfs.sh](../../scripts/build_rootfs.sh) 相同，通常包含以下两个变量： - nonfree_bin_dir - 该参数为储存 firmware 的文件夹，默认为 [${workdir}/../bin](../../scripts/rockchip/bin/)。 + 该参数为储存 firmware 的文件夹，默认为 [../../scripts/bin/](../../scripts/bin/)。 - rootfs_dir @@ -126,4 +126,4 @@ POST_BOARD_OVERLAY() { ## 运行测试 -通过运行脚本[一次构建](../瑞芯微等开发板.md#一次构建)，将 `--board` 参数设置为新增开发板的版型文件来运行测试。 +通过运行脚本 [构建完整镜像](../瑞芯微等开发板.md#构建完整镜像)，将 `--board` 参数设置为新增开发板的版型文件来运行测试。 diff --git a/documents/rockchip/openEuler镜像的构建.md b/documents/rockchip/openEuler镜像的构建.md index a4ca32c..0eb71f5 100644 --- a/documents/rockchip/openEuler镜像的构建.md +++ b/documents/rockchip/openEuler镜像的构建.md @@ -441,7 +441,7 @@ dnf --installroot=$WORKDIR/rootfs/ install -y alsa-utils wpa_supplicant vim net- ``` 3. 拷贝 wifi 配置文件，蓝牙启动文件 - 1. 下载 [无线配置目录](../../scripts/rockchip/bin/wireless) 到 $WORKDIR + 1. 下载 [无线配置目录](../../scripts/bin/wireless) 到 $WORKDIR 2. 拷贝文件 : ``` diff --git a/documents/rockchip/刷写EMMC镜像.md b/documents/rockchip/刷写EMMC镜像.md index 6df1ff8..0c75443 100644 --- a/documents/rockchip/刷写EMMC镜像.md +++ b/documents/rockchip/刷写EMMC镜像.md @@ -47,8 +47,8 @@ 1. 生成的刷写文件压缩包为 build 下或项目主页发布的的压缩后的 RAW 原始镜像（需要解压）：openEuler-VERSION-BOARD-RELEASE.img.xz。 2. 项目主页 scripts/bin 目录下提供的： - - 如果是 RK3399，使用 [rk3399_loader.bin](../../scripts/rockchip/bin/rk3399_loader.bin) - - 如果是 RK3588，使用 [rk3588_loader.bin](../../scripts/rockchip/bin/rk3588_loader.bin) + - 如果是 RK3399，使用 [rk3399_loader.bin](../../scripts/bin/rk3399_loader.bin) + - 如果是 RK3588，使用 [rk3588_loader.bin](../../scripts/bin/rk3588_loader.bin) 3. 下载版本不小于 2.92 的 [RKDevTool 工具](https://dl.radxa.com/tools/windows/windows_RKDevTool_Release_v2.92.zip)。 diff --git a/documents/rockchip/一次构建命令列举.md b/documents/rockchip/构建完整镜像命令列举.md similarity index 98% rename from documents/rockchip/一次构建命令列举.md rename to documents/rockchip/构建完整镜像命令列举.md index e1be251..8c57f18 100644 --- a/documents/rockchip/一次构建命令列举.md +++ b/documents/rockchip/构建完整镜像命令列举.md @@ -1,4 +1,4 @@ -# 一次构建命令列举 +# 构建完整镜像命令列举 - [描述](#描述) - [适用的 RK3399 开发板](#适用的-rk3399-开发板) @@ -10,7 +10,7 @@ ## 描述 -本文档介绍了支持的开发板以及对应的一次构建命令。 +本文档介绍了支持的开发板以及构建对应开发板完整镜像的命令。 ### 适用的 RK3399 开发板: diff --git a/documents/rockchip/顺序构建.md b/documents/rockchip/顺序构建.md index 5031b37..6cda461 100644 --- a/documents/rockchip/顺序构建.md +++ b/documents/rockchip/顺序构建.md @@ -23,7 +23,7 @@ 1. --board BOARD_CONFIG - 适用的开发板的版型配置文件在 [boards](../scripts/rockchip/boards) 文件夹中，示例文件 [sample.conf](../scripts/rockchip/boards/sample.conf)，默认为 `firefly-rk3399`。其包括的配置参数意义见[版型文件](./openEuler适配指南.md#编写版型文件)。 + 适用的开发板的版型配置文件在 [boards](../scripts/boards) 文件夹中，示例文件 [sample.conf](../scripts/boards/sample.conf)，默认为 `firefly-rk3399`。其包括的配置参数意义见[版型文件](./openEuler适配指南.md#编写版型文件)。 2. -h, --help @@ -42,7 +42,7 @@ 1. --board BOARD_CONFIG - 适用的开发板的版型配置文件在 [boards](../scripts/rockchip/boards) 文件夹中，示例文件 [sample.conf](../scripts/rockchip/boards/sample.conf)，默认为 `firefly-rk3399`。其包括的配置参数意义见[版型文件](./openEuler适配指南.md#编写版型文件)。 + 适用的开发板的版型配置文件在 [boards](../scripts/boards) 文件夹中，示例文件 [sample.conf](../scripts/boards/sample.conf)，默认为 `firefly-rk3399`。其包括的配置参数意义见[版型文件](./openEuler适配指南.md#编写版型文件)。 2. -k, --kernel KERNEL_URL @@ -78,15 +78,15 @@ 1. --board BOARD_CONFIG - 适用的开发板的版型配置文件在 [boards](../scripts/rockchip/boards) 文件夹中，示例文件 [sample.conf](../scripts/rockchip/boards/sample.conf)，默认为 `firefly-rk3399`。其包括的配置参数意义见[版型文件](./openEuler适配指南.md#编写版型文件)。 + 适用的开发板的版型配置文件在 [boards](../scripts/boards) 文件夹中，示例文件 [sample.conf](../scripts/boards/sample.conf)，默认为 `firefly-rk3399`。其包括的配置参数意义见[版型文件](./openEuler适配指南.md#编写版型文件)。 2. -r, --repo REPO_INFO - 开发源 repo 文件的 URL 或者路径，也可以是开发源中资源库的 baseurl 列表。注意，如果该参数为资源库的 baseurl 列表，该参数需要使用双引号，各个 baseurl 之间以空格隔开。 + 软件源 repo 文件的 URL 或者路径，也可以是软件源中资源库的 baseurl 列表。注意，如果该参数为资源库的 baseurl 列表，该参数需要使用双引号，各个 baseurl 之间以空格隔开。 下面分别举例： - - 开发源 repo 文件的 URL，如 `https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS-SP2/generic.repo`。 - - 开发源的 repo 文件路径： + - 软件源 repo 文件的 URL，如 `https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS-SP2/generic.repo`。 + - 软件源的 repo 文件路径： `./openEuler-20.03-LTS.repo`：生成 openEuler 20.03 LTS 版本的镜像，该文件内容参考 。 @@ -109,7 +109,7 @@ - `xfce`，带 Xfce 桌面以及中文字体、输入法等全部配套软件。 - `ukui`，带 UKUI 桌面及必要的配套软件（不包括中文字体以及输入法）。 - `dde`，带 DDE 桌面及必要的配套软件（不包括中文字体以及输入法）。 - - rpmlist 文件路径，其中包含镜像中要安装的软件列表，内容参考 [rpmlist](../../scripts/rockchip/configs/rpmlist)。 + - rpmlist 文件路径，其中包含镜像中要安装的软件列表，内容参考 [rpmlist](../../scripts/configs/rpmlist)。 默认使用 `headless` 选项。 @@ -132,7 +132,7 @@ 1. --board BOARD_CONFIG - 适用的开发板的版型配置文件在 [boards](../scripts/rockchip/boards) 文件夹中，示例文件 [sample.conf](../scripts/rockchip/boards/sample.conf)，默认为 `firefly-rk3399`。其包括的配置参数意义见[版型文件](./openEuler适配指南.md#编写版型文件)。 + 适用的开发板的版型配置文件在 [boards](../scripts/boards) 文件夹中，示例文件 [sample.conf](../scripts/boards/sample.conf)，默认为 `firefly-rk3399`。其包括的配置参数意义见[版型文件](./openEuler适配指南.md#编写版型文件)。 2. -n, --name IMAGE_NAME diff --git a/documents/树莓派.md b/documents/树莓派.md index ba55697..d501c77 100644 --- a/documents/树莓派.md +++ b/documents/树莓派.md @@ -11,8 +11,8 @@ - [镜像构建](#镜像构建) - [准备环境](#准备环境) - [构建镜像](#构建镜像) - - [快速构建（无需编译内核，推荐）](#快速构建无需编译内核推荐) - - [完全构建（包括编译内核）](#完全构建包括编译内核) + - [无需编译内核构建镜像](#无需编译内核构建镜像) + - [使用自定义内核构建镜像](#使用自定义内核构建镜像) - [Docker 容器内构建](#docker-容器内构建) @@ -38,10 +38,12 @@ - [openEuler 21.09 内测版（DDE 桌面、中文输入法）更新日志](raspberrypi/changelog/changelog-21.09-DDE.md) - [openEuler 21.09 内测版（Xfce 桌面、中文输入法）更新日志](raspberrypi/changelog/changelog-21.09-Xfce.md) - [openEuler 21.09 内测版（LXDE 桌面、中文输入法）更新日志](raspberrypi/changelog/changelog-21.09-LXDE.md) -- [scripts](../scripts/raspberrypi): 构建 openEuler 树莓派镜像的脚本 - - [快速构建（不编译内核）](../scripts/raspberrypi/build-image.sh) - - [完全构建（编译内核）](../scripts/raspberrypi/build-image-common.sh) - - [Docker 容器中构建](../scripts/raspberrypi/build-image-docker.sh) +- [scripts](../scripts): 构建 openEuler 树莓派镜像的脚本 + - [构建完整镜像](scripts/build.sh) + - [使用 Docker 构建完整镜像](./scripts/build-image-docker.sh) + - [构建 boot 镜像](scripts/build_boot.sh) + - [构建 rootfs 镜像](scripts/build_rootfs.sh) + - [将 u-boot、boot、rootfs 合并成一个完整镜像](scripts/gen_image.sh) ## 最新镜像 @@ -75,12 +77,97 @@ 详细过程参见 [openEuler 镜像的构建](raspberrypi/openEuler镜像的构建.md)。 -构建脚本见 [scripts/raspberrypi](../scripts/raspberrypi)。 +构建脚本见 [scripts](../scripts)。 + +构建镜像需执行命令： + +`sudo bash build.sh --board BOARD_CONFIG -n NAME -k KERNEL_URL -b KERNEL_BRANCH -c KERNEL_DEFCONFIG -r REPO_INFO -s SPEC --cores N` + +脚本运行结束后，会提示镜像的存储位置，镜像默认保存在脚本运行所在目录的 `build/YYYY-MM-DD/` 下。 + +各个参数意义： + +1. --board BOARD_CONFIG + + 适用的开发板的版型配置文件在 [boards](../scripts/boards) 文件夹中，示例文件 [sample.conf](../scripts/boards/sample.conf)。构建树莓派镜像需要设置为 `raspberrypi`，对应文件 [raspberrypi.conf](../scripts/boards/raspberrypi.conf)。 + + 其包括的配置参数意义如下： + + - platform=PLATFORM + + 开发板所使用的平台，目前支持的平台有：broadcom、rockchip、phytium。构建树莓派镜像需要设置为 `broadcom`。 + + - device-tree=DTB_NAME + + 内核设备树中的设备名称，和开发板名称有一点区别，对应 [kernel/arch/arm64/boot/dts/broadcom](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/arch/arm64/boot/dts/broadcom) 下的 `DTB_NAME.dts` 文件。构建树莓派镜像时，默认编译出所有树莓派平台的设备树文件，因此该参数可以为空或者根据需要设置为 `bcm2711-rpi-4-b` 或 `bcm2712-rpi-5-b`。 + + - ubootconfig=UBOOT_DEFCONFIG + + 开发板对应的 defconfig 的文件名称，对应 [u-boot/configs](https://github.com/u-boot/u-boot/tree/master/configs) 下 `UBOOT_DEFCONFIG` 文件，默认为 `firefly-rk3399_defconfig`。构建树莓派镜像无需这部分内容，默认为空：`ubootconfig=`。 + +2. -n, --name IMAGE_NAME + + 构建的镜像名称，例如：`openEuler-24.03-LTS-raspi-aarch64-alpha1`。 + +3. -k, --kernel KERNEL_URL + + 内核源码仓库的项目地址，如 `https://gitee.com/openeuler/raspberrypi-kernel.git`。可根据需要设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git` 或 `git@gitee.com:openeuler/kernel.git`。 + + 注意，如果本参数为空，则不会编译内核源码，默认使用软件源中的内核包。 + +4. -b, --branch KERNEL_BRANCH + + 内核源码的对应分支，例如：OLK-6.6。根据 -k 参数有以下选择： + + - -k https://gitee.com/openeuler/rockchip-kernel.git + - openEuler-20.03-LTS + - -k https://gitee.com/openeuler/kernel.git + - openEuler-21.09 + +5. -c, --config KERNEL_DEFCONFIG + + 内核编译使用的配置文件名称或路径，如 `bcm2711_defconfig`、`bcm2712_defconfig`。如果该参数为配置文件名称，请确保该文件在内核源码的目录 arch/arm64/configs 下。 + + 注意，如果 `--branch` 参数为 `OLK-6.6` 且本参数 `--config` 为空，则默认编译出同时支持树莓派 5 和树莓派 4B 的内核映像。 + +6. -r, --repo REPO_INFO + + 软件源 repo 文件的 URL 或者路径，也可以是软件源中资源库的 baseurl 列表。注意，如果该参数为资源库的 baseurl 列表，该参数需要使用双引号，各个 baseurl 之间以空格隔开。 + + 下面分别举例： + - 软件源 repo 文件的 URL，如 `https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS-SP1/generic.repo` + - 软件源的 repo 文件路径： + - `./openEuler-20.03-LTS-SP1.repo`：生成 openEuler 20.03 LTS SP1 版本的镜像，该文件内容参考 。 + - 资源库的 baseurl 列表，如 `"http://repo.openeuler.org/openEuler-20.03-LTS-SP1/OS/aarch64/ http://repo.openeuler.org/openEuler-20.03-LTS-SP1/EPOL/aarch64/"`。 + +7. -s, --spec SPEC + + 构建的镜像版本： + - `headless`，无图形界面版的镜像。 + - `xfce`，带 Xfce 桌面以及中文字体、输入法等全部配套软件。 + - `ukui`，带 UKUI 桌面以及中文字体、输入法等全部配套软件。 + - `dde`，带 DDE 桌面以及中文字体、输入法等全部配套软件。 + - `gnome`，带 GNOME 桌面以及中文字体、输入法等全部配套软件。 + - `devstation`，带 GNOME 桌面、中文字体、输入法、大量开发工具和 IDE 等配套软件。 + - rpmlist 文件路径，该文件包含镜像中要安装的软件列表，内容参考 [rpmlist](../scripts/configs-rpi/rpmlist)。 + + 默认使用 `headless` 选项。 + +8. --cores N + + 并行编译的数量，根据运行脚本的宿主机 CPU 实际数目设定，默认为可用的 CPU 总数。 + +9. -h, --help + + 显示帮助信息。 + + +#### 无需编译内核构建镜像 +例如，使用软件源中的内核包构建 openEuler 24.03 LTS SP2 版本 openEuler 树莓派镜像，执行命令：`sudo bash build.sh --board raspberrypi --kernel "" --branch "" --config "" --repo https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-24.03-LTS-SP2/generic.repo --name openEuler-24.03-LTS-raspi-aarch64-alpha1` -#### 快速构建（无需编译内核，推荐） >![](public_sys-resources/icon-notice.gif) **须知：** ->当前支持多个 openEuler 版本，即 20.09、20.03 LTS SP1、21.03、20.03 LTS SP2、21.09、20.03 LTS SP3、22.03 LTS、22.09、22.03 LTS SP1、23.03、22.03 LTS SP2、22.03 LTS SP3、24.03 LTS、22.03 LTS SP4、24.09、24.03 LTS SP1、25.03、24.03 LTS SP2 版本。 +>无需编译内核，使用软件源中的内核包，当前支持版本有 20.09、20.03 LTS SP1、21.03、20.03 LTS SP2、21.09、20.03 LTS SP3、22.03 LTS、22.09、22.03 LTS SP1、23.03、22.03 LTS SP2、22.03 LTS SP3、24.03 LTS、22.03 LTS SP4、24.09、24.03 LTS SP1、25.03、24.03 LTS SP2。 >如果构建包含 Xfce/UKUI/DDE/GNOME 桌面环境或者 DevStation 开发者工作站的镜像，需要注意五点： >1. 构建包含 Xfce 桌面环境的镜像，当前只支持 openEuler 21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1/23.03/22.03 LTS SP2/22.03 LTS SP3/24.03 LTS/22.03 LTS SP4/24.09 版本。自 openEuler 24.03 LTS SP1 起，不再支持 Xfce 桌面环境。 >2. 构建包含 DDE 桌面环境的镜像，当前只支持 openEuler 20.03 LTS SP1/21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1/23.03/22.03 LTS SP2/22.03 LTS SP3/24.03 LTS/22.03 LTS SP4/24.09/24.03 LTS SP1/25.03/24.03 LTS SP2 版本。 @@ -88,168 +175,68 @@ >4. 构建 DevStation 开发者工作站的镜像，当前只支持 openEuler 24.03 LTS SP1/25.03/24.03 LTS SP2 版本。 >5. 根据需要设置 -s/--spec，其具体意义见该参数的介绍部分。 -使用已有的树莓派内核、固件、蓝牙等 RPM 包构建镜像。 -构建镜像需执行命令： - -`sudo bash build-image.sh -d DIR -r REPO -n IMAGE_NAME -s SPEC` - -各个参数意义： - -1. -d, --dir DIR - - 构建镜像和临时文件的输出目录，默认为脚本所在目录。如果 `DIR` 不存在则会自动创建。 - - 脚本运行结束后，会提示镜像的存储位置，默认保存在 `DIR/raspi_output/img/` 下。 - -2. -r, --repo REPO_INFO - - 开发源 repo 文件的 URL 或者路径，也可以是开发源中资源库的 baseurl 列表。注意，如果该参数为资源库的 baseurl 列表，该参数需要使用双引号，各个 baseurl 之间以空格隔开。 - - 下面分别举例： - - 开发源 repo 文件的 URL，如 `https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-21.03/generic.repo`。 - - 开发源的 repo 文件路径： - - `./openEuler-21.03.repo`：生成 openEuler 21.03 版本的镜像，该文件内容参考 。 - - 资源库的 baseurl 列表，如 `"http://repo.openeuler.org/openEuler-21.03/OS/aarch64/ http://repo.openeuler.org/openEuler-21.03/EPOL/aarch64/"`。 - -3. -n, --name IMAGE_NAME - - 构建的镜像名称。 - - 例如，`openEuler-21.03.img`。默认为`openEuler-raspi-aarch64.img`，或者根据 `-n, --name IMAGE_NAME` 参数自动生成。 - -4. -s, --spec SPEC - - 构建的镜像版本： - - `headless`，无图形界面版的镜像。 - - `xfce`，带 Xfce 桌面以及中文字体、输入法等全部配套软件。 - - `ukui`，带 UKUI 桌面以及中文字体、输入法等全部配套软件。 - - `dde`，带 DDE 桌面以及中文字体、输入法等全部配套软件。 - - `gnome`，带 GNOME 桌面以及中文字体、输入法等全部配套软件。 - - `devstation`，带 GNOME 桌面、中文字体、输入法、大量开发工具和 IDE 等配套软件。 - - rpmlist 文件路径，其中包含镜像中要安装的软件列表，内容参考 [rpmlist](../scripts/raspberrypi/config/rpmlist)。 - - 默认使用 `headless` 选项。 - -5. -h, --help - - 显示帮助信息。 - -#### 完全构建（包括编译内核） - -包含编译内核、下载树莓派相关固件等过程，速度相对较慢。 +#### 使用自定义内核构建镜像 +例如，使用软件源中的内核包构建 openEuler 24.03 LTS SP2 版本 openEuler 树莓派镜像，执行命令：`sudo bash build.sh --board raspberrypi --kernel "https://gitee.com/openeuler/raspberrypi-kernel.git" --branch "OLK-6.6" --config "" --repo https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-24.03-LTS-SP2/generic.repo --name openEuler-24.03-LTS-raspi-aarch64-alpha1` >![](public_sys-resources/icon-notice.gif) **须知：** ->当前支持三个 openEuler 版本，即 20.03 LTS、20.09、20.03 LTS SP1、21.03、20.03 LTS SP2、21.09、20.03 LTS SP3、22.03 LTS、22.09、22.03 LTS SP1、23.03、22.03 LTS SP2、22.03 LTS SP3、24.03 LTS、22.03 LTS SP4、24.09、24.03 LTS SP1、25.03、24.03 LTS SP2 版本。 +>使用自定义内核，当前支持版本有 20.03 LTS、20.09、20.03 LTS SP1、21.03、20.03 LTS SP2、21.09、20.03 LTS SP3、22.03 LTS、22.09、22.03 LTS SP1、23.03、22.03 LTS SP2、22.03 LTS SP3、24.03 LTS、22.03 LTS SP4、24.09、24.03 LTS SP1、25.03、24.03 LTS SP2。 >如果构建包含 Xfce/UKUI/DDE 桌面环境或者 DevStation 开发者工作站的镜像，需要注意六点： >1. 构建包含 Xfce 桌面环境的镜像，当前只支持 openEuler 21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1/23.03/22.03 LTS SP2/22.03 LTS SP3/24.03 LTS/22.03 LTS SP4/24.09 版本，需要选择对应内核源码和分支。自 openEuler 24.03 LTS SP1 起，不再支持 Xfce 桌面环境。 -> - openEuler 21.03：需要选择 [openEuler 内核](https://gitee.com/openeuler/kernel) 的 [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/kernel.git`，-b/--branch` 设置为 `openEuler-21.03`。 -> - openEuler 20.03 LTS SP2/20.03 LTS SP3：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.03-LTS`。 -> - openEuler 21.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-21.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-21.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-21.09`。 -> - openEuler 22.03 LTS：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS`。 -> - openEuler 22.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.09`。 -> - openEuler 22.03 LTS SP1：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP1`。 -> - openEuler 23.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-23.03`。 -> - openEuler 22.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP2](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP2/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP2`。 -> - openEuler 22.03 LTS SP3/22.03 LTS SP4：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-5.10](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-5.10/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-5.10`。 -> - openEuler 24.03 LTS/24.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-6.6](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-6.6`。 +> - openEuler 21.03：需要选择 [openEuler 内核](https://gitee.com/openeuler/kernel) 的 [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/kernel.git`，`-b/--branch` 设置为 `openEuler-21.03`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 20.03 LTS SP2/20.03 LTS SP3：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.03-LTS`，`-c/--config` 设置为 `openeuler-raspi_defconfig`。 +> - openEuler 21.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-21.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-21.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-21.09`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.09`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS SP1：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP1`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 23.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-23.03`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP2](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP2/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP2`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS SP3/22.03 LTS SP4：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-5.10](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-5.10/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-5.10`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 24.03 LTS/24.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-6.6](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-6.6`，`-c/--config` 设置为空 `""`。 >2. 构建包含 UKUI 桌面环境的镜像，当前只支持 openEuler 20.09/20.03 LTS SP1/21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1/23.03/22.03 LTS SP2/22.03 LTS SP3/24.03 LTS/22.03 LTS SP4/24.09/24.03 LTS SP1/25.03/24.03 LTS SP2 版本，需要选择对应内核源码和分支。 -> - openEuler 20.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.09`。 -> - openEuler 20.03 LTS SP1/20.03 LTS SP2/20.03 LTS SP3：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.03-LTS`。 -> - openEuler 21.03：需要选择 [openEuler 内核](https://gitee.com/openeuler/kernel) 的 [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/kernel.git`，-b/--branch` 设置为 `openEuler-21.03`。 -> - openEuler 21.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-21.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-21.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-21.09`。 -> - openEuler 22.03 LTS：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS`。 -> - openEuler 22.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.09`。 -> - openEuler 22.03 LTS SP1：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP1`。 -> - openEuler 23.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-23.03`。 -> - openEuler 22.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP2](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP2/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP2`。 -> - openEuler 22.03 LTS SP3/22.03 LTS SP4：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-5.10](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-5.10/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-5.10`。 -> - openEuler 24.03 LTS/24.09/24.03 LTS SP1/24.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-6.6](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-6.6`。 -> - openEuler 25.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-25.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-25.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-25.03`。 +> - openEuler 20.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.09`，`-c/--config` 设置为 `openeuler-raspi_defconfig`。 +> - openEuler 20.03 LTS SP1/20.03 LTS SP2/20.03 LTS SP3：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.03-LTS`，`-c/--config` 设置为 `openeuler-raspi_defconfig`。 +> - openEuler 21.03：需要选择 [openEuler 内核](https://gitee.com/openeuler/kernel) 的 [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/kernel.git`，-b/--branch` 设置为 `openEuler-21.03`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 21.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-21.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-21.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-21.09`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.09`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS SP1：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP1`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 23.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-23.03`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP2](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP2/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP2`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS SP3/22.03 LTS SP4：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-5.10](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-5.10/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-5.10`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 24.03 LTS/24.09/24.03 LTS SP1/24.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-6.6](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-6.6`，`-c/--config` 设置为空 `""`。 +> - openEuler 25.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-25.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-25.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-25.03`，`-c/--config` 设置为空 `""`。 >3. 构建包含 DDE 桌面环境的镜像，当前只支持 openEuler 20.03 LTS SP1/21.03/20.03 LTS SP2/21.09/20.03 LTS SP3/22.03 LTS/22.09/22.03 LTS SP1/23.03/22.03 LTS SP2/22.03 LTS SP3/24.03 LTS/22.03 LTS SP4/24.09/24.03 LTS SP1/25.03/24.03 LTS SP2 版本。 -> - openEuler 20.03 LTS SP1/20.03 LTS SP2/20.03 LTS SP3：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.03-LTS`。 -> - openEuler 21.03：需要选择 [openEuler 内核](https://gitee.com/openeuler/kernel) 的 [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/kernel.git`，-b/--branch` 设置为 `openEuler-21.03`。 -> - openEuler 21.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-21.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-21.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-21.09`。 -> - openEuler 22.03 LTS：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS`。 -> - openEuler 22.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.09`。 -> - openEuler 22.03 LTS SP1：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP1`。 -> - openEuler 23.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-23.03`。 -> - openEuler 22.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP2](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP2/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP2`。 -> - openEuler 22.03 LTS SP3/22.03 LTS SP4：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-5.10](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-5.10/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-5.10`。 -> - openEuler 24.03 LTS/24.09/24.03 LTS SP1/24.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-6.6](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-6.6`。 -> - openEuler 25.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-25.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-25.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-25.03`。 +> - openEuler 20.03 LTS SP1/20.03 LTS SP2/20.03 LTS SP3：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-20.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-20.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-20.03-LTS`，`-c/--config` 设置为 `openeuler-raspi_defconfig`。 +> - openEuler 21.03：需要选择 [openEuler 内核](https://gitee.com/openeuler/kernel) 的 [openEuler-21.03](https://gitee.com/openeuler/kernel/tree/openEuler-21.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/kernel.git`，-b/--branch` 设置为 `openEuler-21.03`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 21.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-21.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-21.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-21.09`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.09：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.09](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.09/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.09`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS SP1：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP1](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP1/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP1`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 23.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-23.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-23.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-23.03`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-22.03-LTS-SP2](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-22.03-LTS-SP2/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-22.03-LTS-SP2`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 22.03 LTS SP3/22.03 LTS SP4：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-5.10](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-5.10/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-5.10`，`-c/--config` 设置为 `bcm2711_defconfig`。 +> - openEuler 24.03 LTS/24.09/24.03 LTS SP1/24.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-6.6](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-6.6`，`-c/--config` 设置为空 `""`。 +> - openEuler 25.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-25.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-25.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-25.03`，`-c/--config` 设置为空 `""`。 >4. 构建包含 GNOME 桌面环境的镜像，当前只支持 openEuler 24.03 LTS/22.03 LTS SP4/24.09/24.03 LTS SP1/25.03/24.03 LTS SP2 版本。 -> - openEuler 24.03 LTS/24.09/24.03 LTS SP1/24.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-6.6](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-6.6`。 -> - openEuler 25.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-25.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-25.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-25.03`。 +> - openEuler 24.03 LTS/24.09/24.03 LTS SP1/24.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-6.6](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-6.6`，`-c/--config` 设置为空 `""`。 +> - openEuler 25.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-25.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-25.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-25.03`，`-c/--config` 设置为空 `""`。 >5. 构建 DevStation 开发者工作站的镜像，当前只支持 openEuler 24.03 LTS SP1/25.03/24.03 LTS SP2 版本。 -> - openEuler 24.03 LTS SP1/24.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-6.6](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-6.6`。 -> - openEuler 25.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-25.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-25.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-25.03`。 +> - openEuler 24.03 LTS SP1/24.03 LTS SP2：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [OLK-6.6](https://gitee.com/openeuler/raspberrypi-kernel/tree/OLK-6.6/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `OLK-6.6`，`-c/--config` 设置为空 `""`。 +> - openEuler 25.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-25.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-25.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-25.03`，`-c/--config` 设置为空 `""`。 >6. 根据需要设置 -s/--spec，其具体意义见该参数的介绍部分。 -构建镜像需执行命令： - -`sudo bash build-image-common.sh -n IMAGE_NAME -k KERNEL_URL -b KERNEL_BRANCH -c KERNEL_DEFCONFIG -r REPO -s SPEC --cores N` - -脚本运行结束后，会提示镜像的存储位置，镜像默认保存在脚本运行所在目录的 `raspi_output/img/` 下。 - -各个参数意义： - -1. -n, --name IMAGE_NAME - - 构建的镜像名称。 - - 例如，`openEuler-20.03-LTS-SP1.img`。默认为`openEuler-raspi-aarch64.img`，或者根据 `-n, --name IMAGE_NAME` 参数自动生成。 - -2. -k, --kernel KERNEL_URL - - 内核源码仓库的项目地址，默认为 `https://gitee.com/openeuler/raspberrypi-kernel.git`。可根据需要设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git` 或 `git@gitee.com:openeuler/kernel.git`。 - -3. -b, --branch KERNEL_BRANCH - - 内核源码的对应分支，默认为 `openEuler-20.03-LTS`，推荐使用分支 `openEuler-21.09`、`openEuler-20.03-LTS` 或 `openEuler-20.09`。 - -4. -c, --config KERNEL_DEFCONFIG - - 内核编译使用的配置文件名称或路径，默认为 `openeuler-raspi_defconfig`。如果该参数为配置文件名称，请确保该文件在内核源码的目录 arch/arm64/configs 下。 - -5. -r, --repo REPO_INFO - - 开发源 repo 文件的 URL 或者路径，也可以是开发源中资源库的 baseurl 列表。注意，如果该参数为资源库的 baseurl 列表，该参数需要使用双引号，各个 baseurl 之间以空格隔开。 - - 下面分别举例： - - 开发源 repo 文件的 URL，如 `https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS-SP1/generic.repo` - - 开发源的 repo 文件路径： - - `./openEuler-20.03-LTS-SP1.repo`：生成 openEuler 20.03 LTS SP1 版本的镜像，该文件内容参考 。 - - 资源库的 baseurl 列表，如 `"http://repo.openeuler.org/openEuler-20.03-LTS-SP1/OS/aarch64/ http://repo.openeuler.org/openEuler-20.03-LTS-SP1/EPOL/aarch64/"`。 - -6. -s, --spec SPEC - - 构建的镜像版本： - - `headless`，无图形界面版的镜像。 - - `xfce`，带 Xfce 桌面以及中文字体、输入法等全部配套软件。 - - `ukui`，带 UKUI 桌面以及中文字体、输入法等全部配套软件。 - - `dde`，带 DDE 桌面以及中文字体、输入法等全部配套软件。 - - `gnome`，带 GNOME 桌面以及中文字体、输入法等全部配套软件。 - - `devstation`，带 GNOME 桌面、中文字体、输入法、大量开发工具和 IDE 等配套软件。 - - rpmlist 文件路径，该文件包含镜像中要安装的软件列表，内容参考 [rpmlist](../scripts/raspberrypi/config-common/rpmlist)。 - - 默认使用 `headless` 选项。 - -7. --cores N - - 并行编译的数量，根据运行脚本的宿主机 CPU 实际数目设定，默认为可用的 CPU 总数。 - #### Docker 容器内构建 构建镜像需执行命令： -`sudo bash build-image-docker.sh -d DOCKER_FILE -n IMAGE_NAME -k KERNEL_URL -b KERNEL_BRANCH -c KERNEL_DEFCONFIG -r REPO --cores N` +`sudo bash build-image-docker.sh -d DOCKER_FILE --board BOARD_CONFIG -n NAME -k KERNEL_URL -b KERNEL_BRANCH -c KERNEL_DEFCONFIG -r REPO_INFO -s SPEC --cores N` -脚本运行结束后，镜像默认保存在脚本运行所在目录的 `raspi_output/img/` 下。 +脚本运行结束后，会提示镜像的存储位置，镜像默认保存在脚本运行所在目录的 `build/YYYY-MM-DD/` 下。 注意！！！运行该脚本前，需安装 Docker 运行环境。该脚本会自动将 `-d DOCKER_FILE` 参数对应的 Docker 镜像导入本机系统中。 -除参数 `-d DOCKER_FILE` 外，剩余参数与 [快速构建（无需编译内核，推荐）](#快速构建无需编译内核推荐) 或 [完全构建（包括编译内核）](#完全构建包括编译内核) 中对应参数一致： +除参数 `-d DOCKER_FILE` 外，其余参数与 [构建镜像章节](#构建镜像) 中 [build.sh](../scripts/build.sh) 对应参数一致： 1. -d, --docker DOCKER_FILE diff --git a/documents/瑞芯微等开发板.md b/documents/瑞芯微等开发板.md index 9ce232f..967f4a5 100644 --- a/documents/瑞芯微等开发板.md +++ b/documents/瑞芯微等开发板.md @@ -9,8 +9,10 @@ - [最新镜像](#最新镜像) - [镜像构建](#镜像构建) - [准备环境](#准备环境) - - [一次构建](#一次构建) + - [构建完整镜像](#构建完整镜像) - [Docker 容器内构建](#docker-容器内构建) + - [使用脚本构建镜像需执行命令：](#使用脚本构建镜像需执行命令) + - [使用 Docker 分步构建](#使用-docker-分步构建) - [顺序构建](#顺序构建) - [刷写镜像](#刷写镜像) - [刷写到 SD 卡](#刷写到-sd-卡) @@ -25,7 +27,7 @@ - [openEuler镜像的构建](rockchip/openEuler镜像的构建.md) - [刷写EMMC镜像](rockchip/刷写EMMC镜像.md) - [顺序构建](rockchip/顺序构建.md) - - [一次构建命令列举](rockchip/一次构建命令列举.md) + - [构建完整镜像命令列举](rockchip/构建完整镜像命令列举.md) - [基于Firefly-SDK编译Firefly-RK3399的内核镜像](rockchip/基于Firefly-SDK编译Firefly-RK3399的内核镜像.md) - [打包 ITX-RK3588J 一体化烧写镜像](rockchip/打包ITX-RK3588J一体化烧写镜像.md) - [设置 SELinux](rockchip/设置SELinux.md) @@ -33,12 +35,12 @@ - [openEuler 适配指南](rockchip/openEuler适配指南.md) - [在openEuler上使用RKNPU](rockchip/在openEuler上使用RKNPU.md) - [在openEuler上运行RKLLM](rockchip/在openEuler上运行RKLLM.md) -- [scripts](../scripts/rockchip): 构建 openEuler RK3399 等开发板镜像的脚本 - - [一次构建脚本](../scripts/rockchip/build.sh) - - [boot 镜像构建脚本](../scripts/rockchip/build_boot.sh) - - [rootfs 镜像构建脚本](../scripts/rockchip/build_rootfs.sh) - - [u-boot 编译脚本](../scripts/rockchip/build_u-boot.sh) - - [可启动镜像生成脚本](../scripts/rockchip/gen_image.sh) +- [scripts](../scripts): 构建 openEuler 树莓派、RK3399 等开发板镜像的脚本 + - [构建完整镜像](scripts/build.sh) + - [使用 Docker 构建完整镜像](./scripts/build-image-docker.sh) + - [构建 boot 镜像](scripts/build_boot.sh) + - [构建 rootfs 镜像](scripts/build_rootfs.sh) + - [将 u-boot、boot、rootfs 合并成一个完整镜像](scripts/gen_image.sh) ## 最新镜像 @@ -65,9 +67,9 @@ 详细过程参见 [openEuler 镜像的构建](rockchip/openEuler镜像的构建.md)。 -构建脚本见 [scripts/rockchip](../scripts/rockchip)。 +构建脚本见 [scripts](../scripts)。 -### 一次构建 +### 构建完整镜像 构建镜像需执行命令： @@ -91,13 +93,13 @@ 1. --board BOARD_CONFIG - 适用的开发板的版型配置文件在 [boards](../scripts/rockchip/boards) 文件夹中，示例文件 [sample.conf](../scripts/rockchip/boards/sample.conf)，默认为 `firefly-rk3399`。 + 适用的开发板的版型配置文件在 [boards](../scripts/boards) 文件夹中，示例文件 [sample.conf](../scripts/boards/sample.conf)，默认为 `firefly-rk3399`。 其包括的配置参数意义如下： - platform=PLATFORM - 开发板所使用的平台，目前支持的平台有：rockchip、phytium，默认为 `rockchip`。 + 开发板所使用的平台，目前支持的平台有：broadcom、rockchip、phytium，默认为 `rockchip`。 - device-tree=DTB_NAME @@ -105,7 +107,7 @@ - ubootconfig=UBOOT_DEFCONFIG - 开发板对应的 defconfig 的文件名称，对应 [u-boot/configs](https://github.com/u-boot/u-boot/tree/master/configs) 下 `UBOOT_DEFCONFIG` 文件，默认为 `firefly-rk3399_defconfig`；如需在 RK3588 开发板上使用预编译的 u-boot，可以将此项设置为 `none`。 + 开发板对应的 defconfig 的文件名称，对应 [u-boot/configs](https://github.com/u-boot/u-boot/tree/master/configs) 下 `UBOOT_DEFCONFIG` 文件，默认为 `firefly-rk3399_defconfig`；如需在 RK3588 开发板上使用预编译的 u-boot，可以将此项设置为空：`ubootconfig=`。 2. -n, --name IMAGE_NAME @@ -130,11 +132,11 @@ 6. -r, --repo REPO_INFO - 开发源 repo 文件的 URL 或者路径，也可以是开发源中资源库的 baseurl 列表。注意，如果该参数为资源库的 baseurl 列表，该参数需要使用双引号，各个 baseurl 之间以空格隔开。 + 软件源 repo 文件的 URL 或者路径，也可以是软件源中资源库的 baseurl 列表。注意，如果该参数为资源库的 baseurl 列表，该参数需要使用双引号，各个 baseurl 之间以空格隔开。 下面分别举例： - - 开发源 repo 文件的 URL，如 `https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo`。 - - 开发源的 repo 文件路径： + - 软件源 repo 文件的 URL，如 `https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo`。 + - 软件源的 repo 文件路径： `./openEuler-20.03-LTS.repo`：生成 openEuler 20.03 LTS 版本的镜像，该文件内容参考 。 @@ -147,7 +149,7 @@ - `xfce`，带 Xfce 桌面以及中文字体、输入法等全部配套软件。 - `ukui`，带 UKUI 桌面及必要的配套软件（不包括中文字体以及输入法）。 - `dde`，带 DDE 桌面及必要的配套软件（不包括中文字体以及输入法）。 - - rpmlist 文件路径，其中包含镜像中要安装的软件列表，内容参考 [rpmlist](../scripts/rockchip/configs/rpmlist)。 + - rpmlist 文件路径，其中包含镜像中要安装的软件列表，内容参考 [rpmlist](../scripts/configs/rpmlist)。 默认使用 `headless` 选项。 @@ -173,84 +175,84 @@ Firefly Wiki

Rockchip RK3399

openEuler 20.03 LTS, openEuler 22.03 LTS SP2, openEuler 22.03 LTS SP3, openEuler 24.03 LTS

-一次构建命令 +构建完整镜像命令
  • Radxa Rock Pi 4A
Radxa Wiki

Rockchip RK3399

openEuler 20.03 LTS, openEuler 22.03 LTS

-一次构建命令 +构建完整镜像命令
  • Firefly ROC-RK3566-PC
Firefly Wiki

Rockchip RK3566

openEuler 22.03 LTS SP2, openEuler 22.03 LTS SP3, openEuler 24.03 LTS

-一次构建命令 +构建完整镜像命令
  • Firefly ROC-RK3568-PC-SE
Firefly Wiki

Rockchip RK3568

openEuler 22.03 LTS SP2, openEuler 22.03 LTS SP3

-一次构建命令 +构建完整镜像命令
  • Firefly ROC-RK3568-PC
Firefly Wiki

Rockchip RK3568

openEuler 22.03 LTS SP2, openEuler 22.03 LTS SP3

-一次构建命令 +构建完整镜像命令
  • BananaPi Armsom-Sige5
Armsom Wiki

Rockchip RK3576

openEuler 22.03 LTS SP3

-一次构建命令 +构建完整镜像命令
  • Firefly ITX-3588J
Firefly Wiki

Rockchip RK3588

openEuler 22.03 LTS SP3

-一次构建命令 +构建完整镜像命令
  • Firefly ROC-RK3588S-PC
Firefly Wiki

Rockchip RK3588

openEuler 22.03 LTS SP2, openEuler 22.03 LTS SP3

-一次构建命令 +构建完整镜像命令
  • Radxa Rock-5B
Radxa Wiki

Rockchip RK3588

openEuler 22.03 LTS SP2, openEuler 22.03 LTS SP3

-一次构建命令 +构建完整镜像命令
  • Phytium Pi 4GB
Phytium Website

Phytium

openEuler 22.03 LTS SP3, openEuler 24.03 LTS

-一次构建命令 +构建完整镜像命令
  • Orange Pi Zero 2
OrangePi Wiki

Allwinner H616

openEuler 20.03 LTS, openEuler 24.03 LTS

-一次构建命令 +构建完整镜像命令
  • Longan Pi 3H
Sipeed Wiki

Allwinner H618

openEuler 24.03 LTS

-一次构建命令 +构建完整镜像命令 @@ -265,7 +267,7 @@ 注意！！！运行该脚本前，需安装 Docker 运行环境。该脚本会自动将 DOCKER_FILE 参数对应的 Docker 镜像导入本机系统中。 -除参数 DOCKER_FILE 外，剩余参数与[一次构建](#一次构建)中对应参数一致： +除参数 DOCKER_FILE 外，剩余参数与[构建完整镜像](#构建完整镜像)中对应参数一致： 1. -d, --docker DOCKER_FILE diff --git a/scripts/boards/armsom-sige5.conf b/scripts/boards/armsom-sige5.conf index 722f091..bc1f646 100644 --- a/scripts/boards/armsom-sige5.conf +++ b/scripts/boards/armsom-sige5.conf @@ -1,4 +1,4 @@ -ubootconfig=none +ubootconfig= local_uboot_dir=${nonfree_bin_dir}/u-boot/armsom-sige5 dtb_name=rk3576-armsom-sige5 platform=rockchip diff --git a/scripts/boards/firefly-itx-3588j.conf b/scripts/boards/firefly-itx-3588j.conf index 9c8c0ac..809bbae 100644 --- a/scripts/boards/firefly-itx-3588j.conf +++ b/scripts/boards/firefly-itx-3588j.conf @@ -1,4 +1,4 @@ -ubootconfig=none +ubootconfig= local_uboot_dir=${nonfree_bin_dir}/u-boot/firefly-rk3588 dtb_name=rk3588-firefly-itx-3588j platform=rockchip diff --git a/scripts/boards/firefly-roc-rk3566-pc.conf b/scripts/boards/firefly-roc-rk3566-pc.conf index 7570c5e..1ead54d 100644 --- a/scripts/boards/firefly-roc-rk3566-pc.conf +++ b/scripts/boards/firefly-roc-rk3566-pc.conf @@ -1,4 +1,4 @@ -ubootconfig=none +ubootconfig= local_uboot_dir=${nonfree_bin_dir}/u-boot/firefly-rk3566 dtb_name=rk3566-roc-pc platform=rockchip diff --git a/scripts/boards/firefly-roc-rk3568-pc-se.conf b/scripts/boards/firefly-roc-rk3568-pc-se.conf index 3e23914..fcc2151 100644 --- a/scripts/boards/firefly-roc-rk3568-pc-se.conf +++ b/scripts/boards/firefly-roc-rk3568-pc-se.conf @@ -1,4 +1,4 @@ -ubootconfig=none +ubootconfig= local_uboot_dir=${nonfree_bin_dir}/u-boot/firefly-rk3568 dtb_name=rk3568-roc-pc-se platform=rockchip diff --git a/scripts/boards/firefly-roc-rk3568-pc.conf b/scripts/boards/firefly-roc-rk3568-pc.conf index a5f4284..c043327 100644 --- a/scripts/boards/firefly-roc-rk3568-pc.conf +++ b/scripts/boards/firefly-roc-rk3568-pc.conf @@ -1,4 +1,4 @@ -ubootconfig=none +ubootconfig= local_uboot_dir=${nonfree_bin_dir}/u-boot/firefly-rk3568 dtb_name=rk3568-roc-pc platform=rockchip diff --git a/scripts/boards/firefly-roc-rk3588s-pc.conf b/scripts/boards/firefly-roc-rk3588s-pc.conf index 38d6e3f..3dc6d3b 100644 --- a/scripts/boards/firefly-roc-rk3588s-pc.conf +++ b/scripts/boards/firefly-roc-rk3588s-pc.conf @@ -1,4 +1,4 @@ -ubootconfig=none +ubootconfig= local_uboot_dir=${nonfree_bin_dir}/u-boot/firefly-rk3588 dtb_name=rk3588s-roc-pc platform=rockchip diff --git a/scripts/boards/longanpi-3h.conf b/scripts/boards/longanpi-3h.conf index ad46afb..e3765f8 100644 --- a/scripts/boards/longanpi-3h.conf +++ b/scripts/boards/longanpi-3h.conf @@ -1,4 +1,4 @@ -ubootconfig=none +ubootconfig= local_uboot_dir=${nonfree_bin_dir}/u-boot/longanpi-3h dtb_name=sun50i-h618-longanpi-3h platform=allwinner diff --git a/scripts/boards/orangepi-zero2.conf b/scripts/boards/orangepi-zero2.conf index 3c29976..5f0bbc9 100644 --- a/scripts/boards/orangepi-zero2.conf +++ b/scripts/boards/orangepi-zero2.conf @@ -1,4 +1,4 @@ -ubootconfig=none +ubootconfig= local_uboot_dir=${nonfree_bin_dir}/u-boot/orangepi-zero2 dtb_name=sun50i-h616-orangepi-zero2 platform=allwinner diff --git a/scripts/boards/phytiumpi-4gb.conf b/scripts/boards/phytiumpi-4gb.conf index 418f8a4..312fdb7 100644 --- a/scripts/boards/phytiumpi-4gb.conf +++ b/scripts/boards/phytiumpi-4gb.conf @@ -1,4 +1,4 @@ -ubootconfig=none +ubootconfig= local_uboot_dir=${nonfree_bin_dir}/u-boot/phytiumpi dtb_name=phytiumpi_firefly platform=phytium diff --git a/scripts/boards/radxa-rock-5b.conf b/scripts/boards/radxa-rock-5b.conf index 712931b..54bbe8a 100644 --- a/scripts/boards/radxa-rock-5b.conf +++ b/scripts/boards/radxa-rock-5b.conf @@ -1,4 +1,4 @@ -ubootconfig=none +ubootconfig= local_uboot_dir=${nonfree_bin_dir}/u-boot/radxa-rock5b dtb_name=rk3588-rock-5b platform=rockchip diff --git a/scripts/boards/raspberrypi.conf b/scripts/boards/raspberrypi.conf new file mode 100644 index 0000000..6c5b2b3 --- /dev/null +++ b/scripts/boards/raspberrypi.conf @@ -0,0 +1,11 @@ +ubootconfig= +dtb_name=bcm2711-rpi-4-b +platform=broadcom +soc_name= +arch=arm64 +part_table=msdos + +POST_BOARD_OVERLAY() { + echo "Put ${board} firmware into rootfs..." + echo "Nothing to do..." +} diff --git a/scripts/build-image-docker.sh b/scripts/build-image-docker.sh index d91dc3b..d043c90 100755 --- a/scripts/build-image-docker.sh +++ b/scripts/build-image-docker.sh @@ -1,10 +1,10 @@ #!/bin/bash - set -e +set -x __usage=" Usage: build-image-docker [OPTIONS] -Build board image. +Build openEuler image. Options: --board BOARD_CONFIG Required! The config of target board in the boards folder. @@ -14,7 +14,7 @@ Options: -b, --branch KERNEL_BRANCH The branch name of kernel source's repository, which defaults to openEuler-22.03-LTS-SP3. -c, --config KERNEL_DEFCONFIG The name/path of defconfig file when compiling kernel, which defaults to openeuler_rockchip_defconfig. -r, --repo REPO_INFO Required! The URL/path of target repo file or list of repo's baseurls which should be a space separated list. - -s, --spec SPEC The image's specification: headless, xfce, ukui, dde or the file path of rpmlist. The default is headless. + -s, --spec SPEC The image's specification: headless, xfce, ukui, dde, gnome, devstation or the file path of rpmlist. The default is headless. --cores N The number of cpu cores to be used during making. -h, --help Show command help. " @@ -100,6 +100,11 @@ builddate=${buildid:0:8} make_cores=$(nproc) log_dir=${workdir}/log if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi +if [ "x${board}" == "xraspberrypi" ]; then + config_dir=${cur_dir}/configs-rpi +else + config_dir=${cur_dir}/configs +fi parseargs "$@" || help $? @@ -123,7 +128,7 @@ docker_img_name=${docker_img_name##*: } LOG build board image with docker: ${docker_file}. -(echo "FROM $docker_img_name" && grep -v FROM ${cur_dir}/configs/Dockerfile) | \ +(echo "FROM $docker_img_name" && grep -v FROM ${config_dir}/Dockerfile) | \ docker build -t ${docker_img_name}-${buildid} \ --build-arg board=${board} \ --build-arg docker_file=${docker_file} \ @@ -134,7 +139,7 @@ LOG build board image with docker: ${docker_file}. --build-arg repo_file=${repo_file} \ --build-arg spec_param=${spec_param} \ --build-arg make_cores=${make_cores} \ - --no-cache -f- ${cur_dir}/configs + --no-cache -f- ${config_dir} echo docker run --rm --privileged=true \ -v ${cur_dir}:/work \ diff --git a/scripts/build.sh b/scripts/build.sh index 41d7655..7ee0642 100755 --- a/scripts/build.sh +++ b/scripts/build.sh @@ -1,18 +1,20 @@ #!/bin/bash +set -e +set -x __usage=" Usage: build [OPTIONS] -Build Rockchip bootable images. +Build openEuler bootable images. The target bootable compressed images will be generated in the build/YYYY-MM-DD folder of the directory where the build script is located. Options: --board BOARD_CONFIG Required! The config of target board in the boards folder, which defaults to firefly-rk3399. - -n, --name IMAGE_NAME The Rockchip image name to be built. + -n, --name IMAGE_NAME The openEuler image name to be built. -k, --kernel KERNEL_URL The URL of kernel source's repository, which defaults to https://gitee.com/openeuler/rockchip-kernel.git. -b, --branch KERNEL_BRANCH The branch name of kernel source's repository, which defaults to openEuler-20.03-LTS. -c, --config KERNEL_DEFCONFIG The name/path of defconfig file when compiling kernel, which defaults to openeuler_rockchip_defconfig. -r, --repo REPO_INFO The URL/path of target repo file or list of repo's baseurls which should be a space separated list. - -s, --spec SPEC The image's specification: headless, xfce, ukui, dde or the file path of rpmlist. The default is headless. + -s, --spec SPEC The image's specification: headless, xfce, ukui, dde, gnome, devstation or the file path of rpmlist. The default is headless. --cores N The number of cpu cores to be used during making. -h, --help Show command help. " @@ -43,17 +45,17 @@ default_param() { branch=openEuler-20.03-LTS repo_file="https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo" kernel_url="https://gitee.com/openeuler/rockchip-kernel.git" - workdir=$cur_dir/build + workdir=${cur_dir}/build name=${branch}-${board}-aarch64-alpha1 make_cores=$(nproc) } save_param() { - if [ -f $workdir/.param_last ]; then - rm $workdir/.param_last + if [ -f ${workdir}/.param_last ]; then + rm ${workdir}/.param_last fi - if [ -f $workdir/.param ]; then - mv $workdir/.param $workdir/.param_last + if [ -f ${workdir}/.param ]; then + mv ${workdir}/.param ${workdir}/.param_last fi echo "board=$board default_defconfig=$default_defconfig @@ -63,7 +65,7 @@ platform=$platform branch=$branch repo_file=$repo_file kernel_url=$kernel_url -spec_param=$spec_param" > $workdir/.param +spec_param=$spec_param" > ${workdir}/.param } oe_deppkg_install() { @@ -148,8 +150,8 @@ LOG "DeviceTree name: ${dtb_name}." LOG "Target platform: ${platform}." used_param -if [ ! -d $workdir ]; then - mkdir $workdir +if [ ! -d ${workdir} ]; then + mkdir ${workdir} fi # Firefly Toolchain Repo @@ -160,15 +162,15 @@ host_arch=$(arch) save_param log_dir=${workdir}/log if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi -if [ -f $workdir/.done ];then +if [ -f ${workdir}/.done ];then LOG "Checking the previous build." - if [[ $(cat $workdir/.done | grep u-boot) == "u-boot" && \ - $(cat $workdir/.done | grep bootimg) == "bootimg" && \ - $(cat $workdir/.done | grep rootfs) == "rootfs" && \ - $(cat $workdir/.done | grep image) == "image" ]];then + if [[ $(cat ${workdir}/.done | grep u-boot) == "u-boot" && \ + $(cat ${workdir}/.done | grep bootimg) == "bootimg" && \ + $(cat ${workdir}/.done | grep rootfs) == "rootfs" && \ + $(cat ${workdir}/.done | grep image) == "image" ]];then LOG "Found complete build, clean build flag." - rm $workdir/.done - touch $workdir/.done + rm ${workdir}/.done + touch ${workdir}/.done fi else oe_deppkg_install @@ -179,18 +181,18 @@ else else LOG "You are running this script on a ${host_arch} mechine, progress...." fi - touch $workdir/.done + touch ${workdir}/.done fi -if [[ $(cat $workdir/.done | grep u-boot) != "u-boot" ]];then +if [[ $(cat ${workdir}/.done | grep u-boot) != "u-boot" ]];then bash ${cur_dir}/build_u-boot.sh fi -if [[ $(cat $workdir/.done | grep bootimg) != "bootimg" ]];then +if [[ $(cat ${workdir}/.done | grep bootimg) != "bootimg" ]];then bash ${cur_dir}/build_boot.sh fi -if [[ $(cat $workdir/.done | grep rootfs) != "rootfs" ]];then +if [[ $(cat ${workdir}/.done | grep rootfs) != "rootfs" ]];then if [[ "${host_arch}" == "x86_64" && "${arch}" == "arm64" ]];then LOG "You are running this script on a ${host_arch} mechine, installing qemu-user-static...." sudo rpm -ivh ${cur_dir}/bin/qemu-user-static-aarch64-x86_64.rpm diff --git a/scripts/build_boot.sh b/scripts/build_boot.sh index ab96139..f29048a 100755 --- a/scripts/build_boot.sh +++ b/scripts/build_boot.sh @@ -1,4 +1,6 @@ #!/bin/bash +set -e +set -x __usage=" Usage: build_boot [OPTIONS] @@ -21,30 +23,30 @@ help() } default_param() { - workdir=$cur_dir/build + workdir=${cur_dir}/build branch=openEuler-20.03-LTS default_defconfig=openeuler_rockchip_defconfig board=firefly-rk3399 dtb_name=rk3399-firefly platform=rockchip kernel_url="https://gitee.com/openeuler/rockchip-kernel.git" - boot_dir=$workdir/boot - log_dir=$workdir/log + boot_dir=${workdir}/boot + log_dir=${workdir}/log make_cores=$(nproc) } local_param(){ - if [ -f $workdir/.param ]; then - branch=$(cat $workdir/.param | grep branch) + if [ -f ${workdir}/.param ]; then + branch=$(cat ${workdir}/.param | grep branch) branch=${branch:7} - default_defconfig=$(cat $workdir/.param | grep default_defconfig) + default_defconfig=$(cat ${workdir}/.param | grep default_defconfig) default_defconfig=${default_defconfig:18} - board=$(cat $workdir/.param | grep board) + board=$(cat ${workdir}/.param | grep board) board=${board:6} - kernel_url=$(cat $workdir/.param | grep kernel_url) + kernel_url=$(cat ${workdir}/.param | grep kernel_url) kernel_url=${kernel_url:11} fi } @@ -101,50 +103,50 @@ LOG(){ LOSETUP_D_IMG(){ set +e - if [ -d $workdir/boot_emmc ]; then - if grep -q "$workdir/boot_emmc " /proc/mounts ; then - umount $workdir/boot_emmc + if [ -d ${workdir}/boot_emmc ]; then + if grep -q "${workdir}/boot_emmc " /proc/mounts ; then + umount ${workdir}/boot_emmc fi fi - if [ -d $workdir/boot_emmc ]; then - rm -rf $workdir/boot_emmc + if [ -d ${workdir}/boot_emmc ]; then + rm -rf ${workdir}/boot_emmc fi set -e } clone_and_check_kernel_source() { - cd $workdir + pushd ${workdir} if [ -d kernel ]; then - if [ -f $workdir/.param_last ]; then - last_branch=$(cat $workdir/.param_last | grep branch) + if [ -f ${workdir}/.param_last ]; then + last_branch=$(cat ${workdir}/.param_last | grep branch) last_branch=${last_branch:7} - last_default_defconfig=$(cat $workdir/.param_last | grep default_defconfig) + last_default_defconfig=$(cat ${workdir}/.param_last | grep default_defconfig) last_default_defconfig=${last_default_defconfig:18} - last_dtb_name=$(cat $workdir/.param_last | grep dtb_name) + last_dtb_name=$(cat ${workdir}/.param_last | grep dtb_name) last_dtb_name=${last_dtb_name:9} - last_platform_name=$(cat $workdir/.param_last | grep platform) - last_platform_name=${last_dtb_name:9} + last_platform_name=$(cat ${workdir}/.param_last | grep platform) + last_platform_name=${last_platform_name:9} - last_kernel_url=$(cat $workdir/.param_last | grep kernel_url) + last_kernel_url=$(cat ${workdir}/.param_last | grep kernel_url) last_kernel_url=${last_kernel_url:11} - cd $workdir/kernel + pushd ${workdir}/kernel git remote -v update lastest_kernel_version=$(git rev-parse @{u}) local_kernel_version=$(git rev-parse @) - cd $workdir + popd if [[ ${last_branch} != ${branch} || \ ${last_default_defconfig} != ${default_defconfig} || \ ${last_dtb_name} != ${dtb_name} || \ ${last_kernel_url} != ${kernel_url} || \ ${lastest_kernel_version} != ${local_kernel_version} ]]; then - if [ -d $workdir/kernel ];then rm -rf $workdir/kernel; fi - if [ -d $workdir/boot ];then rm -rf $workdir/boot; fi - if [ -f $workdir/boot.img ];then rm $workdir/boot.img; fi + if [ -d ${workdir}/kernel ];then rm -rf ${workdir}/kernel; fi + if [ -d ${workdir}/boot ];then rm -rf ${workdir}/boot; fi + if [ -f ${workdir}/boot.img ];then rm ${workdir}/boot.img; fi git clone --depth=1 -b $branch $kernel_url kernel LOG "clone kernel source done." fi @@ -153,94 +155,146 @@ clone_and_check_kernel_source() { git clone --depth=1 -b $branch $kernel_url kernel LOG "clone kernel source done." fi + popd } make_kernel(){ LOG "make kernel(${default_defconfig}) begin..." kernel_dir_tmp=$1 - cd "${kernel_dir_tmp}" - if [ "x${kernel_defconfig:0:1}" != "x/" ]; then - if [ ! -f arch/arm64/configs/${kernel_defconfig} ]; then - ERROR "config file ${kernel_defconfig} can not be found in kernel source". - exit 2 + pushd "${kernel_dir_tmp}" + if [ -n "${kernel_defconfig}" ]; then + if [ "x${kernel_defconfig:0:1}" != "x/" ]; then + if [ ! -f arch/arm64/configs/${kernel_defconfig} ]; then + ERROR "config file ${kernel_defconfig} can not be found in kernel source". + exit 2 + fi + kernel_defconfig=arch/arm64/configs/${kernel_defconfig} fi - kernel_defconfig=arch/arm64/configs/${kernel_defconfig} fi if [ ! -z "${cross_compile}" ]; then export CROSS_COMPILE=${cross_compile} fi make distclean + kernel_ver="" + if [ "x${board}" == "xraspberrypi" ]; then + kernel_ver=$(awk '/^VERSION = / {v=$3} /^PATCHLEVEL = / {p=$3} /^SUBLEVEL = / {s=$3} /^EXTRAVERSION = / {e=$3} END {print v"."p"."s (e ? "-" e : "") "+"}' Makefile) + if [ -z "${kernel_defconfig}" ]; then + if [ "x${branch}" == "xOLK-6.6" ]; then + make ARCH=arm64 -j${make_cores} O=output/v8 bcm2711_defconfig + make ARCH=arm64 -j${make_cores} O=output/v8 KERNELRELEASE=${kernel_ver}-v8 + + make ARCH=arm64 -j${make_cores} O=output/2712 bcm2712_defconfig + make ARCH=arm64 -j${make_cores} O=output/2712 KERNELRELEASE=${kernel_ver}-2712 + + cp output/2712/arch/arm64/boot/Image arch/arm64/boot/Image + cp output/2712/arch/arm64/boot/dts/${platform}/${dtb_name}.dtb arch/arm64/boot/dts/${platform}/${dtb_name}.dtb + LOG "make kernel(bcm2711_defconfig, bcm2712_defconfig) for Raspberry Pi end." + return + else + kernel_defconfig="arch/arm64/configs/bcm2711_defconfig" + fi + fi + fi cp ${kernel_defconfig} .config make ARCH=arm64 olddefconfig kernel_defconfig=${kernel_defconfig##*/} make ARCH=arm64 -j${make_cores} LOG "make kernel(${default_defconfig}) end." + popd } install_kernel() { - if [ ! -f $workdir/kernel/arch/arm64/boot/Image ]; then + if [ ! -f ${workdir}/kernel/arch/arm64/boot/Image ]; then ERROR "kernel Image can not be found!" exit 2 else LOG "make kernel done." fi - if [ -d $workdir/kernel/kernel-modules ];then rm -rf $workdir/kernel/kernel-modules; fi + if [ -d ${workdir}/kernel/kernel-modules ];then rm -rf ${workdir}/kernel/kernel-modules; fi if [ -d ${boot_dir} ];then rm -rf ${boot_dir}; fi mkdir -p ${boot_dir} - mkdir -p $workdir/kernel/kernel-modules - cd $workdir/kernel + mkdir -p ${workdir}/kernel/kernel-modules + pushd ${workdir}/kernel if [ ! -z "${cross_compile}" ]; then export CROSS_COMPILE=${cross_compile} fi - make ARCH=arm64 install INSTALL_PATH=${boot_dir} - make ARCH=arm64 modules_install INSTALL_MOD_PATH=$workdir/kernel/kernel-modules - LOG "device tree name is ${dtb_name}.dtb" - cp arch/arm64/boot/dts/${platform}/${dtb_name}.dtb ${boot_dir} - cp arch/arm64/boot/Image ${boot_dir} + if [ "x${board}" == "xraspberrypi" ]; then + mkdir -p ${boot_dir}/overlays + if [ -z "${kernel_defconfig}" ] && [ "x${branch}" == "xOLK-6.6" ]; then + rpi_version=("v8" "2712") + for rpi in "${rpi_version[@]}"; do + pushd output/${rpi} + make ARCH=arm64 -j${make_cores} modules_install INSTALL_MOD_PATH=${workdir}/kernel/kernel-modules + cp arch/arm64/boot/Image ${boot_dir}/Image-${rpi} + cp .config ${boot_dir}/config-${rpi} + cp System.map ${boot_dir}/System.map-${rpi} + popd + done + mv ${boot_dir}/Image-v8 ${boot_dir}/kernel8.img + mv ${boot_dir}/Image-2712 ${boot_dir}/kernel_2712.img + cp output/2712/arch/arm64/boot/dts/${platform}/*.dtb ${boot_dir} + cp output/2712/arch/arm64/boot/dts/overlays/*.dtb* ${boot_dir}/overlays/ + else + make ARCH=arm64 -j${make_cores} modules_install INSTALL_MOD_PATH=${workdir}/kernel/kernel-modules + cp arch/arm64/boot/Image ${boot_dir}/kernel8.img + cp .config ${boot_dir}/config + cp System.map ${boot_dir}/System.map + cp arch/arm64/boot/dts/${platform}/*.dtb ${boot_dir} + cp arch/arm64/boot/dts/overlays/*.dtb* ${boot_dir}/overlays/ + fi + else + make ARCH=arm64 install INSTALL_PATH=${boot_dir} + make ARCH=arm64 -j${make_cores} modules_install INSTALL_MOD_PATH=${workdir}/kernel/kernel-modules + cp arch/arm64/boot/Image ${boot_dir} + cp arch/arm64/boot/dts/${platform}/*.dtb ${boot_dir} + fi + rm -rf ${workdir}/kernel/kernel-modules/lib/modules/*/source ${workdir}/kernel/kernel-modules/lib/modules/*/build LOG "prepare kernel done." + popd } mk_boot() { LOG "start make bootimg..." - mkdir -p ${boot_dir}/extlinux + if [ "x${board}" != "xraspberrypi" ]; then + mkdir -p ${boot_dir}/extlinux - LOG "start gen initrd..." - dracut --no-kernel ${boot_dir}/initrd.img - LOG "gen initrd done." + LOG "start gen initrd..." + dracut --no-kernel ${boot_dir}/initrd.img + LOG "gen initrd done." - dtb_name=$(ls $boot_dir | grep dtb) - LOG "gen extlinux config for $dtb_name" - if [ "${platform}" == "rockchip" ];then - bootargs=${rockchip_bootargs} - elif [ "${platform}" == "phytium" ];then - bootargs=${phytium_bootargs} - elif [ "${platform}" == "allwinner" ];then - bootargs=${allwinner_bootargs} - else - echo "Unsupported platform" - exit 2 + dtb_name=$(ls ${boot_dir} | grep dtb) + LOG "gen extlinux config for $dtb_name" + if [ "${platform}" == "rockchip" ];then + bootargs=${rockchip_bootargs} + elif [ "${platform}" == "phytium" ];then + bootargs=${phytium_bootargs} + elif [ "${platform}" == "allwinner" ];then + bootargs=${allwinner_bootargs} + else + echo "Unsupported platform" + exit 2 + fi + echo "label openEuler + kernel /Image + initrd /initrd.img + fdt /${dtb_name} + append ${bootargs}" \ + > ${boot_dir}/extlinux/extlinux.conf + + LOG "gen extlinux config done." fi - echo "label openEuler - kernel /Image - initrd /initrd.img - fdt /${dtb_name} - append ${bootargs}" \ - > ${boot_dir}/extlinux/extlinux.conf + dd if=/dev/zero of=${workdir}/boot.img bs=1M count=240 status=progress + mkfs.vfat -n boot ${workdir}/boot.img + if [ -d ${workdir}/boot_emmc ];then rm -rf ${workdir}/boot_emmc; fi + mkdir ${workdir}/boot_emmc + mount ${workdir}/boot.img ${workdir}/boot_emmc/ + cp -r ${boot_dir}/* ${workdir}/boot_emmc/ + umount ${workdir}/boot.img + rmdir ${workdir}/boot_emmc - LOG "gen extlinux config done." - - dd if=/dev/zero of=$workdir/boot.img bs=1M count=240 status=progress - mkfs.vfat -n boot $workdir/boot.img - if [ -d $workdir/boot_emmc ];then rm -rf $workdir/boot_emmc; fi - mkdir $workdir/boot_emmc - mount $workdir/boot.img $workdir/boot_emmc/ - cp -r ${boot_dir}/* $workdir/boot_emmc/ - umount $workdir/boot.img - rmdir $workdir/boot_emmc - - if [ -f $workdir/boot.img ]; then + if [ -f ${workdir}/boot.img ]; then LOG "make boot image done." else ERROR "make boot image failed!" @@ -257,19 +311,23 @@ cur_dir=$(cd $(dirname $0);pwd) default_param local_param parseargs "$@" || help $? -set -e rockchip_bootargs="earlyprintk console=ttyS2,1500000 rw root=UUID=614e0000-0000-4b53-8000-1d28000054a9 rootfstype=ext4 init=/sbin/init rootwait" phytium_bootargs="console=ttyAMA1,115200 earlycon=pl011,0x2800d000 rw root=UUID=614e0000-0000-4b53-8000-1d28000054a9 rootfstype=ext4 rootwait cma=256m" allwinner_bootargs="console=tty0 console=ttyS0,115200 rw root=UUID=614e0000-0000-4b53-8000-1d28000054a9 rootfstype=ext4 rootwait earlycon clk_gnore_unused" -if [ ! -f $default_defconfig ] ; then - LOG "kernel defconfig is : ${default_defconfig}" - kernel_defconfig=$default_defconfig -elif [ -f $default_defconfig ]; then - LOG "use local kernel defconfig..." - cp $default_defconfig ${workdir}/ - kernel_defconfig=${workdir}/${default_defconfig##*/} +if [ -n "${default_defconfig}" ]; then + if [ ! -f $default_defconfig ] ; then + LOG "kernel defconfig is : ${default_defconfig}" + kernel_defconfig=$default_defconfig + else + LOG "use local kernel defconfig..." + cp $default_defconfig ${workdir}/ + kernel_defconfig=${workdir}/${default_defconfig##*/} + fi +elif [ "x${board}" != "xraspberrypi" ]; then + LOG "default_defconfig is missing" + exit 1 fi cross_compile="" @@ -282,26 +340,37 @@ else LOG "You are running this script on a ${host_arch} mechine, progress...." fi -if [ ! -d $workdir ]; then - mkdir $workdir +if [ ! -d ${workdir} ]; then + mkdir ${workdir} fi -source $cur_dir/boards/${board}.conf +source ${cur_dir}/boards/${board}.conf if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi -if [ ! -f $workdir/.done ];then - touch $workdir/.done +if [ ! -f ${workdir}/.done ];then + touch ${workdir}/.done fi -sed -i 's/bootimg//g' $workdir/.done +sed -i 's/bootimg//g' ${workdir}/.done LOG "build boot..." + +if [ "x${board}" == "xraspberrypi" ] && [ -z "${kernel_url}" ]; then + LOG "build an empty boot.img for Raspberry Pi." + rm -rf ${workdir}/kernel || LOG "remove kernel source." + dd if=/dev/zero of=${workdir}/boot.img bs=1M count=10 status=progress + mkfs.vfat -n boot ${workdir}/boot.img + LOG "The boot.img is generated in the ${workdir}." + echo "bootimg" >> ${workdir}/.done + exit 0 +fi + clone_and_check_kernel_source -if [[ -f $workdir/kernel/arch/arm64/boot/dts/${platform}/${dtb_name}.dtb && -f $workdir/kernel/arch/arm64/boot/Image ]];then +if [[ -f ${workdir}/kernel/arch/arm64/boot/dts/${platform}/${dtb_name}.dtb && -f ${workdir}/kernel/arch/arm64/boot/Image ]];then LOG "kernel is the latest" else - make_kernel $workdir/kernel + make_kernel ${workdir}/kernel fi -if [[ -f $workdir/boot.img && $(cat $workdir/.done | grep bootimg) == "bootimg" ]];then +if [[ -f ${workdir}/boot.img && $(cat ${workdir}/.done | grep bootimg) == "bootimg" ]]; then LOG "boot is the latest" else trap 'LOSETUP_D_IMG' EXIT @@ -310,4 +379,4 @@ else mk_boot fi LOG "The boot.img is generated in the ${workdir}." -echo "bootimg" >> $workdir/.done +echo "bootimg" >> ${workdir}/.done diff --git a/scripts/build_rootfs.sh b/scripts/build_rootfs.sh index 6363bd2..c2b1509 100755 --- a/scripts/build_rootfs.sh +++ b/scripts/build_rootfs.sh @@ -1,4 +1,6 @@ #!/bin/bash +set -e +set +x __usage=" Usage: build_rootfs [OPTIONS] @@ -10,7 +12,7 @@ Options: --board, BOARD_CONFIG Required! The config of target board in the boards folder, which defaults to firefly-rk3399. -r, --repo REPO_INFO The URL/path of target repo file or list of repo's baseurls which should be a space separated list. -b, --branch KERNEL_BRANCH The branch name of kernel source's repository, which defaults to openEuler-20.03-LTS. - -s, --spec SPEC The image's specification: headless, xfce, ukui, dde or the file path of rpmlist. The default is headless. + -s, --spec SPEC The image's specification: headless, xfce, ukui, dde, gnome, devstation or the file path of rpmlist. The default is headless. -h, --help Show command help. " @@ -23,28 +25,33 @@ help() default_param() { board=firefly-rk3399 repo_file="https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo" + workdir=${cur_dir}/build tmp_dir=${workdir}/tmp - workdir=$cur_dir/build branch=openEuler-20.03-LTS rootfs_arch=aarch64 - nonfree_bin_dir=${workdir}/../bin + nonfree_bin_dir=${cur_dir}/bin + config_dir=${cur_dir}/configs rootfs_dir=${workdir}/rootfs log_dir=${workdir}/log + rootfs_mnt=${workdir}/rootfs_tmp } local_param(){ - if [ -f $workdir/.param ]; then - board=$(cat $workdir/.param | grep board) + if [ -f ${workdir}/.param ]; then + board=$(cat ${workdir}/.param | grep board) board=${board:6} - repo_file=$(cat $workdir/.param | grep repo_file) + repo_file=$(cat ${workdir}/.param | grep repo_file) repo_file=${repo_file:10} - branch=$(cat $workdir/.param | grep branch) + branch=$(cat ${workdir}/.param | grep branch) branch=${branch:7} - spec_param=$(cat $workdir/.param | grep spec_param) + spec_param=$(cat ${workdir}/.param | grep spec_param) spec_param=${spec_param:11} + + kernel_url=$(cat ${workdir}/.param | grep kernel_url) + kernel_url=${kernel_url:11} fi } @@ -96,13 +103,13 @@ LOG(){ LOSETUP_D_IMG(){ set +e - if [ -d ${workdir}/rootfs_tmp ]; then - if grep -q "${workdir}/rootfs_tmp " /proc/mounts ; then - umount ${workdir}/rootfs_tmp + if [ -d ${rootfs_mnt} ]; then + if grep -q "${rootfs_mnt} " /proc/mounts ; then + umount ${rootfs_mnt} fi fi - if [ -d ${workdir}/rootfs_tmp ]; then - rm -rf ${workdir}/rootfs_tmp + if [ -d ${rootfs_mnt} ]; then + rm -rf ${rootfs_mnt} fi set -e } @@ -140,14 +147,17 @@ INSTALL_PACKAGES(){ ERROR can not install $item. fi done + if [ "x${board}" == "xraspberrypi" ] && [ -z "${kernel_url}" ]; then + chroot ${rootfs_dir}/ dnf ${tmp_repo_info} --disablerepo="*" install -y raspberrypi-kernel --nogpgcheck + if [ $? == 0 ]; then + LOG install raspberrypi-kernel. + else + ERROR can not install raspberrypi-kernel. + fi + fi } build_rootfs() { - trap 'UMOUNT_ALL' EXIT - cd $workdir - if [ -d rootfs ];then rm -rf rootfs; fi - mkdir rootfs - if [ ! -d ${tmp_dir} ]; then mkdir -p ${tmp_dir} else @@ -156,8 +166,8 @@ build_rootfs() { if [ "x$spec_param" == "xheadless" ] || [ "x$spec_param" == "x" ]; then : - elif [ "x$spec_param" == "xxfce" ] || [ "x$spec_param" == "xukui" ] || [ "x$spec_param" == "xdde" ]; then - CONFIG_RPM_LIST=$workdir/../configs/rpmlist-${spec_param} + elif [ "x$spec_param" == "xxfce" ] || [ "x$spec_param" == "xukui" ] || [ "x$spec_param" == "xdde" ] || [ "x$spec_param" == "xgnome" ] || [ "x$spec_param" == "xdevstation" ]; then + CONFIG_RPM_LIST=${config_dir}/rpmlist-${spec_param} elif [ -f ${spec_param} ]; then cp ${spec_param} ${tmp_dir}/ spec_file_name=${spec_param##*/} @@ -166,16 +176,13 @@ build_rootfs() { echo `date` - ERROR, please check your params in option -s or --spec. exit 2 fi - - mkdir -p ${rootfs_dir}/var/lib/rpm - rpm --root ${rootfs_dir}/ --initdb + echo $(pwd) if [ "x$repo_file" == "x" ] ; then echo `date` - ERROR, \"-r REPO_INFO or --repo REPO_INFO\" missing. help 2 elif [ "x${repo_file:0:4}" == "xhttp" ]; then if [ "x${repo_file:0-5}" == "x.repo" ]; then - repo_url=${repo_file} wget ${repo_file} -P ${tmp_dir}/ repo_file_name=${repo_file##*/} repo_file=${tmp_dir}/${repo_file_name} @@ -186,7 +193,7 @@ build_rootfs() { for baseurl in ${repo_file// / } do echo [repo${index}] >> ${repo_file_tmp} - echo name=repo${index} to build rk3399 image >> ${repo_file_tmp} + echo name=repo${index} to build ${board} image >> ${repo_file_tmp} echo baseurl=${baseurl} >> ${repo_file_tmp} echo enabled=1 >> ${repo_file_tmp} echo gpgcheck=0 >> ${repo_file_tmp} @@ -222,12 +229,12 @@ build_rootfs() { done os_release_name="openEuler-release" - dnf ${repo_info} --disablerepo="*" --downloaddir=${workdir}/ download ${os_release_name} --forcearch ${rootfs_arch} + dnf ${repo_info} --disablerepo="*" --downloaddir=${tmp_dir}/ download ${os_release_name} --forcearch ${rootfs_arch} if [ $? != 0 ]; then ERROR "Fail to download ${os_release_name}!" exit 2 fi - os_release_name=`ls -r ${workdir}/${os_release_name}*.rpm 2>/dev/null| head -n 1` + os_release_name=`ls -r ${tmp_dir}/${os_release_name}*.rpm 2>/dev/null| head -n 1` if [ -z "${os_release_name}" ]; then ERROR "${os_release_name} can not be found!" exit 2 @@ -235,6 +242,16 @@ build_rootfs() { LOG "Success to download ${os_release_name}." fi + LOG "make rootfs for ${repo_file} begin..." + trap 'UMOUNT_ALL' EXIT + if [ -d ${rootfs_dir} ]; then + UMOUNT_ALL + rm -rf ${rootfs_dir} + fi + mkdir ${rootfs_dir} + + mkdir -p ${rootfs_dir}/var/lib/rpm + rpm --root ${rootfs_dir}/ --initdb rpm -ivh --nodeps --root ${rootfs_dir}/ ${os_release_name} --ignorearch mkdir -p ${rootfs_dir}/etc/rpm @@ -248,52 +265,41 @@ build_rootfs() { mount --bind /dev ${rootfs_dir}/dev mount -t proc /proc ${rootfs_dir}/proc mount -t sysfs /sys ${rootfs_dir}/sys - - INSTALL_PACKAGES ${CONFIG_RPM_LIST} "${repo_info}" - - rm -rf ${rootfs_dir}/*.core - rm ${workdir}/*rpm - - for dns in $default_dns - do - echo " nameserver ${dns}" >> "${rootfs_dir}/etc/resolv.conf" - done - - if [ ! -d ${rootfs_dir}/etc/sysconfig/network-scripts ]; then mkdir "${rootfs_dir}/etc/sysconfig/network-scripts"; fi - echo " TYPE=Ethernet - PROXY_METHOD=none - BROWSER_ONLY=no - BOOTPROTO=dhcp - DEFROUTE=yes - IPV4_FAILURE_FATAL=no - IPV6INIT=yes - IPV6_AUTOCONF=yes - IPV6_DEFROUTE=yes - IPV6_FAILURE_FATAL=no - IPV6_ADDR_GEN_MODE=stable-privacy - NAME=eth0 - UUID=851a6f36-e65c-3a43-8f4a-78fd0fc09dc9 - ONBOOT=yes - AUTOCONNECT_PRIORITY=-999 - DEVICE=eth0" > "${rootfs_dir}/etc/sysconfig/network-scripts/ifup-eth0" - - LOG "Configure network done." - - cp $nonfree_bin_dir/../bin/extend-root.sh ${rootfs_dir}/etc/rc.d/init.d/extend-root.sh - chmod +x ${rootfs_dir}/etc/rc.d/init.d/extend-root.sh - set +e - sed -i -e '/^#NTP=/cNTP=0.cn.pool.ntp.org' ${rootfs_dir}/etc/systemd/timesyncd.conf - sed -i -e 's/#FallbackNTP=/FallbackNTP=1.asia.pool.ntp.org 2.asia.pool.ntp.org /g' ${rootfs_dir}/etc/systemd/timesyncd.conf + INSTALL_PACKAGES ${CONFIG_RPM_LIST} "${repo_info}" + cat ${rootfs_dir}/etc/systemd/timesyncd.conf | grep "^NTP=*" + if [ $? -ne 0 ]; then + sed -i -e '/^#NTP=/cNTP=0.cn.pool.ntp.org' ${rootfs_dir}/etc/systemd/timesyncd.conf + sed -i -e 's/#FallbackNTP=/FallbackNTP=1.asia.pool.ntp.org 2.asia.pool.ntp.org /g' ${rootfs_dir}/etc/systemd/timesyncd.conf + fi set -e - cat << EOF | chroot ${rootfs_dir} /bin/bash - echo 'openeuler' | passwd --stdin root - echo openEuler > /etc/hostname - ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime - chkconfig --add extend-root.sh - chkconfig extend-root.sh on -EOF + rm -rf ${rootfs_dir}/*.core + + cp -Lp ${config_dir}/resolv.conf ${rootfs_dir}/etc/resolv.conf + + if [ ! -d ${rootfs_dir}/etc/sysconfig/network-scripts ]; then mkdir "${rootfs_dir}/etc/sysconfig/network-scripts"; fi + cp -Lp ${config_dir}/ifcfg-eth0 ${rootfs_dir}/etc/sysconfig/network-scripts/ifcfg-eth0 + + LOG "Configure network done." + + if [ "x${board}" == "xraspberrypi" ]; then + mkdir -p ${rootfs_dir}/lib/udev/rules.d + if [ ! -d ${rootfs_dir}/usr/share/licenses/raspi ]; then mkdir -p ${rootfs_dir}/usr/share/licenses/raspi; fi + cp ${config_dir}/hosts ${rootfs_dir}/etc/hosts + cp ${config_dir}/*.rules ${rootfs_dir}/lib/udev/rules.d/ + cp ${config_dir}/LICENCE.* ${rootfs_dir}/usr/share/licenses/raspi/ + fi + + if [ ! -d ${rootfs_dir}/etc/rc.d/init.d ]; then mkdir -p ${rootfs_dir}/etc/rc.d/init.d; fi + cp -Lp ${config_dir}/extend-root.sh ${rootfs_dir}/etc/rc.d/init.d/extend-root.sh + chmod +x ${rootfs_dir}/etc/rc.d/init.d/extend-root.sh + echo net.ipv4.conf.wlan0.rp_filter=0 >> ${rootfs_dir}/etc/sysctl.conf + + cp -Lp ${config_dir}/chroot.sh ${rootfs_dir}/chroot.sh + chmod +x ${rootfs_dir}/chroot.sh + + chroot ${rootfs_dir} /bin/bash -c "echo 'Y' | /chroot.sh ${spec_param}" LOG "Set NTP and auto expand rootfs done." @@ -304,11 +310,13 @@ EOF POST_BOARD_OVERLAY UMOUNT_ALL + rm ${rootfs_dir}/chroot.sh + LOG "make rootfs for ${repo_file} end." + } mk_rootfsimg() { trap 'LOSETUP_D_IMG' EXIT - cd $workdir rootfs_size=`du -sh --block-size=1MiB ${rootfs_dir} | cut -f 1 | xargs` mod_size=`du -sh --block-size=1MiB ${workdir}/kernel/kernel-modules/lib/modules | cut -f 1 | xargs` size=$(($rootfs_size+$mod_size+100)) @@ -316,17 +324,17 @@ mk_rootfsimg() { dd if=/dev/zero of=${rootfs_img} bs=1MiB count=$size status=progress && sync mkfs.ext4 -L rootfs ${workdir}/rootfs.img - if [ -d ${workdir}/rootfs_tmp ];then rm -rf ${workdir}/rootfs_tmp; fi - mkdir ${workdir}/rootfs_tmp - mount ${workdir}/rootfs.img ${workdir}/rootfs_tmp + if [ -d ${rootfs_mnt} ];then rm -rf ${rootfs_mnt}; fi + mkdir ${rootfs_mnt} + mount ${workdir}/rootfs.img ${rootfs_mnt} - rsync -avHAXq ${rootfs_dir}/* ${workdir}/rootfs_tmp + rsync -avHAXq ${rootfs_dir}/* ${rootfs_mnt} sync sleep 10 LOSETUP_D_IMG - if [ -f $workdir/rootfs.img ]; then + if [ -f ${workdir}/rootfs.img ]; then LOG "make rootfs image done." else ERROR "make rootfs image failed!" @@ -343,7 +351,10 @@ default_param local_param parseargs "$@" || help $? -CONFIG_RPM_LIST=$workdir/../configs/rpmlist +if [ "x${board}" == "xraspberrypi" ]; then + config_dir=${cur_dir}/configs-rpi +fi +CONFIG_RPM_LIST=${config_dir}/rpmlist POST_BOARD_OVERLAY() { echo "Initial POST_BOARD_OVERLAY function" # It will be overwritten by board.conf. @@ -353,44 +364,39 @@ if [[ "x$arch" == "arm64" ]]; then rootfs_arch="aarch64" fi -default_dns="8.8.8.8 8.8.4.4 114.114.114.114" - -if [ ! -d $workdir ]; then - mkdir $workdir +if [ ! -d ${workdir} ]; then + mkdir ${workdir} fi -source $cur_dir/boards/${board}.conf +source ${cur_dir}/boards/${board}.conf if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi -if [ ! -f $workdir/.done ];then - touch $workdir/.done +if [ ! -f ${workdir}/.done ];then + touch ${workdir}/.done fi -cd $workdir -sed -i 's/rootfs//g' $workdir/.done +sed -i 's/rootfs//g' ${workdir}/.done LOG "build rootfs..." -if [ -d rootfs ]; then - if [[ -f $workdir/rootfs.img && $(cat $workdir/.done | grep rootfs) == "rootfs" ]];then - if [ -f $workdir/.param_last ];then - last_branch=$(cat $workdir/.param_last | grep branch) +if [ -d ${rootfs_dir} ]; then + if [[ -f ${workdir}/rootfs.img && $(cat ${workdir}/.done | grep rootfs) == "rootfs" ]];then + if [ -f ${workdir}/.param_last ];then + last_branch=$(cat ${workdir}/.param_last | grep branch) last_branch=${last_branch:7} - last_board=$(cat $workdir/.param_last | grep board) + last_board=$(cat ${workdir}/.param_last | grep board) last_board=${last_board:6} - last_repo_file=$(cat $workdir/.param_last | grep repo_file) + last_repo_file=$(cat ${workdir}/.param_last | grep repo_file) last_repo_file=${last_repo_file:10} - last_spec_param=$(cat $workdir/.param_last | grep spec_param) + last_spec_param=$(cat ${workdir}/.param_last | grep spec_param) last_spec_param=${last_spec_param:11} if [[ ${last_branch} != ${branch} || ${last_board} != ${board} || ${last_repo_file} != ${repo_file} || ${last_spec_param} != ${spec_param} ]]; then - rm -rf rootfs build_rootfs mk_rootfsimg fi fi else - rm -rf rootfs build_rootfs mk_rootfsimg fi @@ -399,4 +405,4 @@ else mk_rootfsimg fi LOG "The rootfs.img is generated in the ${workdir}." -echo "rootfs" >> $workdir/.done +echo "rootfs" >> ${workdir}/.done diff --git a/scripts/build_u-boot.sh b/scripts/build_u-boot.sh index b84edc8..4f36387 100755 --- a/scripts/build_u-boot.sh +++ b/scripts/build_u-boot.sh @@ -1,4 +1,6 @@ #!/bin/bash +set -e +set -x __usage=" Usage: build_u-boot [OPTIONS] @@ -19,17 +21,17 @@ help() default_param() { board=firefly-rk3399 - workdir=$cur_dir/build + workdir=${cur_dir}/build u_boot_url="https://gitlab.arm.com/systemready/firmware-build/u-boot.git" rk3399_bl31_url="https://github.com/rockchip-linux/rkbin/raw/master/bin/rk33/rk3399_bl31_v1.36.elf" - log_dir=$workdir/log - nonfree_bin_dir=${workdir}/../bin + log_dir=${workdir}/log + nonfree_bin_dir=${cur_dir}/bin make_cores=$(nproc) } local_param(){ - if [ -f $workdir/.param ]; then - board=$(cat $workdir/.param | grep board) + if [ -f ${workdir}/.param ]; then + board=$(cat ${workdir}/.param | grep board) board=${board:6} fi } @@ -73,14 +75,14 @@ LOG(){ } build_u-boot() { - cd $workdir - if [ -d u-boot ];then - cd u-boot + pushd ${workdir} + if [ -d ${workdir}/u-boot ];then + pushd ${workdir}/u-boot remote_url_exist=`git remote -v | grep "origin"` remote_url=`git ls-remote --get-url origin` + popd if [[ ${remote_url_exist} = "" || ${remote_url} != ${u_boot_url} ]]; then - cd ../ - rm -rf $workdir/u-boot + rm -rf ${workdir}/u-boot git clone --depth=1 -b ${u_boot_ver} ${u_boot_url} if [[ $? -eq 0 ]]; then LOG "clone u-boot done." @@ -93,8 +95,9 @@ build_u-boot() { git clone --depth=1 -b ${u_boot_ver} ${u_boot_url} LOG "clone u-boot done." fi - cd $workdir/u-boot - if [[ -f $workdir/u-boot/u-boot.itb && -f $workdir/u-boot/idbloader.img ]];then + popd + pushd ${workdir}/u-boot + if [[ -f ${workdir}/u-boot/u-boot.itb && -f ${workdir}/u-boot/idbloader.img ]];then LOG "u-boot is the latest" else if [ -f bl31.elf ];then rm bl31.elf; fi @@ -116,23 +119,24 @@ build_u-boot() { ERROR "make u-boot failed!" exit 2 fi + popd } use_prebuild_u-boot() { - if [ -d $workdir/u-boot ]; then - rm -rf $workdir/u-boot + if [ -d ${workdir}/u-boot ]; then + rm -rf ${workdir}/u-boot fi - mkdir $workdir/u-boot + mkdir ${workdir}/u-boot if [[ "x${platform}" == "xrockchip" ]]; then - cp ${local_uboot_dir}/* $workdir/u-boot + cp ${local_uboot_dir}/* ${workdir}/u-boot elif [[ "x${platform}" == "xphytium" ]]; then - cp ${local_uboot_dir}/fip-all-sd-boot.bin $workdir/u-boot - mkenvimage -s 0x1000 -o $workdir/u-boot/env.bin ${local_uboot_dir}/env.txt - dd if=$workdir/u-boot/env.bin of=$workdir/u-boot/fip-all-sd-boot.bin bs=1k seek=1472 conv=notrunc + cp ${local_uboot_dir}/fip-all-sd-boot.bin ${workdir}/u-boot + mkenvimage -s 0x1000 -o ${workdir}/u-boot/env.bin ${local_uboot_dir}/env.txt + dd if=${workdir}/u-boot/env.bin of=${workdir}/u-boot/fip-all-sd-boot.bin bs=1k seek=1472 conv=notrunc elif [[ "x${platform}" == "xallwinner" ]]; then - cp ${local_uboot_dir}/* $workdir/u-boot + cp ${local_uboot_dir}/* ${workdir}/u-boot else echo "target u-boot can not found!" exit 2 @@ -156,24 +160,28 @@ else LOG "You are running this script on a ${host_arch} mechine, progress...." fi -if [ ! -d $workdir ]; then - mkdir $workdir +if [ ! -d ${workdir} ]; then + mkdir ${workdir} fi -source $cur_dir/boards/${board}.conf +source ${cur_dir}/boards/${board}.conf if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi -if [ ! -f $workdir/.done ];then - touch $workdir/.done +if [ ! -f ${workdir}/.done ];then + touch ${workdir}/.done fi -sed -i 's/u-boot//g' $workdir/.done +sed -i 's/u-boot//g' ${workdir}/.done LOG "build u-boot..." -if [ "x$ubootconfig" == "xnone" ]; then - use_prebuild_u-boot +if [ "x${board}" == "xraspberrypi" ]; then + LOG "Skip build u-boot for Raspberry Pi." else - build_u-boot + if [ "x$ubootconfig" == "x" ]; then + use_prebuild_u-boot + else + build_u-boot + fi + LOG "The bootloader files are generated in the ${workdir}/u-boot." fi -LOG "The bootloader files are generated in the ${workdir}/u-boot." -echo "u-boot" >> $workdir/.done +echo "u-boot" >> ${workdir}/.done diff --git a/scripts/configs-rpi/99-com.rules b/scripts/configs-rpi/99-com.rules new file mode 100644 index 0000000..b41e9db --- /dev/null +++ b/scripts/configs-rpi/99-com.rules @@ -0,0 +1,61 @@ +SUBSYSTEM=="input", GROUP="input", MODE="0660" +SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660" +SUBSYSTEM=="spidev", GROUP="spi", MODE="0660" +SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660" +SUBSYSTEM=="rpivid-*", GROUP="video", MODE="0660" + +KERNEL=="vcsm-cma", GROUP="video", MODE="0660" +SUBSYSTEM=="dma_heap", GROUP="video", MODE="0660" + +SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660" +SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\ + chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\ + chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770 /sys/devices/virtual/gpio;\ + chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\ +'" + +SUBSYSTEM=="pwm*", PROGRAM="/bin/sh -c '\ + chown -R root:gpio /sys/class/pwm && chmod -R 770 /sys/class/pwm;\ + chown -R root:gpio /sys/devices/platform/soc/*.pwm/pwm/pwmchip* && chmod -R 770 /sys/devices/platform/soc/*.pwm/pwm/pwmchip*\ +'" + +KERNEL=="ttyAMA0", PROGRAM="/bin/sh -c '\ + ALIASES=/proc/device-tree/aliases; \ + if cmp -s $$ALIASES/uart0 $$ALIASES/serial0; then \ + echo 0;\ + elif cmp -s $$ALIASES/uart0 $$ALIASES/serial1; then \ + echo 1; \ + else \ + exit 1; \ + fi\ +'", SYMLINK+="serial%c" + +KERNEL=="ttyAMA1", PROGRAM="/bin/sh -c '\ + ALIASES=/proc/device-tree/aliases; \ + if [ -e /dev/ttyAMA0 ]; then \ + exit 1; \ + elif cmp -s $$ALIASES/uart0 $$ALIASES/serial0; then \ + echo 0;\ + elif cmp -s $$ALIASES/uart0 $$ALIASES/serial1; then \ + echo 1; \ + else \ + exit 1; \ + fi\ +'", SYMLINK+="serial%c" + +KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\ + ALIASES=/proc/device-tree/aliases; \ + if cmp -s $$ALIASES/uart1 $$ALIASES/serial0; then \ + echo 0; \ + elif cmp -s $$ALIASES/uart1 $$ALIASES/serial1; then \ + echo 1; \ + else \ + exit 1; \ + fi \ +'", SYMLINK+="serial%c" + +ACTION=="add", SUBSYSTEM=="vtconsole", KERNEL=="vtcon1", RUN+="/bin/sh -c '\ + if echo RPi-Sense FB | cmp -s /sys/class/graphics/fb0/name; then \ + echo 0 > /sys$devpath/bind; \ + fi; \ +'" diff --git a/scripts/configs-rpi/Dockerfile b/scripts/configs-rpi/Dockerfile new file mode 120000 index 0000000..ddb389f --- /dev/null +++ b/scripts/configs-rpi/Dockerfile @@ -0,0 +1 @@ +../configs/Dockerfile \ No newline at end of file diff --git a/scripts/configs-rpi/Dockerfile_makeraspi b/scripts/configs-rpi/Dockerfile_makeraspi new file mode 100644 index 0000000..0ba1932 --- /dev/null +++ b/scripts/configs-rpi/Dockerfile_makeraspi @@ -0,0 +1,13 @@ +FROM openeuler-20.03-lts-sp1:latest + +RUN dnf clean expire-cache + +RUN dnf -y install cmake gdb gcc gcc-c++ libstdc++-static ncurses ncurses-devel make python bash coreutils && \ + dnf -y clean all + +RUN dnf -y install module-init-tools git openssl-devel bc bison flex dnf-plugins-core dosfstools parted wget device-mapper-multipath grep xz kpartx +RUN dnf -y install rsync passwd diffutils +ENV SHELL=/bin/bash + +ENTRYPOINT ["/bin/bash", "/work/build-image.sh"] + diff --git a/scripts/configs-rpi/LICENCE.raspberrypi-sys-mods b/scripts/configs-rpi/LICENCE.raspberrypi-sys-mods new file mode 100644 index 0000000..bb23a05 --- /dev/null +++ b/scripts/configs-rpi/LICENCE.raspberrypi-sys-mods @@ -0,0 +1,32 @@ +Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ +Upstream-Name: raspberrypi-sys-mods +Source: https://github.com/RPi-Distro/raspberrypi-sys-mods + +Files: * +Copyright: 2015 Raspberry Pi Foundation +License: BSD-3-Clause + +License: BSD-3-Clause + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. Neither the name of the University nor the names of its contributors + may be used to endorse or promote products derived from this software + without specific prior written permission. + . + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE HOLDERS OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/scripts/configs-rpi/chroot.sh b/scripts/configs-rpi/chroot.sh new file mode 100755 index 0000000..168aa8a --- /dev/null +++ b/scripts/configs-rpi/chroot.sh @@ -0,0 +1,53 @@ +#!/bin/bash +systemctl enable sshd +systemctl enable systemd-timesyncd +systemctl enable hciuart +systemctl enable haveged +echo openEuler > /etc/hostname +echo "openeuler" | passwd --stdin root +useradd -m -G "wheel" -s "/bin/bash" pi +echo "raspberry" | passwd --stdin pi +if [ -f /usr/share/zoneinfo/Asia/Shanghai ]; then + if [ -f /etc/localtime ]; then + rm -f /etc/localtime + fi + ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime +fi +if [ -f /etc/rc.d/rc.local ]; then + chmod +x /etc/rc.d/rc.local +fi +if [ "x$1" == "xxfce" ]; then + echo "user-session=xfce" >> /etc/lightdm/lightdm.conf.d/60-lightdm-gtk-greeter.conf + sed -i -e 's/^background=/#background=/' /etc/lightdm/lightdm-gtk-greeter.conf + sed -i -e '/^#background=/cbackground=/usr/share/backgrounds/xfce/xfce-blue.jpg' /etc/lightdm/lightdm-gtk-greeter.conf +elif [ "x$1" == "xdde" ]; then + if id openeuler; then + userdel -r openeuler + fi +fi +cd /etc/rc.d/init.d +chmod +x extend-root.sh +chkconfig --add extend-root.sh +chkconfig extend-root.sh on +cd - +ln -s /lib/firmware /etc/firmware +if [ -f /etc/locale.conf ]; then + sed -i -e "s/^LANG/#LANG/" /etc/locale.conf +fi +if [ "x$1" == "xxfce" ] || [ "x$1" == "xukui" ] || [ "x$1" == "xdde" ] || [ "x$1" == "xgnome" ] || [ "x$1" == "xdevstation" ]; then + echo 'LANG="zh_CN.UTF-8"' >> /etc/locale.conf + cat << EOF > /etc/X11/xorg.conf.d/99-vc4.conf +Section "OutputClass" + Identifier "vc4" + MatchDriver "vc4" + Driver "modesetting" + Option "PrimaryGPU" "true" +EndSection +EOF + systemctl set-default graphical.target +else + echo 'LANG="en_US.utf8"' >> /etc/locale.conf +fi +if [ "x$1" == "xgnome" ] || [ "x$1" == "xdevstation" ]; then + systemctl enable gdm +fi diff --git a/scripts/configs-rpi/config.txt b/scripts/configs-rpi/config.txt new file mode 100644 index 0000000..4e1d4a2 --- /dev/null +++ b/scripts/configs-rpi/config.txt @@ -0,0 +1,51 @@ +# For more options and information see +# http://rptl.io/configtxt +# Some settings may impact device functionality. See link above for details + +# Uncomment some or all of these to enable the optional hardware interfaces +#dtparam=i2c_arm=on +#dtparam=i2s=on +#dtparam=spi=on + +# Enable audio (loads snd_bcm2835) +dtparam=audio=on + +# Additional overlays and parameters are documented +# /boot/firmware/overlays/README + +# Automatically load overlays for detected cameras +camera_auto_detect=1 + +# Automatically load overlays for detected DSI displays +display_auto_detect=1 + +# Automatically load initramfs files, if found +auto_initramfs=1 + +# Enable DRM VC4 V3D driver +dtoverlay=vc4-kms-v3d +max_framebuffers=2 + +# Don't have the firmware create an initial video= setting in cmdline.txt. +# Use the kernel's default instead. +disable_fw_kms_setup=1 + +# Run in 64-bit mode +arm_64bit=1 + +# Disable compensation for displays with overscan +disable_overscan=1 + +# Run as fast as firmware / board allows +arm_boost=1 + +[cm4] +# Enable host mode on the 2711 built-in XHCI USB controller. +# This line should be removed if the legacy DWC2 controller is required +# (e.g. for USB device mode) or if USB support is not required. +otg_mode=1 + +[cm5] +dtoverlay=dwc2,dr_mode=host + +[all] diff --git a/scripts/configs-rpi/extend-root.sh b/scripts/configs-rpi/extend-root.sh new file mode 100755 index 0000000..1e23a3e --- /dev/null +++ b/scripts/configs-rpi/extend-root.sh @@ -0,0 +1,49 @@ +#!/bin/bash +# chkconfig: - 99 10 +# description: extend root + +set -e + +extend_root(){ + ROOT_PART="$(findmnt / -o source -n)" # /dev/mmcblk0p3 + ROOT_DEV="/dev/$(lsblk -no pkname "$ROOT_PART")" # /dev/mmcblk0 + PART_NUM="$(echo "$ROOT_PART" | grep -o "[[:digit:]]*$")" # 3 + + PART_INFO=$(parted "$ROOT_DEV" -ms unit s p) + # BYT; + # /dev/mmcblk0:31116288s:sd/mmc:512:512:msdos:SD SC16G:; + # 1:8192s:593919s:585728s:fat16::boot, lba; + # 2:593920s:1593343s:999424s:linux-swap(v1)::; + # 3:1593344s:31116287s:29522944s:ext4::; + LAST_PART_NUM=$(echo "$PART_INFO" | tail -n 1 | cut -f 1 -d:) # 3 + PART_START=$(echo "$PART_INFO" | grep "^${PART_NUM}" | cut -f 2 -d: | sed 's/[^0-9]//g') # 1593344 + PART_END=$(echo "$PART_INFO" | grep "^${PART_NUM}" | cut -f 3 -d: | sed 's/[^0-9]//g') # XXXX < 31116288 + ROOT_END=$(echo "$PART_INFO" | grep "^/dev"| cut -f 2 -d: | sed 's/[^0-9]//g') # 31116288 + ((ROOT_END--)) # 31116287 + + if [ $PART_END -lt $ROOT_END ]; then + fdisk "$ROOT_DEV" <> /var/log/extend-root.log + else + echo "Already the largest! Do not need extend any more!" >> /var/log/extend-root.log + fi + return 0 +} + +if extend_root; then + rm -f /etc/rc.d/init.d/extend-root.sh +else + echo "Fail to root!" >> /var/log/extend-root.log +fi diff --git a/scripts/configs-rpi/hosts b/scripts/configs-rpi/hosts new file mode 100644 index 0000000..8329024 --- /dev/null +++ b/scripts/configs-rpi/hosts @@ -0,0 +1,2 @@ +127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 +::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 \ No newline at end of file diff --git a/scripts/configs-rpi/ifcfg-eth0 b/scripts/configs-rpi/ifcfg-eth0 new file mode 120000 index 0000000..2e31118 --- /dev/null +++ b/scripts/configs-rpi/ifcfg-eth0 @@ -0,0 +1 @@ +../configs/ifcfg-eth0 \ No newline at end of file diff --git a/scripts/configs-rpi/resolv.conf b/scripts/configs-rpi/resolv.conf new file mode 120000 index 0000000..9896311 --- /dev/null +++ b/scripts/configs-rpi/resolv.conf @@ -0,0 +1 @@ +../configs/resolv.conf \ No newline at end of file diff --git a/scripts/configs-rpi/rpmlist b/scripts/configs-rpi/rpmlist new file mode 100644 index 0000000..2056076 --- /dev/null +++ b/scripts/configs-rpi/rpmlist @@ -0,0 +1,27 @@ +dnf +alsa-utils +haveged +wpa_supplicant +vim +net-tools +iproute +iputils +NetworkManager +NetworkManager-wifi +NetworkManager-wwan +NetworkManager-bluetooth +NetworkManager-ovs +NetworkManager-ppp +openssh-server +openssh-clients +passwd +hostname +bluez +pulseaudio-module-bluetooth +parted +raspberrypi-firmware +raspberrypi-bluetooth +sudo +bc +systemd-timesyncd +openEuler-repos diff --git a/scripts/configs-rpi/rpmlist-dde b/scripts/configs-rpi/rpmlist-dde new file mode 100644 index 0000000..263ee27 --- /dev/null +++ b/scripts/configs-rpi/rpmlist-dde @@ -0,0 +1,30 @@ +dnf +alsa-utils +haveged +wpa_supplicant +vim +net-tools +iproute +iputils +NetworkManager +NetworkManager-wifi +NetworkManager-wwan +NetworkManager-bluetooth +NetworkManager-ovs +NetworkManager-ppp +openssh-server +openssh-clients +passwd +hostname +bluez +pulseaudio-module-bluetooth +parted +raspberrypi-firmware +raspberrypi-bluetooth +sudo +dde +ibus-libpinyin +firefox +bc +systemd-timesyncd +openEuler-repos diff --git a/scripts/configs-rpi/rpmlist-devstation b/scripts/configs-rpi/rpmlist-devstation new file mode 100644 index 0000000..5222f4d --- /dev/null +++ b/scripts/configs-rpi/rpmlist-devstation @@ -0,0 +1,1014 @@ +dnf +alsa-utils +haveged +wpa_supplicant +vim +net-tools +iproute +iputils +NetworkManager +NetworkManager-wifi +NetworkManager-wwan +NetworkManager-bluetooth +NetworkManager-ovs +NetworkManager-ppp +openssh-server +openssh-clients +passwd +hostname +bluez +pulseaudio-module-bluetooth +parted +raspberrypi-firmware +raspberrypi-bluetooth +sudo +bc +systemd-timesyncd +abattis-cantarell-fonts +abseil-cpp +accountsservice +accountsservice-libs +acl +adobe-mappings-cmap +adobe-mappings-cmap-lang +adobe-mappings-pdf +adwaita-cursor-theme +adwaita-icon-theme +alsa-lib +appstream +aspell +atk +at-spi2-atk +at-spi2-core +attr +audit-libs +autoconf +automake +avahi-glib +avahi-libs +babeltrace +basesystem +bash +binutils +bluez-libs +bolt +brotli +brotli-devel +btrfs-progs +bubblewrap +bullet +bzip2 +bzip2-devel +ca-certificates +cairo +cairo-devel +cairo-gobject +cairo-gobject-devel +cdparanoia-libs +checkpolicy +chkconfig +cmake-filesystem +code +colord +colord-gtk +colord-libs +color-filesystem +containers-common +container-selinux +copy-jdk-configs +coreutils +cpio +cpp +cpp-gpgme +cracklib +criu +cronie +crontabs +crun +crypto-policies +crypto-policies-scripts +cryptsetup +CUnit +CUnit-devel +cups-libs +cups-pk-helper +curl +cxl-libs +cyrus-sasl-lib +daxctl-libs +dbus +dbus-c++ +dbus-common +dbus-daemon +dbus-glib +dbus-libs +dbus-tools +dbus-x11 +dconf +dejavu-fonts +desktop-file-utils +device-mapper +device-mapper-event +devstation-config +dhcp +diffutils +dnf-data +dnf-plugins-core +dosfstools +double-conversion +dracut +duktape +e2fsprogs +e2fsprogs-help +efibootmgr +efi-filesystem +efi-srpm-macros +efivar-libs +efl +elfutils-default-yama-scope +elfutils-libelf +elfutils-libs +emacs-filesystem +enchant2 +epiphany-runtime +evolution-data-server +evolution-data-server-langpacks +exempi +exiv2 +expat +ffmpeg +ffmpeg-libs +fftw-libs-single +file +file-libs +filesystem +findutils +firefox +firewalld +flac +flatpak +fontconfig +fontconfig-devel +fonts-filesystem +freeglut +freerdp +freetype +freetype-devel +fribidi +fribidi-devel +fuse +fuse3 +fuse3-help +fuse-common +fuse-help +fuse-overlayfs +fwupd +gawk +gc +gcab +gcc +gcc-gdb-plugin +gcr +gcr4 +gcr4-base +gcr-base +gd +gdb +gdb-headless +gdbm +gdisk +gdk-pixbuf2 +gdk-pixbuf2-devel +gdk-pixbuf2-modules +gdm +geoclue2 +geocode-glib +geocode-glib-devel +gettext +ghostscript +giflib +git +git-core +gjs +glib2 +glib2-devel +glibc +glibc-common +glibc-devel +glibmm24 +glib-networking +gmock +gmp +gnome-autoar +gnome-bluetooth +gnome-color-manager +gnome-control-center +gnome-control-center-filesystem +gnome-desktop3 +gnome-keyring +gnome-keyring-pam +gnome-menus +gnome-online-accounts +gnome-remote-desktop +gnome-session +gnome-settings-daemon +gnome-shell +gnome-software +gnome-terminal +gnome-tour +gnupg2 +gnutls +gobject-introspection +gobject-introspection-devel +google-droid-sans-fonts +google-noto-fonts-common +google-noto-sans-arabic-vf-fonts +google-noto-sans-armenian-vf-fonts +google-noto-sans-bengali-vf-fonts +google-noto-sans-canadian-aboriginal-vf-fonts +google-noto-sans-cherokee-vf-fonts +google-noto-sans-devanagari-vf-fonts +google-noto-sans-ethiopic-vf-fonts +google-noto-sans-georgian-vf-fonts +google-noto-sans-hebrew-vf-fonts +google-noto-sans-kannada-vf-fonts +google-noto-sans-khmer-vf-fonts +google-noto-sans-lao-vf-fonts +google-noto-sans-math-fonts +google-noto-sans-mono-vf-fonts +google-noto-sans-sinhala-vf-fonts +google-noto-sans-symbols2-fonts +google-noto-sans-symbols-vf-fonts +google-noto-sans-tamil-vf-fonts +google-noto-sans-thaana-vf-fonts +google-noto-sans-thai-vf-fonts +google-noto-sans-vf-fonts +google-noto-serif-armenian-vf-fonts +google-noto-serif-ethiopic-vf-fonts +google-noto-serif-georgian-vf-fonts +google-noto-serif-gujarati-vf-fonts +google-noto-serif-gurmukhi-vf-fonts +google-noto-serif-hebrew-vf-fonts +google-noto-serif-kannada-vf-fonts +google-noto-serif-khmer-vf-fonts +google-noto-serif-lao-vf-fonts +google-noto-serif-sinhala-vf-fonts +google-noto-serif-tamil-vf-fonts +google-noto-serif-thai-vf-fonts +google-noto-serif-vf-fonts +gpgme +gpm-libs +graphene +graphene-devel +graphite2 +graphite2-devel +graphviz +graphviz-devel +grep +groff-base +grub2-common +grub2-efi-aa64 +grub2-tools +grub2-tools-extra +grub2-tools-minimal +grubby +gsettings-desktop-schemas +gsm +gsound +gssdp +gst-editing-services +gstreamer1 +gstreamer1-plugins-bad-free +gstreamer1-plugins-base +gstreamer1-plugins-good +gtest +gtest-devel +gtk2 +gtk3 +gtk4 +gtk4-devel +gtk-update-icon-cache +guile +gupnp +gupnp-av +gupnp-dlna +gupnp-igd +gvfs +gvfs-client +gzip +harfbuzz +harfbuzz-devel +hicolor-icon-theme +highcontrast-icon-theme +hunspell +hunspell-en +hwdata +hyphen +ibus +ibus-libpinyin +ibus-libs +iio-sensor-proxy +ima-evm-utils-libs +info +inih +iniparser +initscripts +initscripts-service +ipcalc +ipset +ipset-libs +iptables +iptables-help +iptables-libs +iptables-nft +iso-codes +iw +jack-audio-connection-kit +jansson +java-21-openjdk +java-21-openjdk-devel +java-21-openjdk-headless +javapackages-filesystem +jbig2dec +jbigkit-libs +jq +jsc4.1 +jsc5.0 +json-c +json-glib +json-glib-devel +kbd +kbd-legacy +kbd-misc +keyutils-libs +kmod +kmod-libs +kpartx +krb5-libs +lame +lcms2 +less +libacl +libadwaita +libadwaita-devel +libaio +libaom +libappstream-glib +libarchive +libargon2 +libass +libassuan +libasyncns +libatasmart +libatomic +libavdevice +libblkid +libblockdev +libbluray +libbpf +libbytesize +libcanberra +libcanberra-gtk3 +libcap +libcap-ng +libcbor +libcdio +libcdio-paranoia +libcloudproviders +libcomps +libconfig +libcurl +libdatrie +libdatrie-devel +libdav1d +libdazzle +libdb +libdbusmenu +libdbusmenu-gtk3 +libdmx +libdnf +libdrm +libedit +libepoxy +libepoxy-devel +liberation-fonts +libev +libevdev +libevent +libexif +libfdisk +libffado +libffi +libffi-devel +libfontenc +libgcc +libgcrypt +libgdata +libgee +libgexiv2 +libglvnd +libglvnd-core-devel +libglvnd-devel +libglvnd-egl +libglvnd-gles +libglvnd-glx +libglvnd-opengl +libgnomekbd +libgomp +libgpg-error +libgphoto2 +libgsf +libgtop2 +libgudev +libgusb +libgweather +libgweather-devel +libgxps +libhandy +libical +libICE +libicu +libicu-devel +libidn +libidn2 +libiec61883 +libiec61883-help +libijs +libimagequant +libimobiledevice +libinput +libiptcdata +libjcat +libjpeg-turbo +libjpeg-turbo-devel +libkcapi +libksba +libldac +libldb +libmediaart +libmnl +libmodplug +libmodulemd +libmount +libmpc +libmtp +libndp +libnet +libnetfilter_conntrack +libnfnetlink +libnftnl +libnghttp2 +libnghttp2-devel +libnice +libnl3 +libnma +libnotify +libnsl2 +libnvme +libogg +libosinfo +libpaper +libpcap +libpciaccess +libpfm +libpinyin +libpipeline +libplist +libpng +libpng-devel +libportal +libproxy +libpsl +libpsl-devel +libpwquality +LibRaw +libraw1394 +libraw1394-help +librepo +libreport-filesystem +librsvg2 +libsamplerate +libseccomp +libsecret +libselinux +libselinux-devel +libsemanage +libsepol +libsepol-devel +libshout +libsigc++20 +libsigsegv +libslirp +libSM +libsmartcols +libsmbclient +libsndfile +libsolv +libsoup +libsoup3 +libsoup3-devel +libspectre +libssh +libstdc++ +libstemmer +libsysprof-ui +libtalloc +libtasn1 +libtdb +libtevent +libthai +libthai-devel +libtheora +libtiff +libtiff-devel +libtirpc +libtool +libtool-ltdl +libtraceevent +libtracker-sparql3 +libudisks2 +libunistring +libunwind +libusbmuxd +libusbx +libuser +libutempter +libuuid +libv4l +libva +libvdpau +libverto +libvisual +libvncserver +libvorbis +libvpx +libwacom +libwacom-data +libwbclient +libwebp +libwinpr +libwpe +libX11 +libX11-devel +libXau +libXau-devel +libXaw +libxcb +libxcb-devel +libXcomposite +libxcrypt +libxcrypt-devel +libXcursor +libXcursor-devel +libxcvt +libXdamage +libXdamage-devel +libXdmcp +libXext +libXext-devel +libXfixes +libXfixes-devel +libXfont2 +libXft +libXft-devel +libXi +libXi-devel +libXinerama +libXinerama-devel +libxkbcommon +libxkbcommon-devel +libxkbcommon-x11 +libxkbfile +libxklavier +libxml2 +libxml++ +libxml2-devel +libxmlb +libXmu +libXpm +libXrandr +libXrandr-devel +libXrender +libXrender-devel +libXScrnSaver +libxshmfence +libxslt +libXt +libXtst +libXv +libXxf86dga +libXxf86vm +libyaml +lilv-libs +llvm-libs +lmdb +lockdev +logrotate +low-memory-monitor +lua +luajit +lua-posix +lvm2 +lvm2-dbusd +lvm2-help +lz4 +lzo +m4 +make +malcontent-libs +man-db +mcpp +mdadm +mesa-demos +mesa-dri-drivers +mesa-filesystem +mesa-libEGL +mesa-libgbm +mesa-libGL +mesa-libglapi +mesa-libGLU +mobile-broadband-provider-info +ModemManager-glib +mokutil +mozilla-filesystem +mozjs102 +mpfr +mpg123-libs +mtdev +multipath-tools +mutter +nautilus +ncurses +ncurses-base +ncurses-libs +ndctl +ndctl-libs +nettle +NetworkManager-libnm +newt +nftables +nm-connection-editor +npth +nspr +nss +nss-softokn +nss-util +ntfs-3g +ocl-icd +oniguruma +openal-soft +opencore-amr +OpenCSD +openEuler-gpg-keys +openEuler-logos +openEuler-release +openEuler-rpm-config +openjpeg2 +openldap +openssh +openssl +openssl-libs +openssl-pkcs11 +opus +orc +osinfo-db +osinfo-db-tools +os-prober +ostree +p11-kit +p11-kit-trust +PackageKit +pam +pango +pango-devel +pciutils +pcre2 +pcre2-devel +pcre +perf +perl +perl-Algorithm-Diff +perl-Archive-Tar +perl-autodie +perl-B-Debug +perl-bignum +perl-Carp +perl-Compress-Raw-Bzip2 +perl-Compress-Raw-Zlib +perl-Config-Perl-V +perl-constant +perl-CPAN-Meta +perl-CPAN-Meta-Requirements +perl-CPAN-Meta-YAML +perl-Data-Dumper +perl-devel +perl-Devel-PPPort +perl-Digest +perl-Digest-MD5 +perl-Digest-SHA +perl-Encode +perl-Encode-devel +perl-Encode-Locale +perl-Env +perl-Error +perl-experimental +perl-Exporter +perl-ExtUtils-Command +perl-ExtUtils-Install +perl-ExtUtils-MakeMaker +perl-ExtUtils-Manifest +perl-ExtUtils-ParseXS +perl-File-Fetch +perl-File-Path +perl-File-Temp +perl-Filter +perl-Filter-Simple +perl-Getopt-Long +perl-Git +perl-HTTP-Tiny +perl-IO-Compress +perl-IO-Socket-IP +perl-IO-Socket-SSL +perl-IPC-Cmd +perl-IPC-System-Simple +perl-IPC-SysV +perl-JSON-PP +perl-libnet +perl-libs +perl-Locale-Codes +perl-Locale-Maketext +perl-Math-BigInt +perl-Math-BigInt-FastCalc +perl-MIME-Base64 +perl-Module-CoreList +perl-Module-Load +perl-Module-Load-Conditional +perl-Module-Metadata +perl-Mozilla-CA +perl-Net-SSLeay +perl-Params-Check +perl-parent +perl-PathTools +perl-perlfaq +perl-PerlIO-via-QuotedPrint +perl-Perl-OSType +perl-Pod-Checker +perl-Pod-Escapes +perl-podlators +perl-Pod-Parser +perl-Pod-Perldoc +perl-Pod-Simple +perl-Pod-Usage +perl-Scalar-List-Utils +perl-Socket +perl-Storable +perl-Sys-Syslog +perl-Term-ANSIColor +perl-Term-Cap +perl-TermReadKey +perl-Test-Harness +perl-Test-Simple +perl-Text-Balanced +perl-Text-Diff +perl-Text-ParseWords +perl-Text-Tabs+Wrap +perl-Thread-Queue +perl-threads +perl-threads-shared +perl-Time-HiRes +perl-Time-Local +perl-Unicode-Collate +perl-Unicode-Normalize +perl-URI +perl-version +pigz +pinentry +pipewire +pipewire-gstreamer +pipewire-libs +pixman +pixman-devel +pkgconf +pngquant +policycoreutils +polkit +polkit-devel +polkit-help +polkit-libs +polkit-pkla-compat +poppler +poppler-cpp +poppler-data +poppler-glib +popt +procps-ng +protobuf +protobuf-c +protobuf-compiler +psmisc +publicsuffix-list +pulseaudio +pulseaudio-libs +pulseaudio-libs-glib2 +python3 +python3-cairo +python3-dateutil +python3-dbus +python3-distro +python3-dnf +python3-dnf-plugins-core +python3-firewall +python3-gobject +python3-gobject-base +python3-gpgme +python3-hawkey +python3-iniconfig +python3-libcomps +python3-libdnf +python3-mako +python3-markdown +python3-markupsafe +python3-nftables +python3-packaging +python3-pip +python3-pluggy +python3-pyparsing +python3-pyqt5-sip +python3-pytest +python3-pyudev +python3-qt5 +python3-qt5-base +python3-rpm +python3-setuptools +python3-six +python3-unbound +python-pip-wheel +python-qt5-rpm-macros +python-setuptools +qt5-qtbase +qt5-qtbase-common +qt5-qtbase-gui +qt5-qtconnectivity +qt5-qtdeclarative +qt5-qtenginio +qt5-qtlocation +qt5-qtmultimedia +qt5-qtsensors +qt5-qtserialport +qt5-qtsvg +qt5-qttools-common +qt5-qttools-libs-designer +qt5-qttools-libs-help +qt5-qtwebchannel +qt5-qtwebsockets +qt5-qtx11extras +qt5-qtxmlpatterns +qt5-srpm-macros +qt-settings +readline +rest +rpm +rpm-libs +rpm-ostree +rpm-ostree-libs +rtkit +rygel +samba-client-libs +samba-common +sbc +SDL +SDL2 +sed +selinux-policy +selinux-policy-targeted +serd +setup +sgml-common +shadow +shadow-subid-devel +shared-mime-info +shim +skopeo +slang +slirp4netns +snapd-glib +sord +sound-theme-freedesktop +soxr +speex +speexdsp +sqlite +sqlite-devel +sratom +srt-libs +startup-notification +switcheroo-control +sysprof +sysprof-cli +sysprof-devel +systemd +systemd-libs +systemd-pam +systemd-udev +systemtap-sdt-devel +taglib +tar +tcl +thin-provisioning-tools +thin-provisioning-tools-help +totem-pl-parser +tpm2-tss +tracker3 +tracker3-miners +trousers +twolame +tzdata +tzdata-java +uchardet +udisks2 +unbound-libs +upower +urw-base35-bookman-fonts +urw-base35-c059-fonts +urw-base35-d050000l-fonts +urw-base35-fonts +urw-base35-fonts-common +urw-base35-gothic-fonts +urw-base35-nimbus-mono-ps-fonts +urw-base35-nimbus-roman-fonts +urw-base35-nimbus-sans-fonts +urw-base35-p052-fonts +urw-base35-standard-symbols-ps-fonts +urw-base35-z003-fonts +usbmuxd +userspace-rcu +util-linux +util-linux-devel +vala +vala-devel +vid.stab +vim-common +vim-enhanced +vim-filesystem +vim-minimal +vo-amrwbenc +volume_key +vte291 +wavpack +wavpack-help +wayland +wayland-devel +webkit2gtk3 +webkit2gtk3-jsc +webkit2gtk4.1 +webkit2gtk5.0 +webp-pixbuf-loader +which +wireless-regdb +woff2 +wpebackend-fdo +wqy-zenhei-fonts +x264-libs +x265 +xcb-util +xcb-util-image +xcb-util-keysyms +xcb-util-renderutil +xcb-util-wm +xdg-dbus-proxy +xdg-desktop-portal +xdg-desktop-portal-gnome +xdg-desktop-portal-gtk +xdg-user-dirs +xdg-user-dirs-gtk +xdg-utils +xfsprogs +xfsprogs-xfs_scrub +xkeyboard-config +xorg-x11-drv-libinput +xorg-x11-fonts +xorg-x11-fonts-others +xorg-x11-font-utils +xorg-x11-proto-devel +xorg-x11-server +xorg-x11-server-common +xorg-x11-server-utils +xorg-x11-server-Xwayland +xorg-x11-utils +xorg-x11-xauth +xorg-x11-xinit +xorg-x11-xkb-utils +xvidcore +xz +xz-devel +xz-libs +yajl +yum +zenity +zimg +zip +zlib +zlib-devel +zstd +zvbi +openEuler-repos diff --git a/scripts/configs-rpi/rpmlist-devstation-24.03-LTS-SP2 b/scripts/configs-rpi/rpmlist-devstation-24.03-LTS-SP2 new file mode 100644 index 0000000..ef32d4a --- /dev/null +++ b/scripts/configs-rpi/rpmlist-devstation-24.03-LTS-SP2 @@ -0,0 +1,1280 @@ +dnf +alsa-utils +haveged +wpa_supplicant +vim +net-tools +iproute +iputils +NetworkManager +NetworkManager-wifi +NetworkManager-wwan +NetworkManager-bluetooth +NetworkManager-ovs +NetworkManager-ppp +openssh-server +openssh-clients +passwd +hostname +bluez +pulseaudio-module-bluetooth +parted +raspberrypi-firmware +raspberrypi-bluetooth +sudo +bc +systemd-timesyncd +abattis-cantarell-fonts +abseil-cpp +accountsservice +accountsservice-libs +acl +adcli +adobe-mappings-cmap +adobe-mappings-cmap-lang +adobe-mappings-pdf +adwaita-cursor-theme +adwaita-icon-theme +adwaita-qt5 +alsa-lib +ansible +appstream +aspell +atk +atkmm +at-spi2-atk +at-spi2-core +attr +audit +audit-libs +authselect +autoconf +autogen +automake +avahi-glib +avahi-libs +babeltrace +basesystem +bash +bind +bind-dnssec-doc +bind-dnssec-utils +bind-libs +bind-license +bind-utils +binutils +bluez-libs +bolt +boost-iostreams +brotli +brotli-devel +btrfs-progs +bubblewrap +bullet +bzip2 +bzip2-devel +ca-certificates +cairo +cairo-devel +cairo-gobject +cairo-gobject-devel +cairomm +c-ares +ccid +cdparanoia-libs +checkpolicy +chkconfig +chrony +cmake +cmake-data +cmake-filesystem +cmake-rpm-macros +colord +colord-gtk +colord-libs +color-filesystem +compat-openssl11-libs +containers-common +container-selinux +copy-jdk-configs +coreutils +cpio +cpp +cpp-gpgme +cracklib +criu +cronie +crontabs +crun +crypto-policies +crypto-policies-scripts +cryptsetup +CUnit +CUnit-devel +cups-libs +cups-pk-helper +curl +cxl-libs +cyrus-sasl +cyrus-sasl-lib +daxctl-libs +dbus +dbus-c++ +dbus-common +dbus-daemon +dbus-glib +dbus-libs +dbus-tools +dbus-x11 +dconf +dejavu-fonts +desktop-file-utils +device-mapper +device-mapper-event +devstation-config +dhcp +diffutils +ding-libs +dmidecode +dnf-data +dnf-plugins-core +docbook-dtds +dosfstools +double-conversion +dracut +dracut-config-generic +dracut-config-rescue +dracut-live +dracut-network +dracut-squash +duktape +e2fsprogs +e2fsprogs-help +efibootmgr +efi-filesystem +efi-srpm-macros +efivar-libs +efl +elfutils-debuginfod-client +elfutils-default-yama-scope +elfutils-libelf +elfutils-libs +emacs-filesystem +enchant2 +epiphany-runtime +epkg +ethtool +euler-copilot-desktop +euler-copilot-shell +evolution-data-server +evolution-data-server-langpacks +exempi +exiv2 +expat +ffmpeg +ffmpeg-libs +fftw-libs-single +file +file-libs +filesystem +findutils +fipscheck +firefox +firewalld +flac +flatpak +fontconfig +fontconfig-devel +fonts-filesystem +freeglut +freerdp +freetype +freetype-devel +fribidi +fribidi-devel +fuse +fuse3 +fuse3-help +fuse-common +fuse-help +fuse-overlayfs +fwupd +gawk +gc +gcab +gcc +gcc-c++ +gcc-gdb-plugin +gcr +gcr4 +gcr4-base +gcr-base +gd +gdb +gdb-headless +gdbm +gdisk +gdk-pixbuf2 +gdk-pixbuf2-devel +gdk-pixbuf2-modules +gdm +geoclue2 +geocode-glib +geocode-glib-devel +gettext +ghostscript +giflib +git +git-core +gjs +glib2 +glib2-devel +glibc +glibc-common +glibc-devel +glibmm24 +glibmm24-help +glib-networking +gmock +gmp +gnome-autoar +gnome-bluetooth +gnome-color-manager +gnome-control-center +gnome-control-center-filesystem +gnome-desktop3 +gnome-doc-utils +gnome-doc-utils-stylesheets +gnome-keyring +gnome-keyring-pam +gnome-menus +gnome-online-accounts +gnome-remote-desktop +gnome-session +gnome-settings-daemon +gnome-shell +gnome-shell-extension-dash-to-dock +gnome-shell-extensions +gnome-software +gnome-terminal +gnome-tour +gnome-user-docs +gnupg2 +gnutls +gobject-introspection +gobject-introspection-devel +google-droid-sans-fonts +google-noto-fonts-common +google-noto-sans-arabic-vf-fonts +google-noto-sans-armenian-vf-fonts +google-noto-sans-bengali-vf-fonts +google-noto-sans-canadian-aboriginal-vf-fonts +google-noto-sans-cherokee-vf-fonts +google-noto-sans-devanagari-vf-fonts +google-noto-sans-ethiopic-vf-fonts +google-noto-sans-georgian-vf-fonts +google-noto-sans-hebrew-vf-fonts +google-noto-sans-kannada-vf-fonts +google-noto-sans-khmer-vf-fonts +google-noto-sans-lao-vf-fonts +google-noto-sans-math-fonts +google-noto-sans-mono-vf-fonts +google-noto-sans-sinhala-vf-fonts +google-noto-sans-symbols2-fonts +google-noto-sans-symbols-vf-fonts +google-noto-sans-tamil-vf-fonts +google-noto-sans-thaana-vf-fonts +google-noto-sans-thai-vf-fonts +google-noto-sans-vf-fonts +google-noto-serif-armenian-vf-fonts +google-noto-serif-ethiopic-vf-fonts +google-noto-serif-georgian-vf-fonts +google-noto-serif-gujarati-vf-fonts +google-noto-serif-gurmukhi-vf-fonts +google-noto-serif-hebrew-vf-fonts +google-noto-serif-kannada-vf-fonts +google-noto-serif-khmer-vf-fonts +google-noto-serif-lao-vf-fonts +google-noto-serif-sinhala-vf-fonts +google-noto-serif-tamil-vf-fonts +google-noto-serif-thai-vf-fonts +google-noto-serif-vf-fonts +gpgme +graphene +graphene-devel +graphite2 +graphite2-devel +graphviz +graphviz-devel +grep +groff-base +grub2-common +grub2-efi-aa64 +grub2-efi-aa64-cdboot +grub2-tools +grub2-tools-extra +grub2-tools-minimal +grubby +gsettings-desktop-schemas +gsm +gsound +gssdp +gst-editing-services +gstreamer1 +gstreamer1-plugins-bad-free +gstreamer1-plugins-base +gstreamer1-plugins-good +gstreamer1-plugins-good-qt +gtest +gtest-devel +gtk2 +gtk3 +gtk4 +gtk4-devel +gtkmm30 +gtk-update-icon-cache +guile +gupnp +gupnp-av +gupnp-dlna +gupnp-igd +gvfs +gvfs-client +gzip +harfbuzz +harfbuzz-devel +hdparm +hicolor-icon-theme +highcontrast-icon-theme +hunspell +hunspell-en +hwdata +hyphen +ibus +ibus-libpinyin +ibus-libs +iio-sensor-proxy +ima-evm-utils-libs +info +inih +iniparser +initscripts +initscripts-service +ipcalc +ipmitool +iprutils +ipset +ipset-libs +iptables +iptables-help +iptables-libs +iptables-nft +irqbalance +iso-codes +itstool +iw +jack-audio-connection-kit +jansson +java-21-openjdk +java-21-openjdk-devel +java-21-openjdk-headless +javapackages-filesystem +jbig2dec +jbigkit-libs +jitterentropy-library +jq +jsc4.1 +jsc5.0 +json-c +jsoncpp +json-glib +json-glib-devel +kbd +kbd-legacy +kbd-misc +kexec-tools +keyutils-libs +kf5-kcalendarcore +kf5-kcalendarcore-devel +kmod +kmod-libs +kpartx +krb5-libs +lame +lcms2 +less +libacl +libadwaita +libadwaita-devel +libadwaita-qt5 +libaio +libaom +libappstream-glib +libarchive +libargon2 +libass +libassuan +libasyncns +libatasmart +libatomic +libavdevice +libblkid +libblockdev +libbluray +libbpf +libbytesize +libcanberra +libcanberra-gtk3 +libcap +libcap-ng +libcbor +libcdio +libcdio-paranoia +libcloudproviders +libcomps +libconfig +libcurl +libdaemon +libdatrie +libdatrie-devel +libdav1d +libdazzle +libdb +libdbusmenu +libdbusmenu-gtk3 +libdmx +libdnf +libdrm +libdrm-devel +libedit +libepoxy +libepoxy-devel +liberation-fonts +libestr +libev +libevdev +libevent +libexif +libfastjson +libfdisk +libffado +libffi +libffi-devel +libfontenc +libfontenc-devel +libgcc +libgcrypt +libgdata +libgee +libgexiv2 +libglvnd +libglvnd-core-devel +libglvnd-devel +libglvnd-egl +libglvnd-gles +libglvnd-glx +libglvnd-opengl +libgnomekbd +libgomp +libgpg-error +libgphoto2 +libgsf +libgtop2 +libgudev +libgusb +libgweather +libgweather-devel +libgxps +libhandy +libical +libical-devel +libICE +libicu +libicu-devel +libidn +libidn2 +libiec61883 +libiec61883-help +libijs +libimagequant +libimobiledevice +libinput +libipa_hbac +libiptcdata +libjcat +libjpeg-turbo +libjpeg-turbo-devel +libkcapi +libksba +libldac +libldb +libmediaart +libmetalink +libmnl +libmodplug +libmodulemd +libmount +libmpc +libmspack +libmtp +libndp +libnet +libnetfilter_conntrack +libnfnetlink +libnfsidmap +libnftnl +libnghttp2 +libnghttp2-devel +libnice +libnl3 +libnma +libnotify +libnsl2 +libnvme +libogg +libosinfo +libpaper +libpcap +libpciaccess +libpciaccess-devel +libpfm +libpinyin +libpipeline +libplist +libpng +libpng-devel +libportal +libproxy +libpsl +libpsl-devel +libpwquality +LibRaw +libraw1394 +libraw1394-help +librepo +libreport-filesystem +librsvg2 +libsamplerate +libseccomp +libsecret +libselinux +libselinux-devel +libsemanage +libsepol +libsepol-devel +libshout +libsigc++20 +libsigc++20-help +libsigsegv +libslirp +libSM +libsmartcols +libsmbclient +libsndfile +libsodium +libsolv +libsoup +libsoup3 +libsoup3-devel +libspectre +libssh +libsss_autofs +libsss_certmap +libsss_idmap +libsss_nss_idmap +libsss_sudo +libstdc++ +libstdc++-devel +libstemmer +libsysprof-ui +libtalloc +libtasn1 +libtdb +libteam +libtevent +libthai +libthai-devel +libtheora +libtiff +libtiff-devel +libtirpc +libtool +libtool-ltdl +libtraceevent +libtracker-sparql3 +libudisks2 +libunistring +libunwind +libusbmuxd +libusbx +libuser +libutempter +libuuid +libuv +libv4l +libva +libvdpau +libverto +libvisual +libvncserver +libvorbis +libvpx +libwacom +libwacom-data +libwbclient +libwebp +libwinpr +libwpe +libX11 +libX11-devel +libXau +libXau-devel +libxcb +libxcb-devel +libXcomposite +libxcrypt +libxcrypt-devel +libXcursor +libXcursor-devel +libxcvt +libXdamage +libXdamage-devel +libXdmcp +libXext +libXext-devel +libXfixes +libXfixes-devel +libXfont2 +libXfont2-devel +libXft +libXft-devel +libXi +libXi-devel +libXinerama +libXinerama-devel +libxkbcommon +libxkbcommon-devel +libxkbcommon-x11 +libxkbfile +libxklavier +libxml2 +libxml++ +libxml2-devel +libxmlb +libXmu +libXpm +libXrandr +libXrandr-devel +libXrender +libXrender-devel +libXScrnSaver +libxshmfence +libxslt +libXt +libXtst +libXv +libXxf86dga +libXxf86vm +libyaml +lilv-libs +llvm-libs +lmdb +lm_sensors +lockdev +logrotate +low-memory-monitor +lshw +lsscsi +lua +luajit +lua-posix +lvm2 +lvm2-dbusd +lvm2-help +lz4 +lzo +m4 +make +malcontent-libs +mallard-rng +man-db +mariadb-connector-c +mcpp +mcstrans +mdadm +mesa-demos +mesa-dri-drivers +mesa-filesystem +mesa-libEGL +mesa-libEGL-devel +mesa-libgbm +mesa-libGL +mesa-libglapi +mesa-libGL-devel +mesa-libGLU +mesa-vulkan-drivers +mobile-broadband-provider-info +ModemManager-glib +mokutil +mozilla-filesystem +mozjs102 +mpfr +mpg123-libs +mtdev +multipath-tools +mutter +nautilus +ncurses +ncurses-base +ncurses-libs +ndctl +ndctl-libs +net-snmp +net-snmp-libs +nettle +NetworkManager-config-server +NetworkManager-libnm +newt +nftables +nm-connection-editor +nodejs +nodejs-docs +nodejs-full-i18n +nodejs-libs +nodejs-packaging +npm +npth +nspr +nss +nss-softokn +nss-util +ntfs-3g +ntp +ntpstat +numactl-libs +ocl-icd +oeDevPlugin +oedp +oegitext +oniguruma +openal-soft +opencore-amr +OpenCSD +openEuler-gpg-keys +openEuler-latest-release +openEuler-logos +openEuler-release +openEuler-rpm-config +openjpeg2 +openldap +opensc +openssh +openssl +openssl-libs +openssl-pkcs11 +open-vm-tools +open-vm-tools-desktop +opus +orc +osinfo-db +osinfo-db-tools +os-prober +ostree +p11-kit +p11-kit-trust +PackageKit +pam +pango +pango-devel +pangomm +pciutils +pcre2 +pcre2-devel +pcre +pcsc-lite +perf +perl +perl-Algorithm-Diff +perl-Archive-Tar +perl-autodie +perl-B-Debug +perl-bignum +perl-Carp +perl-Compress-Raw-Bzip2 +perl-Compress-Raw-Zlib +perl-Config-Perl-V +perl-constant +perl-CPAN-Meta +perl-CPAN-Meta-Requirements +perl-CPAN-Meta-YAML +perl-Data-Dumper +perl-devel +perl-Devel-PPPort +perl-Digest +perl-Digest-MD5 +perl-Digest-SHA +perl-Encode +perl-Encode-devel +perl-Encode-Locale +perl-Env +perl-Error +perl-experimental +perl-Exporter +perl-ExtUtils-Command +perl-ExtUtils-Install +perl-ExtUtils-MakeMaker +perl-ExtUtils-Manifest +perl-ExtUtils-ParseXS +perl-File-Fetch +perl-File-Path +perl-File-Temp +perl-Filter +perl-Filter-Simple +perl-Getopt-Long +perl-Git +perl-HTTP-Tiny +perl-IO-Compress +perl-IO-Socket-IP +perl-IO-Socket-SSL +perl-IPC-Cmd +perl-IPC-System-Simple +perl-IPC-SysV +perl-JSON-PP +perl-libnet +perl-libs +perl-Locale-Codes +perl-Locale-Maketext +perl-Math-BigInt +perl-Math-BigInt-FastCalc +perl-MIME-Base64 +perl-Module-CoreList +perl-Module-Load +perl-Module-Load-Conditional +perl-Module-Metadata +perl-Mozilla-CA +perl-Net-SSLeay +perl-Params-Check +perl-parent +perl-PathTools +perl-perlfaq +perl-PerlIO-via-QuotedPrint +perl-Perl-OSType +perl-Pod-Checker +perl-Pod-Escapes +perl-podlators +perl-Pod-Parser +perl-Pod-Perldoc +perl-Pod-Simple +perl-Pod-Usage +perl-Scalar-List-Utils +perl-Socket +perl-Storable +perl-Sys-Syslog +perl-Term-ANSIColor +perl-Term-Cap +perl-TermReadKey +perl-Test-Harness +perl-Test-Simple +perl-Text-Balanced +perl-Text-Diff +perl-Text-ParseWords +perl-Text-Tabs+Wrap +perl-Thread-Queue +perl-threads +perl-threads-shared +perl-Time-HiRes +perl-Time-Local +perl-Unicode-Collate +perl-Unicode-Normalize +perl-URI +perl-version +pigz +pinentry +pipewire +pipewire-gstreamer +pipewire-libs +pixman +pixman-devel +pkgconf +pngquant +policycoreutils +policycoreutils-python-utils +polkit +polkit-devel +polkit-help +polkit-libs +polkit-pkla-compat +polkit-qt5-1 +polkit-qt5-1-devel +poppler +poppler-cpp +poppler-data +poppler-glib +popt +powertop +procps-ng +protobuf +protobuf-c +protobuf-compiler +psmisc +publicsuffix-list +pulseaudio +pulseaudio-libs +pulseaudio-libs-glib2 +python3 +python3-annotated-types +python3-anyio +python3-audit +python3-babel +python3-bcrypt +python3-cairo +python3-certifi +python3-cffi +python3-click +python3-colorama +python3-configobj +python3-cryptography +python3-dateutil +python3-dbus +python3-decorator +python3-distro +python3-dnf +python3-dnf-plugins-core +python3-dns +python3-dotenv +python3-email-validator +python3-firewall +python3-gobject +python3-gobject-base +python3-gpgme +python3-h11 +python3-hawkey +python3-httpcore +python3-httpx +python3-httpx-sse +python3-idna +python3-importlib-metadata +python3-iniconfig +python3-IPy +python3-jinja2 +python3-jmespath +python3-libcomps +python3-libdnf +python3-libselinux +python3-libsemanage +python3-libxml2 +python3-linux-procfs +python3-lxml +python3-mako +python3-markdown +python3-markdown-it-py +python3-markupsafe +python3-mcp +python3-mdurl +python3-netaddr +python3-nftables +python3-packaging +python3-paramiko +python3-perf +python3-pip +python3-pluggy +python3-ply +python3-policycoreutils +python3-prettytable +python3-pyasn1 +python3-pycparser +python3-pydantic +python3-pydantic-core +python3-pydantic-settings +python3-pygments +python3-pynacl +python3-pyparsing +python3-pyqt5-sip +python3-pytest +python3-pytz +python3-pyudev +python3-pyyaml +python3-qt5 +python3-qt5-base +python3-rich +python3-rpm +python3-schedutils +python3-setools +python3-setuptools +python3-shellingham +python3-six +python3-slip +python3-sniffio +python3-sse-starlette +python3-starlette +python3-typer +python3-typer-cli +python3-typer-slim +python3-typing-extensions +python3-ujson +python3-unbound +python3-uvicorn +python3-wcwidth +python3-zipp +python-pip-wheel +python-qt5-rpm-macros +python-setuptools +qgnomeplatform-qt5 +qt5-qtbase +qt5-qtbase-common +qt5-qtbase-devel +qt5-qtbase-gui +qt5-qtconnectivity +qt5-qtdeclarative +qt5-qtenginio +qt5-qtgraphicaleffects +qt5-qtlocation +qt5-qtmultimedia +qt5-qtquickcontrols2 +qt5-qtsensors +qt5-qtserialport +qt5-qtsvg +qt5-qttools-common +qt5-qttools-libs-designer +qt5-qttools-libs-help +qt5-qtwayland +qt5-qtwebchannel +qt5-qtwebsockets +qt5-qtx11extras +qt5-qtxmlpatterns +qt5-rpm-macros +qt5-srpm-macros +qt-settings +rdma-core +readline +rest +rng-tools +roo-code +rootfiles +rpm +rpm-libs +rpm-ostree +rpm-ostree-libs +rsync +rsyslog +rtkit +rust-cbindgen +rust-ripgrep +rygel +samba-client +samba-client-libs +samba-common +samba-libs +sbc +SDL +SDL2 +security-tool +sed +selinux-policy +selinux-policy-mls +selinux-policy-targeted +serd +setup +sg3_utils +sgml-common +shadow +shadow-subid-devel +shared-mime-info +shim +skopeo +slang +slirp4netns +snapd-glib +snappy +sord +sound-theme-freedesktop +soxr +speex +speexdsp +sqlite +sqlite-devel +squashfs-tools +sratom +srt-libs +sshpass +sssd +sssd-ad +sssd-client +sssd-common +sssd-common-pac +sssd-ipa +sssd-krb5 +sssd-krb5-common +sssd-ldap +sssd-nfs-idmap +sssd-proxy +startup-notification +switcheroo-control +sysfsutils +sysprof +sysprof-cli +sysprof-devel +systemd +systemd-libs +systemd-pam +systemd-udev +systemtap +systemtap-client +systemtap-runtime +systemtap-sdt-devel +taglib +tar +tcl +thin-provisioning-tools +thin-provisioning-tools-help +thunderbird +thunderbird-librnp-rnp +timedatex +totem-pl-parser +tpm2-tss +tracker3 +tracker3-miners +trousers +tuned +twolame +tzdata +tzdata-java +uchardet +udisks2 +unbound-libs +unzip +upower +urw-base35-bookman-fonts +urw-base35-c059-fonts +urw-base35-d050000l-fonts +urw-base35-fonts +urw-base35-fonts-common +urw-base35-gothic-fonts +urw-base35-nimbus-mono-ps-fonts +urw-base35-nimbus-roman-fonts +urw-base35-nimbus-sans-fonts +urw-base35-p052-fonts +urw-base35-standard-symbols-ps-fonts +urw-base35-z003-fonts +usbmuxd +userspace-rcu +util-linux +util-linux-devel +uv +vala +vala-devel +vid.stab +vim-minimal +virt-what +vo-amrwbenc +volume_key +vscodium +vte291 +vulkan-headers +vulkan-loader +vulkan-loader-devel +wavpack +wavpack-help +wayland +wayland-devel +webkit2gtk4.1 +webkit2gtk5.0 +wget +which +wireless-regdb +woff2 +wpebackend-fdo +wqy-zenhei-fonts +x264-libs +x265 +xcb-util +xcb-util-image +xcb-util-keysyms +xcb-util-renderutil +xcb-util-wm +xdg-dbus-proxy +xdg-desktop-portal +xdg-desktop-portal-gnome +xdg-desktop-portal-gtk +xdg-user-dirs +xdg-user-dirs-gtk +xdg-utils +xfsprogs +xfsprogs-xfs_scrub +xkeyboard-config +xmlsec1 +xorg-x11-drv-amdgpu +xorg-x11-drv-amdgpu-debuginfo +xorg-x11-drv-amdgpu-debugsource +xorg-x11-drv-ati +xorg-x11-drv-ati-debuginfo +xorg-x11-drv-ati-debugsource +xorg-x11-drv-ati-help +xorg-x11-drv-dummy +xorg-x11-drv-dummy-debuginfo +xorg-x11-drv-dummy-debugsource +xorg-x11-drv-dummy-help +xorg-x11-drv-evdev +xorg-x11-drv-evdev-debuginfo +xorg-x11-drv-evdev-debugsource +xorg-x11-drv-evdev-devel +xorg-x11-drv-evdev-help +xorg-x11-drv-fbdev +xorg-x11-drv-fbdev-debuginfo +xorg-x11-drv-fbdev-debugsource +xorg-x11-drv-fbdev-help +xorg-x11-drv-libinput +xorg-x11-drv-libinput-debuginfo +xorg-x11-drv-libinput-debugsource +xorg-x11-drv-libinput-devel +xorg-x11-drv-libinput-help +xorg-x11-drv-nouveau +xorg-x11-drv-nouveau-debuginfo +xorg-x11-drv-nouveau-debugsource +xorg-x11-drv-nouveau-help +xorg-x11-drv-qxl +xorg-x11-drv-qxl-debuginfo +xorg-x11-drv-qxl-debugsource +xorg-x11-drv-synaptics-debuginfo +xorg-x11-drv-synaptics-debugsource +xorg-x11-drv-synaptics-devel +xorg-x11-drv-synaptics-legacy +xorg-x11-drv-v4l +xorg-x11-drv-v4l-debuginfo +xorg-x11-drv-v4l-debugsource +xorg-x11-drv-v4l-help +xorg-x11-drv-wacom +xorg-x11-drv-wacom-debuginfo +xorg-x11-drv-wacom-debugsource +xorg-x11-drv-wacom-devel +xorg-x11-drv-wacom-help +xorg-x11-fonts +xorg-x11-fonts-others +xorg-x11-font-utils +xorg-x11-proto-devel +xorg-x11-server +xorg-x11-server-common +xorg-x11-server-devel +xorg-x11-server-utils +xorg-x11-server-Xwayland +xorg-x11-util-macros +xorg-x11-utils +xorg-x11-xauth +xorg-x11-xinit +xorg-x11-xkb-utils +xvidcore +xz +xz-devel +xz-libs +yajl +yelp-tools +yelp-xsl +yum +zenity +zimg +zip +zlib +zlib-devel +zstd +zvbi +openEuler-repos diff --git a/scripts/configs-rpi/rpmlist-devstation-24.09 b/scripts/configs-rpi/rpmlist-devstation-24.09 new file mode 100644 index 0000000..3d3fe52 --- /dev/null +++ b/scripts/configs-rpi/rpmlist-devstation-24.09 @@ -0,0 +1,1034 @@ +dnf +alsa-utils +haveged +wpa_supplicant +vim +net-tools +iproute +iputils +NetworkManager +NetworkManager-wifi +NetworkManager-wwan +NetworkManager-bluetooth +NetworkManager-ovs +NetworkManager-ppp +openssh-server +openssh-clients +passwd +hostname +bluez +pulseaudio-module-bluetooth +parted +raspberrypi-firmware +raspberrypi-bluetooth +sudo +bc +systemd-timesyncd +abattis-cantarell-fonts +abseil-cpp +accountsservice +accountsservice-libs +acl +adobe-mappings-cmap +adobe-mappings-cmap-lang +adobe-mappings-pdf +adwaita-cursor-theme +adwaita-icon-theme +alsa-lib +appstream +aspell +atk +at-spi2-atk +at-spi2-core +attr +audit-libs +autoconf +automake +avahi +avahi-devel +avahi-glib +avahi-libs +babeltrace +basesystem +bash +binutils +binutils-gold +bluez-libs +bolt +brotli +brotli-devel +btrfs-progs +bubblewrap +bullet +bullet-devel +bzip2 +bzip2-devel +ca-certificates +cairo +cairo-devel +cairo-gobject +cairo-gobject-devel +cdparanoia-libs +checkpolicy +chkconfig +cmake +cmake-data +cmake-filesystem +cmake-rpm-macros +code +colord +colord-gtk +colord-libs +color-filesystem +containers-common +container-selinux +copy-jdk-configs +coreutils +cpio +cpp +cpp-gpgme +cracklib +criu +cronie +crontabs +crun +crypto-policies +cryptsetup +CUnit +CUnit-devel +cups-libs +cups-pk-helper +curl +cxl-libs +cyrus-sasl-lib +daxctl-libs +dbus +dbus-c++ +dbus-common +dbus-daemon +dbus-devel +dbus-glib +dbus-libs +dbus-tools +dbus-x11 +dconf +dejavu-fonts +desktop-file-utils +device-mapper +device-mapper-event +devstation-config +dhcp +diffutils +dnf-data +dnf-plugins-core +dosfstools +double-conversion +dracut +duktape +e2fsprogs +e2fsprogs-help +efibootmgr +efi-filesystem +efi-srpm-macros +efivar-libs +efl +efl-devel +elfutils-default-yama-scope +elfutils-libelf +elfutils-libs +emacs-filesystem +enchant2 +epiphany-runtime +evolution-data-server +evolution-data-server-langpacks +exempi +exiv2 +expat +ffmpeg +ffmpeg-libs +fftw-libs-single +file +file-libs +filesystem +findutils +firefox +firewalld +flac +flac-devel +flatpak +fontconfig +fontconfig-devel +fonts-filesystem +freeglut +freerdp +freetype +freetype-devel +fribidi +fribidi-devel +fuse +fuse3 +fuse3-help +fuse-common +fuse-help +fuse-overlayfs +fwupd +gawk +gc +gcab +gcc +gcc-gdb-plugin +gcr +gcr4 +gcr4-base +gcr-base +gd +gdb +gdb-headless +gdbm +gdisk +gdk-pixbuf2 +gdk-pixbuf2-devel +gdk-pixbuf2-modules +gdm +geoclue2 +geocode-glib +geocode-glib-devel +gettext +ghostscript +giflib +gjs +glib2 +glib2-devel +glibc +glibc-common +glibc-devel +glibmm24 +glib-networking +gmock +gmp +gnome-autoar +gnome-bluetooth +gnome-color-manager +gnome-control-center +gnome-control-center-filesystem +gnome-desktop3 +gnome-keyring +gnome-keyring-pam +gnome-menus +gnome-online-accounts +gnome-remote-desktop +gnome-session +gnome-settings-daemon +gnome-shell +gnome-software +gnome-terminal +gnome-tour +gnupg2 +gnutls +gobject-introspection +gobject-introspection-devel +google-droid-sans-fonts +google-noto-fonts-common +google-noto-sans-arabic-vf-fonts +google-noto-sans-armenian-vf-fonts +google-noto-sans-bengali-vf-fonts +google-noto-sans-canadian-aboriginal-vf-fonts +google-noto-sans-cherokee-vf-fonts +google-noto-sans-devanagari-vf-fonts +google-noto-sans-ethiopic-vf-fonts +google-noto-sans-georgian-vf-fonts +google-noto-sans-hebrew-vf-fonts +google-noto-sans-kannada-vf-fonts +google-noto-sans-khmer-vf-fonts +google-noto-sans-lao-vf-fonts +google-noto-sans-math-fonts +google-noto-sans-mono-vf-fonts +google-noto-sans-sinhala-vf-fonts +google-noto-sans-symbols2-fonts +google-noto-sans-symbols-vf-fonts +google-noto-sans-tamil-vf-fonts +google-noto-sans-thaana-vf-fonts +google-noto-sans-thai-vf-fonts +google-noto-sans-vf-fonts +google-noto-serif-armenian-vf-fonts +google-noto-serif-ethiopic-vf-fonts +google-noto-serif-georgian-vf-fonts +google-noto-serif-gujarati-vf-fonts +google-noto-serif-gurmukhi-vf-fonts +google-noto-serif-hebrew-vf-fonts +google-noto-serif-kannada-vf-fonts +google-noto-serif-khmer-vf-fonts +google-noto-serif-lao-vf-fonts +google-noto-serif-sinhala-vf-fonts +google-noto-serif-tamil-vf-fonts +google-noto-serif-thai-vf-fonts +google-noto-serif-vf-fonts +gpgme +gpm-libs +graphene +graphene-devel +graphite2 +graphite2-devel +graphviz +graphviz-devel +grep +groff-base +grub2-common +grub2-efi-aa64 +grub2-tools +grub2-tools-extra +grub2-tools-minimal +grubby +gsettings-desktop-schemas +gsm +gsound +gssdp +gst-editing-services +gstreamer1 +gstreamer1-plugins-bad-free +gstreamer1-plugins-base +gstreamer1-plugins-good +gtest +gtest-devel +gtk2 +gtk3 +gtk4 +gtk4-devel +gtk-update-icon-cache +guile +gupnp +gupnp-av +gupnp-dlna +gupnp-igd +gvfs +gvfs-client +gzip +harfbuzz +harfbuzz-devel +hicolor-icon-theme +highcontrast-icon-theme +hunspell +hunspell-en +hwdata +hyphen +ibus +ibus-libpinyin +ibus-libs +iio-sensor-proxy +ima-evm-utils-libs +info +inih +iniparser +initscripts +initscripts-service +ipcalc +ipset +ipset-libs +iptables +iptables-libs +iptables-nft +isl +iso-codes +iw +jack-audio-connection-kit +jansson +java-21-openjdk +java-21-openjdk-devel +java-21-openjdk-headless +javapackages-filesystem +jbig2dec +jbigkit-libs +jq +jsc4.1 +jsc5.0 +json-c +jsoncpp +json-glib +json-glib-devel +kbd +kbd-legacy +kbd-misc +keyutils-libs +kmod +kmod-libs +kpartx +krb5-libs +lame +lcms2 +less +libacl +libadwaita +libadwaita-devel +libaio +libaom +libappstream-glib +libarchive +libargon2 +libass +libassuan +libasyncns +libatasmart +libatomic_ops +libavdevice +libblkid +libblockdev +libbluray +libbpf +libbytesize +libcanberra +libcanberra-gtk3 +libcap +libcap-ng +libcbor +libcdio +libcdio-paranoia +libcloudproviders +libcomps +libconfig +libcurl +libdaemon +libdatrie +libdatrie-devel +libdav1d +libdazzle +libdb +libdbusmenu +libdbusmenu-gtk3 +libdnf +libdrm +libedit +libepoxy +libepoxy-devel +liberation-fonts +libev +libevdev +libevent +libevent-devel +libexif +libfdisk +libffado +libffi +libffi-devel +libfontenc +libgcc +libgcrypt +libgdata +libgee +libgexiv2 +libglvnd +libglvnd-core-devel +libglvnd-devel +libglvnd-egl +libglvnd-gles +libglvnd-glx +libglvnd-opengl +libgnomekbd +libgomp +libgpg-error +libgphoto2 +libgsf +libgtop2 +libgudev +libgusb +libgweather +libgweather-devel +libgxps +libhandy +libical +libICE +libicu +libicu-devel +libidn +libidn2 +libiec61883 +libiec61883-help +libijs +libimagequant +libimobiledevice +libinput +libinput-devel +libiptcdata +libjcat +libjpeg-turbo +libjpeg-turbo-devel +libkcapi +libksba +libldac +libldb +libmediaart +libmnl +libmodplug +libmodulemd +libmount +libmpc +libmtp +libndp +libnet +libnetfilter_conntrack +libnfnetlink +libnftnl +libnghttp2 +libnghttp2-devel +libnice +libnl3 +libnma +libnotify +libnsl2 +libnvme +libogg +libogg-devel +libosinfo +libpaper +libpcap +libpciaccess +libpfm +libpinyin +libpipeline +libplist +libpng +libpng-devel +libportal +libproxy +libpsl +libpsl-devel +libpwquality +LibRaw +libraw1394 +libraw1394-help +librepo +libreport-filesystem +librsvg2 +libsamplerate +libseccomp +libsecret +libselinux +libselinux-devel +libsemanage +libsepol +libsepol-devel +libshout +libsigc++20 +libslirp +libSM +libsmartcols +libsmbclient +libsndfile +libsndfile-devel +libsolv +libsoup +libsoup3 +libsoup3-devel +libspectre +libssh +libstdc++ +libstemmer +libsysprof-ui +libtalloc +libtasn1 +libtdb +libtevent +libthai +libthai-devel +libtheora +libtiff +libtiff-devel +libtirpc +libtool +libtool-ltdl +libtraceevent +libtracker-sparql3 +libudisks2 +libunistring +libunwind +libunwind-devel +libusbmuxd +libusbx +libuser +libutempter +libuuid +libuv +libv4l +libva +libvdpau +libverto +libvisual +libvncserver +libvorbis +libvorbis-devel +libvpx +libwacom +libwacom-data +libwbclient +libwebp +libwinpr +libwpe +libX11 +libX11-devel +libXau +libXau-devel +libXaw +libxcb +libxcb-devel +libXcomposite +libxcrypt +libxcrypt-devel +libXcursor +libXcursor-devel +libxcvt +libXdamage +libXdamage-devel +libXdmcp +libXext +libXext-devel +libXfixes +libXfixes-devel +libXfont2 +libXft +libXft-devel +libXi +libXi-devel +libXinerama +libXinerama-devel +libxkbcommon +libxkbcommon-devel +libxkbcommon-x11 +libxkbcommon-x11-devel +libxkbfile +libxklavier +libxml2 +libxml++ +libxml2-devel +libxmlb +libXmu +libXpm +libXrandr +libXrandr-devel +libXrender +libXrender-devel +libXScrnSaver +libxshmfence +libxslt +libXt +libXtst +libXv +libXxf86dga +libXxf86vm +libyaml +lilv-libs +llvm-libs +lmdb +lockdev +logrotate +low-memory-monitor +lua +luajit +luajit-devel +lua-posix +lvm2 +lvm2-dbusd +lvm2-help +lz4 +lzo +m4 +make +malcontent-libs +man-db +mcpp +mdadm +mesa-demos +mesa-dri-drivers +mesa-filesystem +mesa-libEGL +mesa-libEGL-devel +mesa-libgbm +mesa-libGL +mesa-libglapi +mesa-libGLU +mobile-broadband-provider-info +ModemManager-glib +mokutil +mozilla-filesystem +mozjs102 +mpfr +mpg123-devel +mpg123-libs +mtdev +multipath-tools +mutter +nautilus +ncurses +ncurses-base +ncurses-libs +ndctl +ndctl-libs +nettle +NetworkManager-libnm +newt +nftables +nm-connection-editor +npth +nspr +nss +nss-softokn +nss-util +ntfs-3g +ocl-icd +oniguruma +openal-soft +opencore-amr +OpenCSD +openEuler-gpg-keys +openEuler-logos +openEuler-release +openEuler-rpm-config +openjpeg2 +openldap +openssh +openssl +openssl-devel +openssl-libs +openssl-pkcs11 +opus +opus-devel +orc +osinfo-db +osinfo-db-tools +os-prober +ostree +p11-kit +p11-kit-trust +PackageKit +pam +pango +pango-devel +pciutils +pcre2 +pcre2-devel +pcre +perf +perl +perl-Algorithm-Diff +perl-Archive-Tar +perl-autodie +perl-B-Debug +perl-bignum +perl-Carp +perl-Compress-Raw-Bzip2 +perl-Compress-Raw-Zlib +perl-Config-Perl-V +perl-constant +perl-CPAN-Meta +perl-CPAN-Meta-Requirements +perl-CPAN-Meta-YAML +perl-Data-Dumper +perl-devel +perl-Devel-PPPort +perl-Digest +perl-Digest-MD5 +perl-Digest-SHA +perl-Encode +perl-Encode-devel +perl-Encode-Locale +perl-Env +perl-experimental +perl-Exporter +perl-ExtUtils-Command +perl-ExtUtils-Install +perl-ExtUtils-MakeMaker +perl-ExtUtils-Manifest +perl-ExtUtils-ParseXS +perl-File-Fetch +perl-File-Path +perl-File-Temp +perl-Filter +perl-Filter-Simple +perl-Getopt-Long +perl-HTTP-Tiny +perl-IO-Compress +perl-IO-Socket-IP +perl-IO-Socket-SSL +perl-IPC-Cmd +perl-IPC-System-Simple +perl-IPC-SysV +perl-JSON-PP +perl-libnet +perl-libs +perl-Locale-Codes +perl-Locale-Maketext +perl-Math-BigInt +perl-Math-BigInt-FastCalc +perl-MIME-Base64 +perl-Module-CoreList +perl-Module-Load +perl-Module-Load-Conditional +perl-Module-Metadata +perl-Mozilla-CA +perl-Net-SSLeay +perl-Params-Check +perl-parent +perl-PathTools +perl-perlfaq +perl-PerlIO-via-QuotedPrint +perl-Perl-OSType +perl-Pod-Checker +perl-Pod-Escapes +perl-podlators +perl-Pod-Parser +perl-Pod-Perldoc +perl-Pod-Simple +perl-Pod-Usage +perl-Scalar-List-Utils +perl-Socket +perl-Storable +perl-Sys-Syslog +perl-Term-ANSIColor +perl-Term-Cap +perl-Test-Harness +perl-Test-Simple +perl-Text-Balanced +perl-Text-Diff +perl-Text-ParseWords +perl-Text-Tabs+Wrap +perl-Thread-Queue +perl-threads +perl-threads-shared +perl-Time-HiRes +perl-Time-Local +perl-Unicode-Collate +perl-Unicode-Normalize +perl-URI +perl-version +pigz +pinentry +pipewire +pipewire-gstreamer +pipewire-libs +pixman +pixman-devel +pkgconf +pngquant +policycoreutils +polkit +polkit-devel +polkit-help +polkit-libs +polkit-pkla-compat +poppler +poppler-cpp +poppler-data +poppler-glib +popt +procps-ng +protobuf +protobuf-c +protobuf-compiler +psmisc +publicsuffix-list +pulseaudio +pulseaudio-libs +pulseaudio-libs-devel +pulseaudio-libs-glib2 +python3 +python3-cairo +python3-dateutil +python3-dbus +python3-distro +python3-dnf +python3-dnf-plugins-core +python3-firewall +python3-gobject +python3-gobject-base +python3-gpgme +python3-hawkey +python3-iniconfig +python3-libcomps +python3-libdnf +python3-mako +python3-markdown +python3-markupsafe +python3-nftables +python3-packaging +python3-pip +python3-pluggy +python3-pyparsing +python3-pyqt5-sip +python3-pytest +python3-pyudev +python3-qt5 +python3-qt5-base +python3-rpm +python3-setuptools +python3-six +python3-unbound +python-pip-wheel +python-qt5-rpm-macros +python-setuptools +qt5-qtbase +qt5-qtbase-common +qt5-qtbase-gui +qt5-qtconnectivity +qt5-qtdeclarative +qt5-qtenginio +qt5-qtlocation +qt5-qtmultimedia +qt5-qtsensors +qt5-qtserialport +qt5-qtsvg +qt5-qttools-common +qt5-qttools-libs-designer +qt5-qttools-libs-help +qt5-qtwebchannel +qt5-qtwebsockets +qt5-qtx11extras +qt5-qtxmlpatterns +qt5-srpm-macros +qt-settings +readline +rest +rpm +rpm-libs +rpm-ostree +rpm-ostree-libs +rtkit +rygel +samba-client-libs +samba-common +sbc +SDL +SDL2 +SDL2-devel +sed +selinux-policy +selinux-policy-targeted +serd +setup +sgml-common +shadow +shadow-subid-devel +shared-mime-info +shim +skopeo +slang +slirp4netns +snapd-glib +sord +sound-theme-freedesktop +soxr +speex +speexdsp +sqlite +sqlite-devel +sratom +srt-libs +startup-notification +switcheroo-control +sysprof +sysprof-cli +sysprof-devel +systemd +systemd-devel +systemd-libs +systemd-pam +systemd-udev +systemtap-sdt-devel +taglib +tar +tcl +thin-provisioning-tools +thin-provisioning-tools-help +totem-pl-parser +tpm2-tss +tracker3 +tracker3-miners +trousers +twolame +tzdata +tzdata-java +uchardet +udisks2 +unbound-libs +upower +urw-base35-bookman-fonts +urw-base35-c059-fonts +urw-base35-d050000l-fonts +urw-base35-fonts +urw-base35-fonts-common +urw-base35-gothic-fonts +urw-base35-nimbus-mono-ps-fonts +urw-base35-nimbus-roman-fonts +urw-base35-nimbus-sans-fonts +urw-base35-p052-fonts +urw-base35-standard-symbols-ps-fonts +urw-base35-z003-fonts +usbmuxd +userspace-rcu +util-linux +util-linux-devel +vala +vala-devel +vid.stab +vim-common +vim-enhanced +vim-filesystem +vim-minimal +vo-amrwbenc +volume_key +vte291 +wavpack +wavpack-help +wayland +wayland-devel +webkit2gtk3 +webkit2gtk3-jsc +webkit2gtk4.1 +webkit2gtk5.0 +webp-pixbuf-loader +which +wireless-regdb +woff2 +wpebackend-fdo +wqy-zenhei-fonts +x264-libs +x265 +xcb-util +xcb-util-image +xcb-util-keysyms +xcb-util-renderutil +xcb-util-wm +xdg-dbus-proxy +xdg-desktop-portal +xdg-desktop-portal-gnome +xdg-desktop-portal-gtk +xdg-user-dirs +xdg-user-dirs-gtk +xdg-utils +xfsprogs +xfsprogs-xfs_scrub +xkeyboard-config +xorg-x11-drv-libinput +xorg-x11-fonts +xorg-x11-fonts-others +xorg-x11-font-utils +xorg-x11-proto-devel +xorg-x11-server +xorg-x11-server-common +xorg-x11-server-utils +xorg-x11-server-Xwayland +xorg-x11-utils +xorg-x11-xauth +xorg-x11-xinit +xorg-x11-xkb-utils +xvidcore +xz +xz-devel +xz-libs +yajl +yum +zenity +zimg +zip +zlib +zlib-devel +zstd +zvbi +openEuler-repos diff --git a/scripts/configs-rpi/rpmlist-devstation-25.03 b/scripts/configs-rpi/rpmlist-devstation-25.03 new file mode 100644 index 0000000..7b4ba85 --- /dev/null +++ b/scripts/configs-rpi/rpmlist-devstation-25.03 @@ -0,0 +1,1265 @@ +dnf +alsa-utils +haveged +wpa_supplicant +vim +net-tools +iproute +iputils +NetworkManager +NetworkManager-wifi +NetworkManager-wwan +NetworkManager-bluetooth +NetworkManager-ovs +NetworkManager-ppp +openssh-server +openssh-clients +passwd +hostname +bluez +pulseaudio-module-bluetooth +parted +raspberrypi-firmware +raspberrypi-bluetooth +sudo +bc +systemd-timesyncd +abattis-cantarell-fonts +abseil-cpp +accountsservice +accountsservice-libs +acl +adcli +adobe-mappings-cmap +adobe-mappings-cmap-lang +adobe-mappings-pdf +adwaita-cursor-theme +adwaita-icon-theme +adwaita-qt5 +alsa-lib +ansible +appstream +atk +atk-devel +atkmm +at-spi2-atk +at-spi2-core +audit +audit-libs +authselect +autoconf +autogen +automake +avahi-glib +avahi-libs +babeltrace +basesystem +bash +bind +bind-dnssec-doc +bind-dnssec-utils +bind-libs +bind-license +bind-utils +binutils +bluez-libs +bolt +boost-iostreams +brotli +brotli-devel +btrfs-progs +bubblewrap +bullet +bzip2 +bzip2-devel +ca-certificates +cairo +cairo-devel +cairo-gobject +cairo-gobject-devel +cairomm +c-ares +ccid +cdparanoia-libs +checkpolicy +chkconfig +chrony +chrpath +cmake +cmake-data +cmake-filesystem +cmake-rpm-macros +colord +colord-gtk +colord-libs +color-filesystem +containers-common +container-selinux +copy-jdk-configs +coreutils +cpio +cpp +cpp-gpgme +cracklib +criu +cronie +crontabs +crun +crypto-policies +crypto-policies-scripts +cryptsetup +CUnit +CUnit-devel +cups-libs +cups-pk-helper +curl +cxl-libs +cyrus-sasl +cyrus-sasl-lib +daxctl-libs +dbus +dbus-c++ +dbus-common +dbus-daemon +dbus-glib +dbus-libs +dbus-tools +dbus-x11 +dconf +debugedit +dejavu-fonts +desktop-file-utils +device-mapper +device-mapper-event +devstation-config +dhcp +diffutils +ding-libs +dmidecode +dnf-data +dnf-plugins-core +docbook-dtds +dosfstools +double-conversion +dracut +dracut-config-generic +dracut-config-rescue +dracut-live +dracut-network +dracut-squash +duktape +dwz +e2fsprogs +e2fsprogs-help +efibootmgr +efi-filesystem +efi-srpm-macros +efivar-libs +efl +elfutils +elfutils-debuginfod-client +elfutils-default-yama-scope +elfutils-extra +elfutils-libelf +elfutils-libs +emacs-filesystem +enchant2 +epiphany-runtime +epkg +ethtool +euler-copilot-shell +evolution-data-server +evolution-data-server-langpacks +exempi +exiv2 +expat +ffmpeg +ffmpeg-libs +fftw-libs-single +file +file-libs +filesystem +findutils +fipscheck +firefox +firewalld +flac +flatpak +fontconfig +fontconfig-devel +fonts-filesystem +freeglut +freerdp +freetype +freetype-devel +fribidi +fribidi-devel +fuse +fuse3 +fuse3-help +fuse-common +fuse-help +fuse-overlayfs +fwupd +gawk +gc +gcab +gcc +gcc-c++ +gcc-gdb-plugin +gcr +gcr4 +gcr4-base +gcr-base +gd +gdb +gdb-headless +gdbm +gdisk +gdk-pixbuf2 +gdk-pixbuf2-devel +gdk-pixbuf2-modules +gdm +geoclue2 +geocode-glib +geocode-glib-devel +gettext +gettext-envsubst +gettext-libs +gettext-runtime +giflib +git +git-core +gjs +glib2 +glib2-devel +glibc +glibc-common +glibc-devel +glibmm24 +glibmm24-help +glib-networking +gmock +gmp +gnome-autoar +gnome-bluetooth +gnome-color-manager +gnome-control-center +gnome-control-center-filesystem +gnome-desktop3 +gnome-doc-utils +gnome-doc-utils-stylesheets +gnome-keyring +gnome-keyring-pam +gnome-menus +gnome-online-accounts +gnome-remote-desktop +gnome-session +gnome-settings-daemon +gnome-shell +gnome-shell-extension-dash-to-dock +gnome-shell-extensions +gnome-software +gnome-terminal +gnome-tour +gnome-user-docs +gnupg2 +gnutls +gobject-introspection +gobject-introspection-devel +google-droid-sans-fonts +google-noto-fonts-common +google-noto-sans-arabic-vf-fonts +google-noto-sans-armenian-vf-fonts +google-noto-sans-bengali-vf-fonts +google-noto-sans-canadian-aboriginal-vf-fonts +google-noto-sans-cherokee-vf-fonts +google-noto-sans-devanagari-vf-fonts +google-noto-sans-ethiopic-vf-fonts +google-noto-sans-georgian-vf-fonts +google-noto-sans-hebrew-vf-fonts +google-noto-sans-kannada-vf-fonts +google-noto-sans-khmer-vf-fonts +google-noto-sans-lao-vf-fonts +google-noto-sans-math-fonts +google-noto-sans-mono-vf-fonts +google-noto-sans-sinhala-vf-fonts +google-noto-sans-symbols2-fonts +google-noto-sans-symbols-vf-fonts +google-noto-sans-tamil-vf-fonts +google-noto-sans-thaana-vf-fonts +google-noto-sans-thai-vf-fonts +google-noto-sans-vf-fonts +google-noto-serif-armenian-vf-fonts +google-noto-serif-ethiopic-vf-fonts +google-noto-serif-georgian-vf-fonts +google-noto-serif-gujarati-vf-fonts +google-noto-serif-gurmukhi-vf-fonts +google-noto-serif-hebrew-vf-fonts +google-noto-serif-kannada-vf-fonts +google-noto-serif-khmer-vf-fonts +google-noto-serif-lao-vf-fonts +google-noto-serif-sinhala-vf-fonts +google-noto-serif-tamil-vf-fonts +google-noto-serif-thai-vf-fonts +google-noto-serif-vf-fonts +gpgme +graphene +graphene-devel +graphite2 +graphite2-devel +graphviz +graphviz-devel +grep +groff-base +grub2-common +grub2-efi-aa64 +grub2-efi-aa64-cdboot +grub2-tools +grub2-tools-extra +grub2-tools-minimal +grubby +gsettings-desktop-schemas +gsettings-desktop-schemas-devel +gsm +gsound +gssdp +gst-editing-services +gstreamer1 +gstreamer1-plugins-bad-free +gstreamer1-plugins-base +gstreamer1-plugins-good +gstreamer1-plugins-good-qt +gtest +gtest-devel +gtk2 +gtk3 +gtk4 +gtk4-devel +gtkmm30 +gtk-update-icon-cache +guile +gupnp +gupnp-av +gupnp-dlna +gvfs +gvfs-client +gzip +harfbuzz +harfbuzz-devel +hdparm +hicolor-icon-theme +highcontrast-icon-theme +hunspell +hunspell-en +hwdata +hyphen +ibus +ibus-libpinyin +ibus-libs +iio-sensor-proxy +ima-evm-utils-libs +info +inih +iniparser +initscripts +initscripts-service +ipcalc +ipmitool +iprutils +ipset +ipset-libs +iptables +iptables-help +iptables-libs +iptables-nft +irqbalance +iso-codes +itstool +iw +jack-audio-connection-kit +jansson +java-21-openjdk +java-21-openjdk-devel +java-21-openjdk-headless +javapackages-filesystem +jbig2dec +jbigkit-libs +jitterentropy-library +jq +jsc4.1 +jsc5.0 +json-c +jsoncpp +json-glib +json-glib-devel +kbd +kbd-legacy +kbd-misc +kexec-tools +keyutils-libs +kf5-kcalendarcore +kf5-kcalendarcore-devel +kmod +kmod-libs +kpartx +krb5-libs +lame +lcms2 +less +libacl +libadwaita +libadwaita-devel +libadwaita-qt5 +libaio +libaom +libappstream-glib +libarchive +libargon2 +libass +libassuan +libasyncns +libatasmart +libattr1 +libavdevice +libblkid +libblockdev +libbluray +libbpf +libbytesize +libcanberra +libcanberra-gtk3 +libcap +libcap-ng +libcbor +libcdio +libcdio-paranoia +libcloudproviders +libcomps +libconfig +libcurl +libdaemon +libdatrie +libdatrie-devel +libdav1d +libdazzle +libdb +libdbusmenu +libdbusmenu-gtk3 +libdnf +libdrm +libdrm-devel +libdvdnav +libdvdread +libedit +libepoxy +libepoxy-devel +liberation-fonts +libestr +libev +libevdev +libevent +libexif +libfastjson +libfdisk +libffado +libffi +libffi-devel +libfontenc +libfontenc-devel +libgcc +libgcrypt +libgdata +libgee +libgexiv2 +libglvnd +libglvnd-core-devel +libglvnd-devel +libglvnd-egl +libglvnd-gles +libglvnd-glx +libglvnd-opengl +libgnomekbd +libgomp +libgpg-error +libgphoto2 +libgs +libgsf +libgtop2 +libgudev +libgusb +libgweather +libgweather-devel +libgxps +libhandy +libical +libical-devel +libICE +libicu +libicu-devel +libidn +libidn2 +libiec61883 +libiec61883-help +libijs +libimagequant +libimobiledevice +libinput +libipa_hbac +libiptcdata +libjcat +libjpeg-turbo +libjpeg-turbo-devel +libkcapi +libksba +libldac +libldb +libmediaart +libmetalink +libmnl +libmodplug +libmodulemd +libmount +libmpc +libmspack +libmtp +libndp +libnet +libnetfilter_conntrack +libnfnetlink +libnfsidmap +libnftnl +libnghttp2 +libnghttp2-devel +libnl3 +libnma +libnotify +libnsl2 +libnvme +libogg +libosinfo +libpaper +libpcap +libpciaccess +libpciaccess-devel +libpfm +libpinyin +libpipeline +libplist +libpng +libpng-devel +libportal +libproxy +libpsl +libpsl-devel +libpwquality +LibRaw +libraw1394 +libraw1394-help +librepo +libreport-filesystem +librsvg2 +libsamplerate +libseccomp +libsecret +libselinux +libselinux-devel +libsemanage +libsepol +libsepol-devel +libshout +libsigc++20 +libsigc++20-help +libslirp +libSM +libsmartcols +libsmbclient +libsndfile +libsodium +libsolv +libsoup +libsoup3 +libsoup3-devel +libspectre +libsrtp +libssh +libsss_autofs +libsss_certmap +libsss_idmap +libsss_nss_idmap +libsss_sudo +libstdc++ +libstdc++-devel +libstemmer +libsysprof-ui +libtalloc +libtasn1 +libtdb +libteam +libtevent +libtextstyle +libthai +libthai-devel +libtheora +libtiff +libtiff-devel +libtirpc +libtool +libtool-ltdl +libtraceevent +libtracker-sparql3 +libudisks2 +libunistring +libunwind +libusbmuxd +libusbx +libuser +libutempter +libuuid +libuv +libv4l +libva +libvdpau +libverto +libvisual +libvncserver +libvorbis +libvpx +libwacom +libwacom-data +libwbclient +libwebp +libwebp-devel +libwinpr +libwpe +libX11 +libX11-devel +libXau +libXau-devel +libxcb +libxcb-devel +libXcomposite +libxcrypt +libxcrypt-devel +libXcursor +libXcursor-devel +libxcvt +libXdamage +libXdamage-devel +libXdmcp +libXext +libXext-devel +libXfixes +libXfixes-devel +libXfont2 +libXfont2-devel +libXft +libXft-devel +libXi +libXi-devel +libXinerama +libXinerama-devel +libxkbcommon +libxkbcommon-devel +libxkbcommon-x11 +libxkbfile +libxklavier +libxml2 +libxml++ +libxml2-devel +libxmlb +libXmu +libXpm +libXrandr +libXrandr-devel +libXrender +libXrender-devel +libXScrnSaver +libxshmfence +libxslt +libXt +libXtst +libXv +libXxf86vm +libyaml +llvm-libs +lmdb +lm_sensors +lockdev +logrotate +low-memory-monitor +lshw-B.02.20-2.oe2503.aarch64.rpm +lsscsi +lua +luajit +lua-posix +lvm2 +lvm2-dbusd +lvm2-help +lz4 +lzo +m4 +make +malcontent-libs +mallard-rng +man-db +mariadb-connector-c +mcpp +mcstrans +mdadm +mesa-demos +mesa-dri-drivers +mesa-filesystem +mesa-libEGL +mesa-libEGL-devel +mesa-libgbm +mesa-libGL +mesa-libglapi +mesa-libGL-devel +mesa-libGLU +mesa-vulkan-drivers +mkfontscale +mobile-broadband-provider-info +ModemManager-glib +mokutil +mozilla-filesystem +mozjs102 +mpfr +mpg123-libs +mtdev +multipath-tools +mutter +mutter-devel +nautilus +ncurses +ncurses-base +ncurses-libs +ndctl +ndctl-libs +net-snmp +net-snmp-libs +nettle +NetworkManager-config-server +NetworkManager-libnm +newt +nftables +nm-connection-editor +nodejs +nodejs-docs +nodejs-full-i18n +nodejs-libs +nodejs-packaging +npm +npth +nspr +nss +nss-softokn +nss-util +ntfs-3g +ntp +ntpstat +numactl-libs +ocl-icd +oeDevPlugin +oedp +oegitext +oniguruma +openal-soft +opencore-amr +OpenCSD +openEuler-gpg-keys +openEuler-latest-release +openEuler-logos +openEuler-release +openEuler-rpm-config +openjpeg2 +openldap +opensc +openssh +openssl +openssl-libs +openssl-pkcs11 +open-vm-tools +open-vm-tools-desktop +opus +orc +osinfo-db +osinfo-db-tools +os-prober +ostree +p11-kit +p11-kit-trust +PackageKit +pam +pango +pango-devel +pangomm +patch +pciutils +pcre2 +pcre2-devel +pcsc-lite +perf +perl +perl-Algorithm-Diff +perl-Archive-Tar +perl-autodie +perl-B-Debug +perl-bignum +perl-Carp +perl-Compress-Raw-Bzip2 +perl-Compress-Raw-Zlib +perl-Config-Perl-V +perl-constant +perl-CPAN-Meta +perl-CPAN-Meta-Requirements +perl-CPAN-Meta-YAML +perl-Data-Dumper +perl-devel +perl-Devel-PPPort +perl-Digest +perl-Digest-MD5 +perl-Digest-SHA +perl-Encode +perl-Encode-devel +perl-Encode-Locale +perl-Env +perl-Error +perl-experimental +perl-Exporter +perl-ExtUtils-Command +perl-ExtUtils-Install +perl-ExtUtils-MakeMaker +perl-ExtUtils-Manifest +perl-ExtUtils-ParseXS +perl-File-Fetch +perl-File-Path +perl-File-Temp +perl-Filter +perl-Filter-Simple +perl-Getopt-Long +perl-Git +perl-HTTP-Tiny +perl-Importer +perl-IO-Compress +perl-IO-Socket-IP +perl-IO-Socket-SSL +perl-IPC-Cmd +perl-IPC-System-Simple +perl-IPC-SysV +perl-JSON-PP +perl-libnet +perl-libs +perl-Locale-Codes +perl-Locale-Maketext +perl-Math-BigInt +perl-Math-BigInt-FastCalc +perl-MIME-Base64 +perl-Module-CoreList +perl-Module-Load +perl-Module-Load-Conditional +perl-Module-Metadata +perl-Mozilla-CA +perl-Net-SSLeay +perl-Params-Check +perl-parent +perl-PathTools +perl-perlfaq +perl-PerlIO-via-QuotedPrint +perl-Perl-OSType +perl-Pod-Checker +perl-Pod-Escapes +perl-podlators +perl-Pod-Parser +perl-Pod-Perldoc +perl-Pod-Simple +perl-Pod-Usage +perl-Scalar-List-Utils +perl-Socket +perl-Storable +perl-Sys-Syslog +perl-Term-ANSIColor +perl-Term-Cap +perl-TermReadKey +perl-Term-Table +perl-Test-Harness +perl-Test-Simple +perl-Text-Balanced +perl-Text-Diff +perl-Text-ParseWords +perl-Text-Tabs+Wrap +perl-Thread-Queue +perl-threads +perl-threads-shared +perl-Time-HiRes +perl-Time-Local +perl-Unicode-Collate +perl-Unicode-LineBreak +perl-Unicode-Normalize +perl-URI +perl-version +pigz +pinentry +pipewire +pipewire-gstreamer +pipewire-libs +pixman +pixman-devel +pkgconf +pngquant +policycoreutils +policycoreutils-python-utils +polkit +polkit-devel +polkit-help +polkit-libs +polkit-pkla-compat +polkit-qt5-1 +polkit-qt5-1-devel +poppler +poppler-cpp +poppler-data +poppler-glib +popt +powertop +procps-ng +protobuf +protobuf-c +protobuf-compiler +psmisc +publicsuffix-list +pulseaudio +pulseaudio-libs +pulseaudio-libs-glib2 +python3 +python3-audit +python3-babel +python3-bcrypt +python3-cairo +python3-cffi +python3-configobj +python3-cryptography +python3-dateutil +python3-dbus +python3-decorator +python3-distro +python3-dnf +python3-dnf-plugins-core +python3-firewall +python3-gobject +python3-gobject-base +python3-gpgme +python3-hawkey +python3-importlib-metadata +python3-iniconfig +python3-IPy +python3-jinja2 +python3-jmespath +python3-libcomps +python3-libdnf +python3-libselinux +python3-libsemanage +python3-libxml2 +python3-linux-procfs +python3-lxml +python3-mako +python3-markdown +python3-markupsafe +python3-nftables +python3-packaging +python3-paramiko +python3-perf +python3-pip +python3-pluggy +python3-ply +python3-policycoreutils +python3-prettytable +python3-pyasn1 +python3-pycparser +python3-pynacl +python3-pyparsing +python3-pyqt5-sip +python3-pytest +python3-pytz +python3-pyudev +python3-pyyaml +python3-qt5 +python3-qt5-base +python3-rpm +python3-schedutils +python3-setools +python3-setuptools +python3-six +python3-slip +python3-unbound +python3-wcwidth +python3-zipp +python-pip-wheel +python-qt5-rpm-macros +python-setuptools +qgnomeplatform-qt5 +qt5-qtbase +qt5-qtbase-common +qt5-qtbase-devel +qt5-qtbase-gui +qt5-qtconnectivity +qt5-qtdeclarative +qt5-qtenginio +qt5-qtgraphicaleffects +qt5-qtlocation +qt5-qtmultimedia +qt5-qtquickcontrols2 +qt5-qtsensors +qt5-qtserialport +qt5-qtsvg +qt5-qttools-common +qt5-qttools-libs-designer +qt5-qttools-libs-help +qt5-qtwayland +qt5-qtwebchannel +qt5-qtwebsockets +qt5-qtx11extras +qt5-qtxmlpatterns +qt5-rpm-macros +qt5-srpm-macros +qt-settings +rdma-core +readline +rest +rng-tools +rootfiles +rpm +rpm-build +rpm-libs +rpm-ostree +rpm-ostree-libs +rsync +rsyslog +rtkit +rust-cbindgen +rust-ripgrep +rygel +samba-client +samba-client-libs +samba-common +samba-libs +sbc +SDL +SDL2 +security-tool +sed +selinux-policy +selinux-policy-mls +selinux-policy-targeted +setup +sg3_utils +sgml-common +shadow +shadow-subid-devel +shared-mime-info +shim +skopeo +slang +slirp4netns +snapd-glib +snappy +sombok +sound-theme-freedesktop +soundtouch +soxr +speex +speexdsp +sqlite +sqlite-devel +squashfs-tools +srt-libs +sshpass +sssd +sssd-ad +sssd-client +sssd-common +sssd-common-pac +sssd-ipa +sssd-krb5 +sssd-krb5-common +sssd-ldap +sssd-nfs-idmap +sssd-proxy +startup-notification +switcheroo-control +sysfsutils +sysprof +sysprof-cli +sysprof-devel +systemd +systemd-libs +systemd-pam +systemd-rpm-macros +systemd-udev +systemtap +systemtap-client +systemtap-runtime +systemtap-sdt-devel +taglib +tar +tcl +telepathy-filesystem +telepathy-glib +telepathy-logger +thin-provisioning-tools +thin-provisioning-tools-help +thunderbird +thunderbird-librnp-rnp +timedatex +totem-pl-parser +tpm2-tss +tracker3 +tracker3-miners +trousers +ttmkfdir +tuned +twolame +tzdata +tzdata-java +uchardet +udisks2 +umockdev +unbound-libs +unzip +upower +urw-base35-bookman-fonts +urw-base35-c059-fonts +urw-base35-d050000l-fonts +urw-base35-fonts +urw-base35-fonts-common +urw-base35-gothic-fonts +urw-base35-nimbus-mono-ps-fonts +urw-base35-nimbus-roman-fonts +urw-base35-nimbus-sans-fonts +urw-base35-p052-fonts +urw-base35-standard-symbols-ps-fonts +urw-base35-z003-fonts +usbmuxd +userspace-rcu +util-linux +util-linux-devel +vala +vala-devel +vid.stab +vim-minimal +virt-what +vo-amrwbenc +volume_key +vscodium +vte291 +vulkan-headers +vulkan-loader +vulkan-loader-devel +wavpack +wavpack-help +wayland +wayland-devel +webkit2gtk4.1 +webkit2gtk5.0 +webrtc-audio-processing +wget +which +wireless-regdb +woff2 +wpebackend-fdo +wqy-zenhei-fonts +x264-libs +x265 +xcb-util +xcb-util-image +xcb-util-keysyms +xcb-util-renderutil +xcb-util-wm +xdg-dbus-proxy +xdg-desktop-portal +xdg-desktop-portal-gnome +xdg-desktop-portal-gtk +xdg-user-dirs +xdg-user-dirs-gtk +xdg-utils +xfsprogs +xfsprogs-xfs_scrub +xkeyboard-config +xmlsec1 +xorg-x11-drv-amdgpu +xorg-x11-drv-amdgpu-debuginfo +xorg-x11-drv-amdgpu-debugsource +xorg-x11-drv-ati +xorg-x11-drv-ati-debuginfo +xorg-x11-drv-ati-debugsource +xorg-x11-drv-ati-help +xorg-x11-drv-dummy +xorg-x11-drv-dummy-debuginfo +xorg-x11-drv-dummy-debugsource +xorg-x11-drv-dummy-help +xorg-x11-drv-evdev +xorg-x11-drv-evdev-debuginfo +xorg-x11-drv-evdev-debugsource +xorg-x11-drv-evdev-devel +xorg-x11-drv-evdev-help +xorg-x11-drv-fbdev +xorg-x11-drv-fbdev-debuginfo +xorg-x11-drv-fbdev-debugsource +xorg-x11-drv-fbdev-help +xorg-x11-drv-libinput +xorg-x11-drv-libinput-debuginfo +xorg-x11-drv-libinput-debugsource +xorg-x11-drv-libinput-devel +xorg-x11-drv-libinput-help +xorg-x11-drv-nouveau +xorg-x11-drv-nouveau-debuginfo +xorg-x11-drv-nouveau-debugsource +xorg-x11-drv-nouveau-help +xorg-x11-drv-qxl +xorg-x11-drv-qxl-debuginfo +xorg-x11-drv-qxl-debugsource +xorg-x11-drv-synaptics-debuginfo +xorg-x11-drv-synaptics-debugsource +xorg-x11-drv-synaptics-devel +xorg-x11-drv-synaptics-legacy +xorg-x11-drv-v4l +xorg-x11-drv-v4l-debuginfo +xorg-x11-drv-v4l-debugsource +xorg-x11-drv-v4l-help +xorg-x11-drv-wacom +xorg-x11-drv-wacom-debuginfo +xorg-x11-drv-wacom-debugsource +xorg-x11-drv-wacom-devel +xorg-x11-drv-wacom-help +xorg-x11-fonts +xorg-x11-fonts-others +xorg-x11-font-utils +xorg-x11-proto-devel +xorg-x11-server +xorg-x11-server-common +xorg-x11-server-devel +xorg-x11-server-utils +xorg-x11-server-Xwayland +xorg-x11-util-macros +xorg-x11-xauth +xorg-x11-xinit +xorg-x11-xkb-utils +xprop +xvidcore +xxhash-libs +xz +xz-devel +xz-libs +yajl +yelp-tools +yelp-xsl +yum +zenity +zimg +zip +zlib +zlib-devel +zstd +zstd-devel +zvbi +openEuler-repos diff --git a/scripts/configs-rpi/rpmlist-gnome b/scripts/configs-rpi/rpmlist-gnome new file mode 100644 index 0000000..87020d6 --- /dev/null +++ b/scripts/configs-rpi/rpmlist-gnome @@ -0,0 +1,194 @@ +dnf +alsa-utils +haveged +wpa_supplicant +vim +net-tools +iproute +iputils +NetworkManager +NetworkManager-wifi +NetworkManager-wwan +NetworkManager-bluetooth +NetworkManager-ovs +NetworkManager-ppp +openssh-server +openssh-clients +passwd +hostname +bluez +pulseaudio-module-bluetooth +parted +raspberrypi-firmware +raspberrypi-bluetooth +sudo +firefox +bc +systemd-timesyncd +dejavu-fonts +liberation-fonts +gnu-*-fonts +google-*-fonts +xorg-x11-apps +xorg-x11-drivers +xorg-x11-drv-ati +xorg-x11-drv-dummy +xorg-x11-drv-evdev +xorg-x11-drv-fbdev +xorg-x11-drv-intel +xorg-x11-drv-libinput +xorg-x11-drv-nouveau +xorg-x11-drv-qxl +xorg-x11-drv-synaptics-legacy +xorg-x11-drv-v4l +xorg-x11-drv-vesa +xorg-x11-drv-vmware +xorg-x11-drv-wacom +xorg-x11-fonts +xorg-x11-fonts-others +xorg-x11-font-utils +xorg-x11-server +xorg-x11-server-utils +xorg-x11-server-Xephyr +xorg-x11-server-Xspice +xorg-x11-util-macros +xorg-x11-utils +xorg-x11-xauth +xorg-x11-xbitmaps +xorg-x11-xinit +xorg-x11-xkb-utils +adwaita-icon-theme +atk +atkmm +at-spi2-atk +at-spi2-core +baobab +abattis-cantarell-fonts +cheese +clutter +clutter-gst3 +clutter-gtk +cogl +dconf +dconf-editor +devhelp +eog +epiphany +evince +evolution-data-server +file-roller +folks +gcab +gcr +gdk-pixbuf2 +gdm +gedit +geocode-glib +gfbgraph +gjs +glib2 +glibmm24 +glib-networking +gmime30 +gnome-autoar +gnome-backgrounds +gnome-bluetooth +gnome-boxes +gnome-builder +gnome-calculator +gnome-calendar +gnome-characters +gnome-clocks +gnome-color-manager +gnome-contacts +gnome-control-center +gnome-desktop3 +gnome-disk-utility +gnome-font-viewer +gnome-getting-started-docs +gnome-initial-setup +gnome-keyring +gnome-logs +gnome-menus +gnome-music +gnome-online-accounts +gnome-online-miners +gnome-photos +gnome-remote-desktop +gnome-screenshot +gnome-session +gnome-settings-daemon +gnome-shell +gnome-shell-extensions +gnome-software +gnome-system-monitor +gnome-terminal +gnome-tour +gnome-user-docs +gnome-user-share +gnome-video-effects +gnome-weather +gobject-introspection +gom +grilo +grilo-plugins +gsettings-desktop-schemas +gsound +gspell +gssdp +gtk3 +gtk4 +gtk-doc +gtkmm30 +gtksourceview4 +gtk-vnc2 +gupnp +gupnp-av +gupnp-dlna +gvfs +json-glib +libchamplain +libdazzle +libgdata +libgee +libgnomekbd +libgsf +libgtop2 +libgweather +libgxps +libhandy +libmediaart +libnma +libnotify +libpeas +librsvg2 +libsecret +libsigc++20 +libsoup +mm-common +mutter +nautilus +orca +pango +pangomm +libphodav +python3-pyatspi +python3-gobject +rest +rygel +simple-scan +sushi +sysprof +tepl +totem +totem-pl-parser +tracker3 +tracker3-miners +vala +vte291 +yelp +yelp-tools +yelp-xsl +zenity +ibus-libpinyin +openEuler-repos diff --git a/scripts/configs-rpi/rpmlist-ukui b/scripts/configs-rpi/rpmlist-ukui new file mode 100644 index 0000000..f725d59 --- /dev/null +++ b/scripts/configs-rpi/rpmlist-ukui @@ -0,0 +1,29 @@ +dnf +alsa-utils +haveged +wpa_supplicant +vim +net-tools +iproute +iputils +NetworkManager +NetworkManager-wifi +NetworkManager-wwan +NetworkManager-bluetooth +NetworkManager-ovs +NetworkManager-ppp +openssh-server +openssh-clients +passwd +hostname +bluez +pulseaudio-module-bluetooth +parted +raspberrypi-firmware +raspberrypi-bluetooth +sudo +ukui +firefox +bc +systemd-timesyncd +openEuler-repos diff --git a/scripts/configs-rpi/rpmlist-xfce b/scripts/configs-rpi/rpmlist-xfce new file mode 100644 index 0000000..3b0a32d --- /dev/null +++ b/scripts/configs-rpi/rpmlist-xfce @@ -0,0 +1,46 @@ +dnf +alsa-utils +haveged +wpa_supplicant +vim +net-tools +iproute +iputils +NetworkManager +NetworkManager-wifi +NetworkManager-wwan +NetworkManager-bluetooth +NetworkManager-ovs +NetworkManager-ppp +openssh-server +openssh-clients +passwd +hostname +bluez +pulseaudio-module-bluetooth +parted +raspberrypi-firmware +raspberrypi-bluetooth +sudo +dejavu-fonts +liberation-fonts +gnu-*-fonts +google-*-fonts +xorg-* +xfwm4 +xfdesktop +xfce4-* +xfce4-*-plugin +network-manager-applet +*fonts +fcitx +fcitx-qt5 +fcitx-cloudpinyin +fcitx-sunpinyin +fcitx-configtool +lightdm +lightdm-gtk +firefox +bc +systemd-timesyncd +openEuler-repos diff --git a/scripts/configs/chroot.sh b/scripts/configs/chroot.sh new file mode 100644 index 0000000..05778ea --- /dev/null +++ b/scripts/configs/chroot.sh @@ -0,0 +1,7 @@ +#!/bin/bash + +echo 'openeuler' | passwd --stdin root +echo openEuler > /etc/hostname +ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime +chkconfig --add extend-root.sh +chkconfig extend-root.sh on \ No newline at end of file diff --git a/scripts/bin/extend-root.sh b/scripts/configs/extend-root.sh old mode 100644 new mode 100755 similarity index 100% rename from scripts/bin/extend-root.sh rename to scripts/configs/extend-root.sh diff --git a/scripts/configs/ifcfg-eth0 b/scripts/configs/ifcfg-eth0 new file mode 100644 index 0000000..c91969b --- /dev/null +++ b/scripts/configs/ifcfg-eth0 @@ -0,0 +1,16 @@ +TYPE=Ethernet +PROXY_METHOD=none +BROWSER_ONLY=no +BOOTPROTO=dhcp +DEFROUTE=yes +IPV4_FAILURE_FATAL=no +IPV6INIT=yes +IPV6_AUTOCONF=yes +IPV6_DEFROUTE=yes +IPV6_FAILURE_FATAL=no +IPV6_ADDR_GEN_MODE=stable-privacy +NAME=eth0 +UUID=851a6f36-e65c-3a43-8f4a-78fd0fc09dc9 +ONBOOT=yes +AUTOCONNECT_PRIORITY=-999 +DEVICE=eth0 \ No newline at end of file diff --git a/scripts/configs/resolv.conf b/scripts/configs/resolv.conf new file mode 100644 index 0000000..ac2479e --- /dev/null +++ b/scripts/configs/resolv.conf @@ -0,0 +1,3 @@ +nameserver 8.8.8.8 +nameserver 8.8.4.4 +nameserver 114.114.114.114 \ No newline at end of file diff --git a/scripts/gen_image-x86_64.sh b/scripts/gen_image-x86_64.sh old mode 100644 new mode 100755 index 97fd960..adef7a1 --- a/scripts/gen_image-x86_64.sh +++ b/scripts/gen_image-x86_64.sh @@ -1,8 +1,10 @@ #!/bin/bash +set -e +set -x __usage=" Usage: gen_image [OPTIONS] -Generate Rockchip bootable image. +Generate openEuler bootable image. The target compressed bootable images will be generated in the build/YYYY-MM-DD folder of the directory where the gen_image.sh script is located. Options: @@ -79,4 +81,4 @@ default_param prepare_bin prepare_img make_img -echo "image" >> $workdir/.done +echo "image" >> ${workdir}/.done diff --git a/scripts/gen_image.sh b/scripts/gen_image.sh index e2483bf..5263e0f 100755 --- a/scripts/gen_image.sh +++ b/scripts/gen_image.sh @@ -1,12 +1,14 @@ #!/bin/bash +set -e +set -x __usage=" Usage: gen_image [OPTIONS] -Generate Rockchip bootable image. +Generate openEuler bootable image. The target compressed bootable images will be generated in the build/YYYY-MM-DD folder of the directory where the gen_image.sh script is located. Options: - -n, --name IMAGE_NAME The Rockchip image name to be built. + -n, --name IMAGE_NAME The openEuler image name to be built. --board BOARD_CONFIG Required! The config of target board in the boards folder, which defaults to firefly-rk3399. -h, --help Show command help. " @@ -24,6 +26,8 @@ default_param() { board=firefly-rk3399 soc_name=rk3399 platform=rockchip + nonfree_bin_dir=${cur_dir}/bin + config_dir=${cur_dir}/configs rootfs_dir=${workdir}/rootfs boot_dir=${workdir}/boot uboot_dir=${workdir}/u-boot @@ -47,6 +51,9 @@ parseargs() shift elif [ "x$1" == "x-n" -o "x$1" == "x--name" ]; then name=`echo $2` + if [ "x${name:0-4}" == "x.img" ]; then + name=${name::-4} + fi shift shift elif [ "x$1" == "x--board" ]; then @@ -122,15 +129,13 @@ LOG(){ } make_img(){ - cd $workdir - - if [[ -f $workdir/boot.img && $(cat $workdir/.done | grep bootimg) == "bootimg" ]];then + if [[ -f ${workdir}/boot.img && $(cat ${workdir}/.done | grep bootimg) == "bootimg" ]];then LOG "boot.img check done." else ERROR "boot.img check failed, please re-run build_boot.sh." exit 2 fi - if [[ -f $workdir/rootfs.img && $(cat $workdir/.done | grep rootfs) == "rootfs" ]];then + if [[ -f ${workdir}/rootfs.img && $(cat ${workdir}/.done | grep rootfs) == "rootfs" ]];then LOG "rootfs.img check done." else ERROR "rootfs.img check failed, please re-run build_rootfs.sh." @@ -143,16 +148,25 @@ make_img(){ size=$(($size+1100)) losetup -D img_file=${workdir}/${name}.img + LOG create ${img_file} size of ${size}MiB dd if=/dev/zero of=${img_file} bs=1MiB count=$size status=progress && sync LOG "create ${part_table} partition table." - parted ${img_file} mklabel ${part_table} mkpart primary fat32 32768s 524287s - + if [ "x${board}" == "xraspberrypi" ]; then + section1_start=16384 + section1_end=1064959 + else + section1_start=32768 + section1_end=524287 + fi + parted ${img_file} mklabel ${part_table} mkpart primary fat32 ${section1_start}s ${section1_end}s parted ${img_file} -s set 1 boot on - parted ${img_file} mkpart primary ext4 524288s 100% + parted ${img_file} mkpart primary ext4 $(($section1_end+1))s 100% device=`losetup -f --show -P ${img_file}` + LOG "after losetup: ${device}" trap 'LOSETUP_D_IMG' EXIT + LOG "image ${img_file} created and mounted as ${device}" kpartx -va ${device} loopX=${device##*\/} partprobe ${device} @@ -170,25 +184,40 @@ make_img(){ if [ -d ${rootfs_dir} ];then rm -rf ${rootfs_dir}; fi mkdir ${rootfs_dir} - mount $workdir/rootfs.img ${rootfs_dir} + mount ${workdir}/rootfs.img ${rootfs_dir} if [ -d ${boot_dir} ];then rm -rf ${boot_dir}; fi mkdir ${boot_dir} - mount $workdir/boot.img ${boot_dir} + mount ${workdir}/boot.img ${boot_dir} + + cp -rfp ${boot_dir}/* ${boot_mnt} || LOG "${boot_dir} is empty." - cp -rfp ${boot_dir}/* ${boot_mnt} line=$(blkid | grep $rootp) - uuid=${line#*UUID=\"} - uuid=${uuid%%\"*} - sed -i "s|UUID=614e0000-0000-4b53-8000-1d28000054a9|UUID=${uuid}|g" ${boot_mnt}/extlinux/extlinux.conf + if [ "x${board}" == "xraspberrypi" ]; then + if [ -d ${rootfs_dir}/boot/grub2 ]; then + rm -rf ${rootfs_dir}/boot/grub2 + fi + cp -rfp ${rootfs_dir}/boot/* ${boot_mnt}/ || LOG "no file in ${rootfs_dir}/boot/" + cp ${config_dir}/config.txt ${boot_mnt}/ + + partuuid=${line#*PARTUUID=\"} + partuuid=${partuuid%%\"*} + echo "console=serial0,115200 console=tty1 root=PARTUUID=${partuuid} rootfstype=ext4 elevator=deadline rootwait net.ifnames=0" > ${boot_mnt}/cmdline.txt + else + uuid=${line#*UUID=\"} + uuid=${uuid%%\"*} + sed -i "s|UUID=614e0000-0000-4b53-8000-1d28000054a9|UUID=${uuid}|g" ${boot_mnt}/extlinux/extlinux.conf + fi rsync -avHAXq ${rootfs_dir}/* ${root_mnt} sync sleep 10 LOG "copy openEuler-root done." - if [ -d ${root_mnt}/lib/modules ];then rm -rf ${root_mnt}/lib/modules; fi - cp -rfp $workdir/kernel/kernel-modules/lib/modules ${root_mnt}/lib - LOG "install kernel modules done." + if [ -d ${workdir}/kernel/kernel-modules/lib/modules ]; then + if [ -d ${root_mnt}/lib/modules ];then rm -rf ${root_mnt}/lib/modules; fi + cp -rfp ${workdir}/kernel/kernel-modules/lib/modules ${root_mnt}/lib + LOG "install kernel modules done." + fi umount $rootp umount $bootp @@ -230,7 +259,7 @@ make_img(){ ERROR "allwinner u-boot file can not be found!" exit 2 fi - else + elif [ "${platform}" != "broadcom" ];then echo "Unsupported platform" fi @@ -241,18 +270,12 @@ make_img(){ } outputd(){ - cd $workdir - - if [ -f $outputdir ];then - img_name_check=$(ls $outputdir | grep $name) - if [ "x$img_name_check" != "x" ]; then - rm ${name}.img* - rm ${name}.tar.gz* - fi + if [ -d ${outputdir} ];then + find ${outputdir} -name "${name}.img" -o -name "${name}.tar.gz" -o -name "${name}.img.xz" -delete else mkdir -p $outputdir fi - mv ${name}.img ${outputdir} + mv ${workdir}/${name}.img ${outputdir} LOG "xz openEuler image begin..." xz ${outputdir}/${name}.img if [ ! -f ${outputdir}/${name}.img.xz ]; then @@ -264,11 +287,11 @@ outputd(){ if [[ "x$soc_name" == "xrk3399" && "x$platform" == "xrockchip" ]]; then LOG "tar openEuler image begin..." - cp $workdir/../bin/rk3399_loader.bin $workdir - cp $workdir/../bin/rk3399_parameter.gpt $workdir - cp $workdir/u-boot/idbloader.img $workdir - cp $workdir/u-boot/u-boot.itb $workdir - cd $workdir + cp ${nonfree_bin_dir}/rk3399_loader.bin ${workdir} + cp ${nonfree_bin_dir}/rk3399_parameter.gpt ${workdir} + cp ${workdir}/u-boot/idbloader.img ${workdir} + cp ${workdir}/u-boot/u-boot.itb ${workdir} + pushd ${workdir} tar -zcvf ${outputdir}/${name}.tar.gz \ rk3399_loader.bin \ rk3399_parameter.gpt \ @@ -276,24 +299,27 @@ outputd(){ u-boot.itb \ boot.img \ rootfs.img + popd if [ ! -f ${outputdir}/${name}.tar.gz ]; then ERROR "tar openEuler image failed!" exit 2 else LOG "tar openEuler image success." fi - rm $workdir/rk3399_loader.bin - rm $workdir/rk3399_parameter.gpt - rm $workdir/idbloader.img - rm $workdir/u-boot.itb + rm ${workdir}/rk3399_loader.bin + rm ${workdir}/rk3399_parameter.gpt + rm ${workdir}/idbloader.img + rm ${workdir}/u-boot.itb - cd $outputdir + pushd $outputdir sha256sum ${name}.tar.gz >> ${name}.tar.gz.sha256sum + popd fi - cd $outputdir + pushd $outputdir sha256sum ${name}.img.xz >> ${name}.img.xz.sha256sum + popd - LOG "The target images are generated in the ${outputdir}." + LOG "The target images: ${outputdir}/${name}.img.xz." } set -e @@ -301,18 +327,22 @@ cur_dir=$(cd $(dirname $0);pwd) default_param parseargs "$@" || help $? -if [ ! -d $workdir ]; then - mkdir $workdir +if [ "x${board}" == "xraspberrypi" ]; then + config_dir=${cur_dir}/configs-rpi fi -source $cur_dir/boards/${board}.conf +if [ ! -d ${workdir} ]; then + mkdir ${workdir} +fi + +source ${cur_dir}/boards/${board}.conf if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi -if [ ! -f $workdir/.done ];then - touch $workdir/.done +if [ ! -f ${workdir}/.done ];then + touch ${workdir}/.done fi -sed -i 's/image//g' $workdir/.done +sed -i 's/image//g' ${workdir}/.done LOG "gen image..." make_img outputd -echo "image" >> $workdir/.done +echo "image" >> ${workdir}/.done