diff --git a/documents/瑞芯微等开发板.md b/documents/瑞芯微等开发板.md index a14b0f2..716370d 100644 --- a/documents/瑞芯微等开发板.md +++ b/documents/瑞芯微等开发板.md @@ -62,7 +62,7 @@ 构建镜像需执行命令： -`sudo bash build.sh -n NAME -k KERNEL_URL -b KERNEL_BRANCH -u UBOOT_DEFCONFIG -c KERNEL_DEFCONFIG -r REPO_INFO -d DTB_NAME -p PLATFORM -s SPEC --cores N` +`sudo bash build.sh --board BOARD -n NAME -k KERNEL_URL -b KERNEL_BRANCH -c KERNEL_DEFCONFIG -r REPO_INFO -s SPEC --cores N` **说明: 基于 build.sh 提供的默认参数，执行 sudo bash build.sh 可构建 Firefly-RK3399 的 openEuler-20.03-LTS 镜像。** @@ -80,15 +80,33 @@ 各个参数意义： -1. -n, --name IMAGE_NAME +1. --board BOARD + + 适用的开发板的版型配置文件在 [boards](../scripts/rockchip/boards) 文件夹中，示例文件 [sample.conf](../scripts/rockchip/boards/sample.conf)，默认为 `firefly-rk3399`。 + + 其包括的配置参数意义如下： + + - platform=PLATFORM + + 开发板所使用的平台，目前支持的平台有：rockchip、phytium，默认为 `rockchip`。 + + - device-tree=DTB_NAME + + 内核设备树中的设备名称，和开发板名称有一点区别，对应 [kernel/arch/arm64/boot/dts/rockchip](https://gitee.com/openeuler/kernel/tree/master/arch/arm64/boot/dts/rockchip) 下的 `DTB_NAME.dts` 文件，默认为 `rk3399-firefly`。 + + - ubootconfig=UBOOT_DEFCONFIG + + 开发板对应的 defconfig 的文件名称，对应 [u-boot/configs](https://github.com/u-boot/u-boot/tree/master/configs) 下 `UBOOT_DEFCONFIG` 文件，默认为 `firefly-rk3399_defconfig`；如需在 RK3588 开发板上使用预编译的 u-boot，可以将此项设置为 `none`。 + +2. -n, --name IMAGE_NAME 构建的镜像名称，例如：`openEuler-20.03-LTS-Firefly-RK3399-aarch64-alpha1` 或 `openEuler-21.09-Firefly-RK3399-aarch64-alpha1`。 -2. -k, --kernel KERNEL_URL +3. -k, --kernel KERNEL_URL 内核源码仓库的项目地址，默认为 `https://gitee.com/openeuler/rockchip-kernel.git`。可根据需要设置为 `git@gitee.com:openeuler/rockchip-kernel.git` 或 `git@gitee.com:openeuler/kernel.git`。 -3. -b, --branch KERNEL_BRANCH +4. -b, --branch KERNEL_BRANCH 内核源码的对应分支，默认为 openEuler-20.03-LTS。根据 -k 参数有以下选择： @@ -97,10 +115,6 @@ - -k https://gitee.com/openeuler/kernel.git - openEuler-21.09 -4. -u, --ubootconfig UBOOT_DEFCONFIG - - 开发板对应的 defconfig 的文件名称，对应 [u-boot/configs](https://github.com/u-boot/u-boot/tree/master/configs) 下 `UBOOT_DEFCONFIG` 文件，默认为 `firefly-rk3399_defconfig`；如需在 RK3588 开发板上使用预编译的 u-boot，可以将此项设置为 `none`。 - 5. -c, --config KERNEL_DEFCONFIG 内核编译使用的配置文件名称或路径，默认为 `openeuler-raspi_defconfig`。如果该参数为配置文件名称，请确保该文件在内核源码的目录 arch/arm64/configs 下。 @@ -117,15 +131,7 @@ - 资源库的 baseurl 列表，如 `http://repo.openeuler.org/openEuler-20.03-LTS/OS/aarch64/ http://repo.openeuler.org/openEuler-20.03-LTS/EPOL/aarch64/`。 -7. -d, --device-tree DTB_NAME - - 内核设备树中的设备名称，和开发板名称有一点区别，对应 [kernel/arch/arm64/boot/dts/rockchip](https://gitee.com/openeuler/kernel/tree/master/arch/arm64/boot/dts/rockchip) 下的 `DTB_NAME.dts` 文件，默认为 `rk3399-firefly`。 - -8. -p, --platform PLATFORM - - 开发板所使用的平台，目前支持的平台有：rockchip、phytium，默认为 `rockchip`。 - -9. -s, --spec SPEC +7. -s, --spec SPEC 构建的镜像版本： - `headless`，无图形界面版的镜像。 @@ -136,11 +142,11 @@ 默认使用 `headless` 选项。 -10. --cores N +8. --cores N 并行编译的数量，根据运行脚本的宿主机 CPU 实际数目设定，默认为可用的 CPU 总数。 -11. -h, --help +9. -h, --help 显示帮助信息。 @@ -154,23 +160,23 @@ - openEuler-20.03-LTS，构建命令如下: - `sudo bash build.sh -n openEuler-20.03-LTS-Firefly-RK3399-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-20.03-LTS -u firefly-rk3399_defconfig -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo -d rk3399-firefly -p rockchip -s headless` + `sudo bash build.sh --board firefly-rk3399 -n openEuler-20.03-LTS-Firefly-RK3399-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-20.03-LTS -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo -s headless` - openEuler-22.03-LTS-SP3，构建命令如下： - `sudo bash build.sh -n openEuler-22.03-LTS-SP3-Firefly-RK3399-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP3 -u firefly-rk3399_defconfig -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP3/generic.repo -d rk3399-firefly -p rockchip -s headless` + `sudo bash build.sh --board firefly-rk3399 -n openEuler-22.03-LTS-SP3-Firefly-RK3399-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP3 -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP3/generic.repo -s headless` -2. RockPi-4A +2. Radxa RockPi-4A 已测试的版本如下： - openEuler-20.03-LTS，构建命令如下: - `sudo bash build.sh -n openEuler-20.03-LTS-RockPi-4A-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-20.03-LTS -u rock-pi-4-rk3399_defconfig -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo -d rk3399-rock-pi-4a -p rockchip -s headless` + `sudo bash build.sh --board radxa-rockpi-4a -n openEuler-20.03-LTS-RockPi-4A-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-20.03-LTS -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo -s headless` - openEuler-22.03-LTS，构建命令如下： - `sudo bash build.sh -n openEuler-22.03-LTS-RockPi-4A-aarch64-alpha1 -k https://gitee.com/openeuler/kernel.git -b openEuler-22.03-LTS -u rock-pi-4-rk3399_defconfig -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS/generic.repo -d rk3399-rock-pi-4a -p rockchip -s headless` + `sudo bash build.sh --board radxa-rockpi-4a -n openEuler-22.03-LTS-RockPi-4A-aarch64-alpha1 -k https://gitee.com/openeuler/kernel.git -b openEuler-22.03-LTS -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS/generic.repo -s headless` 适用的 RK3588 开发板: @@ -182,7 +188,7 @@ - openEuler-22.03-LTS，构建命令如下: - `sudo bash build.sh -n openEuler-22.03-RK3588-Firefly-ITX-3588J-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-RK3588 -u none -c openeuler_rk3588_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS/generic.repo -d rk3588-firefly-itx-3588j -p rockchip -s headless` + `sudo bash build.sh --board firefly-itx-3588j -n openEuler-22.03-RK3588-Firefly-ITX-3588J-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-RK3588 -c openeuler_rk3588_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS/generic.repo -s headless` 2. Firefly ROC-RK3588S-PC @@ -190,7 +196,7 @@ - openEuler-22.03-LTS-SP3，构建命令如下: - `sudo bash build.sh -n openEuler-22.03-LTS-SP3-Station-M3-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP3 -u none -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP3/generic.repo -d rk3588s-roc-pc -p rockchip -s headless` + `sudo bash build.sh --board firefly-roc-rk3588s-pc -n openEuler-22.03-LTS-SP3-Station-M3-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP3 -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP3/generic.repo -s headless` 3. Radxa Rock-5B @@ -198,7 +204,7 @@ - openEuler-22.03-LTS-SP3，构建命令如下: - `sudo bash build.sh -n openEuler-22.03-LTS-SP3-Rock5B-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP3 -u none -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP3/generic.repo -d rk3588-rock-5b -p rockchip -s headless` + `sudo bash build.sh --board radxa-rock-5b -n openEuler-22.03-LTS-SP3-Rock5B-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP3 -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP3/generic.repo -s headless` 适用的 RK356X 开发板: @@ -210,15 +216,15 @@ - openEuler-22.03-LTS-SP2，构建命令如下: - `sudo bash build.sh -n openEuler-22.03-LTS-SP2-Station-M2-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP2 -u none -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP2/generic.repo -d rk3566-roc-pc -p rockchip -s headless` + `sudo bash build.sh --board firefly-roc-rk3566-pc -n openEuler-22.03-LTS-SP2-Station-M2-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP2 -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP2/generic.repo -s headless` - openEuler-22.03-LTS-SP3，构建命令如下: - `sudo bash build.sh -n openEuler-22.03-LTS-SP3-Station-M2-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP3 -u none -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP3/generic.repo -d rk3566-roc-pc -p rockchip -s headless` + `sudo bash build.sh --board firefly-roc-rk3566-pc -n openEuler-22.03-LTS-SP3-Station-M2-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP3 -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP3/generic.repo -s headless` - openEuler-24.03-LTS，构建命令如下: - `sudo bash build.sh -n openEuler-24.03-LTS-Station-M2-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-24.03-LTS -u none -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-24.03-LTS/generic.repo -d rk3566-roc-pc -p rockchip -s headless` + `sudo bash build.sh --board firefly-roc-rk3566-pc -n openEuler-24.03-LTS-Station-M2-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-24.03-LTS -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-24.03-LTS/generic.repo -s headless` 2. Firefly ROC-RK3568-PC-SE @@ -226,11 +232,11 @@ - openEuler-22.03-LTS-SP2，构建命令如下: - `sudo bash build.sh -n openEuler-22.03-LTS-SP2-ROC-RK3568-PC-SE-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP2 -u none -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP2/generic.repo -d rk3568-roc-pc-se -p rockchip -s headless` + `sudo bash build.sh --board firefly-roc-rk3568-pc-se -n openEuler-22.03-LTS-SP2-ROC-RK3568-PC-SE-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP2 -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP2/generic.repo -s headless` - openEuler-22.03-LTS-SP3，构建命令如下: - `sudo bash build.sh -n openEuler-22.03-LTS-SP3-ROC-RK3568-PC-SE-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP3 -u none -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP3/generic.repo -d rk3568-roc-pc-se -p rockchip -s headless` + `sudo bash build.sh --board firefly-rk3568-pc-se -n openEuler-22.03-LTS-SP3-ROC-RK3568-PC-SE-aarch64-alpha1 -k https://gitee.com/openeuler/rockchip-kernel.git -b openEuler-22.03-LTS-SP3 -c openeuler_rockchip_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS-SP3/generic.repo -s headless` 适用的 Phytium 开发板: @@ -242,11 +248,11 @@ - openEuler-22.03-LTS-SP3，构建命令如下: - `sudo bash build.sh -n openEuler-22.03-LTS-PhytiumPi-4GB-aarch64-alpha1 -k https://gitee.com/openeuler/phytium-kernel.git -b openEuler-22.03-LTS-Phytium -u none -c phytium_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS/generic.repo -d phytiumpi_firefly -p phytium -s headless` + `sudo bash build.sh --board phytiumpi-4gb -n openEuler-22.03-LTS-PhytiumPi-4GB-aarch64-alpha1 -k https://gitee.com/openeuler/phytium-kernel.git -b openEuler-22.03-LTS-Phytium -c phytium_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-22.03-LTS/generic.repo -s headless` - openEuler-24.03-LTS，构建命令如下: - `sudo bash build.sh -n openEuler-24.03-LTS-PhytiumPi-4GB-aarch64-alpha1 -k https://gitee.com/openeuler/phytium-kernel.git -b openEuler-24.03-LTS-Phytium -u none -c phytium_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-24.03-LTS/generic.repo -d phytiumpi_firefly -p phytium -s headless` + `sudo bash build.sh --board phytium-4gb -n openEuler-24.03-LTS-PhytiumPi-4GB-aarch64-alpha1 -k https://gitee.com/openeuler/phytium-kernel.git -b openEuler-24.03-LTS-Phytium -c phytium_defconfig -r https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-24.03-LTS/generic.repo -s headless` ### 顺序构建 diff --git a/scripts/rockchip/boards/firefly-itx-3588j.conf b/scripts/rockchip/boards/firefly-itx-3588j.conf new file mode 100644 index 0000000..4a770a3 --- /dev/null +++ b/scripts/rockchip/boards/firefly-itx-3588j.conf @@ -0,0 +1,3 @@ +ubootconfig=none +dtb_name=rk3588-firefly-itx-3588j +platform=rockchip \ No newline at end of file diff --git a/scripts/rockchip/boards/firefly-rk3399.conf b/scripts/rockchip/boards/firefly-rk3399.conf new file mode 100644 index 0000000..484ca1b --- /dev/null +++ b/scripts/rockchip/boards/firefly-rk3399.conf @@ -0,0 +1,3 @@ +ubootconfig=firefly-rk3399_defconfig +dtb_name=rk3399-firefly +platform=rockchip \ No newline at end of file diff --git a/scripts/rockchip/boards/firefly-roc-rk3566-pc.conf b/scripts/rockchip/boards/firefly-roc-rk3566-pc.conf new file mode 100644 index 0000000..df492a3 --- /dev/null +++ b/scripts/rockchip/boards/firefly-roc-rk3566-pc.conf @@ -0,0 +1,3 @@ +ubootconfig=none +dtb_name=rk3566-roc-pc +platform=rockchip \ No newline at end of file diff --git a/scripts/rockchip/boards/firefly-roc-rk3568-pc-se.conf b/scripts/rockchip/boards/firefly-roc-rk3568-pc-se.conf new file mode 100644 index 0000000..3bbddcb --- /dev/null +++ b/scripts/rockchip/boards/firefly-roc-rk3568-pc-se.conf @@ -0,0 +1,3 @@ +ubootconfig=none +dtb_name=rk3568-roc-pc-se +platform=rockchip \ No newline at end of file diff --git a/scripts/rockchip/boards/firefly-roc-rk3588s-pc.conf b/scripts/rockchip/boards/firefly-roc-rk3588s-pc.conf new file mode 100644 index 0000000..7759a98 --- /dev/null +++ b/scripts/rockchip/boards/firefly-roc-rk3588s-pc.conf @@ -0,0 +1,3 @@ +ubootconfig=none +dtb_name=rk3588s-roc-pc +platform=rockchip \ No newline at end of file diff --git a/scripts/rockchip/boards/phytiumpi-4gb.conf b/scripts/rockchip/boards/phytiumpi-4gb.conf new file mode 100644 index 0000000..678f8b0 --- /dev/null +++ b/scripts/rockchip/boards/phytiumpi-4gb.conf @@ -0,0 +1,3 @@ +ubootconfig=none +dtb_name=phytiumpi_firefly +platform=rockchip \ No newline at end of file diff --git a/scripts/rockchip/boards/radxa-rock5b.conf b/scripts/rockchip/boards/radxa-rock5b.conf new file mode 100644 index 0000000..db3b921 --- /dev/null +++ b/scripts/rockchip/boards/radxa-rock5b.conf @@ -0,0 +1,3 @@ +ubootconfig=none +dtb_name=rk3588-rock-5b +platform=rockchip \ No newline at end of file diff --git a/scripts/rockchip/boards/radxa-rockpi-4a.conf b/scripts/rockchip/boards/radxa-rockpi-4a.conf new file mode 100644 index 0000000..55a452c --- /dev/null +++ b/scripts/rockchip/boards/radxa-rockpi-4a.conf @@ -0,0 +1,3 @@ +ubootconfig=rock-pi-4-rk3399_defconfig +dtb_name=rk3399-rock-pi-4a +platform=rockchip \ No newline at end of file diff --git a/scripts/rockchip/boards/sample.conf b/scripts/rockchip/boards/sample.conf new file mode 100644 index 0000000..2e8d5e4 --- /dev/null +++ b/scripts/rockchip/boards/sample.conf @@ -0,0 +1,3 @@ +ubootconfig=firefly-rk3399_defconfig #Required! The name of defconfig file when compiling u-boot, which defaults to firefly-rk3399_defconfig. +dtb_name=rk3399-firefly #Required! The device tree name of target board, which defaults to rk3399-firefly. +platform=rockchip #Required! The platform of target board, which defaults to rockchip. \ No newline at end of file diff --git a/scripts/rockchip/build.sh b/scripts/rockchip/build.sh index f93cb9d..844383c 100755 --- a/scripts/rockchip/build.sh +++ b/scripts/rockchip/build.sh @@ -6,14 +6,12 @@ Build Rockchip bootable images. The target bootable compressed images will be generated in the build/YYYY-MM-DD folder of the directory where the build script is located. Options: + --board BOARD Required! The config of target board in the boards folder, which defaults to rockchip. -n, --name IMAGE_NAME The Rockchip image name to be built. -k, --kernel KERNEL_URL The URL of kernel source's repository, which defaults to https://gitee.com/openeuler/rockchip-kernel.git. -b, --branch KERNEL_BRANCH The branch name of kernel source's repository, which defaults to openEuler-20.03-LTS. -c, --config KERNEL_DEFCONFIG The name/path of defconfig file when compiling kernel, which defaults to openeuler_rockchip_defconfig. - -u, --ubootconfig UBOOT_DEFCONFIG Required! The name of defconfig file when compiling u-boot, which defaults to firefly-rk3399_defconfig. - -p, --platform PLATFORM Required! The platform of target board, which defaults to rockchip. -r, --repo REPO_INFO The URL/path of target repo file or list of repo's baseurls which should be a space separated list. - -d, --device-tree DTB_NAME Required! The device tree name of target board, which defaults to rk3399-firefly. -s, --spec SPEC The image's specification: headless, xfce, ukui, dde or the file path of rpmlist. The default is headless. --cores N The number of cpu cores to be used during making. -h, --help Show command help. @@ -30,16 +28,15 @@ used_param() { echo "Default args" echo "KERNEL_DEFCONFIG : $default_defconfig" echo "" - echo "DTB_NAME : $dtb_name" + echo "TARGET_BOARD : $board" echo "" echo "KERNEL_BRANCH : $branch" echo "" - echo "PLATFORM : $platform" - echo "" } default_param() { default_defconfig=openeuler_rockchip_defconfig + board=firefly-rk3399 ubootconfig=firefly-rk3399_defconfig dtb_name=rk3399-firefly platform=rockchip @@ -86,6 +83,10 @@ parseargs() return 1 elif [ "x$1" == "x" ]; then shift + elif [ "x$1" == "x--board" ]; then + board=`echo $2` + shift + shift elif [ "x$1" == "x-n" -o "x$1" == "x--name" ]; then name=`echo $2` shift @@ -94,10 +95,6 @@ parseargs() kernel_url=`echo $2` shift shift - elif [ "x$1" == "x-p" -o "x$1" == "x--platform" ]; then - platform=`echo $2` - shift - shift elif [ "x$1" == "x-b" -o "x$1" == "x--branch" ]; then branch=`echo $2` shift @@ -106,18 +103,10 @@ parseargs() default_defconfig=`echo $2` shift shift - elif [ "x$1" == "x-u" -o "x$1" == "x--ubootconfig" ]; then - ubootconfig=`echo $2` - shift - shift elif [ "x$1" == "x-r" -o "x$1" == "x--repo" ]; then repo_file=`echo $2` shift shift - elif [ "x$1" == "x-d" -o "x$1" == "x--device-tree" ]; then - dtb_name=`echo $2` - shift - shift elif [ "x$1" == "x-s" -o "x$1" == "x--spec" ]; then spec_param=`echo $2` shift @@ -146,6 +135,15 @@ LOG(){ default_param parseargs "$@" || help $? + +LOG "Selected board: ${board}." + +source boards/${board}.conf + +LOG "U-Boot config: ${ubootconfig}." +LOG "DeviceTree name: ${dtb_name}." +LOG "Target platform: ${platform}." + used_param if [ ! -d $workdir ]; then mkdir $workdir