provide a unified entry script to build images

README.en.md

@@ -13,6 +13,9 @@ This repository is the main repository of the openEuler SBC (Single-Board Comput
     - [How to download latest image](#how-to-download-latest-image)
         - [Raspberry Pi](#raspberry-pi)
         - [Rockchip](#rockchip)
+    - [How to build image](#how-to-build-image)
+        - [Prepare the environment](#prepare-the-environment)
+        - [Run the scripts to build image](#run-the-scripts-to-build-image)
 
 <!-- /TOC -->
 
@@ -286,4 +289,50 @@ Basic information of the image is as follows:
 <td class="cellrowborder" valign="top" width="10%"><a href="https://gitee.com/src-openeuler/openEuler-repos/blob/openEuler-22.03-LTS-SP3/generic.repo">openEuler 22.03 LTS SP3 repository</a></td>
 <td class="cellrowborder" valign="top" width="10%"><p>A compressed RAW original image</p></td>
 </tr>
-</tbody></table>
+</tbody></table>
+
+## How to build image
+
+### Prepare the environment
+
+To build openEuler AArch64 image for Raspberry Pi, Rockchip or other SoCs, the requirements of running scripts of this repository are as follows:
+
+- OS: openEuler or CentOS 8
+- Hardware: AArch64 hardware, such as Raspberry Pi, Firefly RK3399, Firefly ROC-RK3588S-PC
+
+For other architecture hardware, you can use [QEMU](https://www.qemu.org/) to build AArch64 system emulation.
+
+### Run the scripts to build image
+
+You can use the respective scripts of Raspberry Pi, Rockchip or other SoCs to build images. Refer to the specific documentation:
+- [Build Raspberry Pi images](./documents/树莓派.md#构建镜像)
+- [Build images for Rochchip and other SoCs](./documents/瑞芯微等开发板.md#镜像构建)
+
+Alternatively, you can use the unified entry point [build.sh](./scripts/build.sh) to build images for Raspberry Pi, Rockchip or other SoCs by executing the following command:
+
+`sudo bash scripts/build.sh --board BOARD_TYPE --in-docker [other_args...]`
+
+Parameter Definitions & Meaning:
+
+1. `--in-docker`
+   Build the image using a Docker container. Refer to the links below:
+   - [Build Raspberry Pi images in Docker](./documents/树莓派.md#docker-容器内构建)
+   - [Build images for Rockchip or other SoCs in Docker](./documents/瑞芯微等开发板.md#docker-容器内构建)
+
+2. `--board BOARD_TYPE`
+   Specifies the development board type. Currently supported parameters include:
+
+   - `rpi`: Build a Raspberry Pi image without compiling the kernel. For other parameters, refer to [Quick build for Raspberry Pi (no kernel compilation)](./documents/树莓派.md#快速构建无需编译内核推荐).
+   - `rpi-custom`: Build a Raspberry Pi image with kernel compilation. For other parameters, refer to [Build a Raspberry Pi image using a custom-compiled kernel](./documents/树莓派.md#完全构建包括编译内核).
+   - `firefly-itx-3588j`: Build a Firefly ITX-3588J image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建).
+   - `firefly-rk3399`: Build a Firefly RK3399 image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建).
+   - `firefly-roc-rk3566-pc`: Build a Firefly ROC-RK3566-PC image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建).
+   - `firefly-roc-rk3568-pc`: Build a Firefly ROC-RK3568-PC image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建).
+   - `firefly-roc-rk3568-pc-se`: Build a Firefly ROC-RK3568-PC-SE image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建).
+   - `firefly-roc-rk3588s-pc`: Build a Firefly ROC-RK3588S-PC image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建).
+   - `phytiumpi-4gb`: Build a Phytium Pi 4GB image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建).
+   - `radxa-rock5b`: Build a Radxa Rock-5B image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建).
+   - `radxa-rockpi-4a`: Build a Radxa RockPi-4A image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建).
+
+3. `-h`, `--help`
+   Display help information.

README.md

@@ -13,6 +13,9 @@
     - [最新镜像](#最新镜像)
         - [树莓派](#树莓派)
         - [瑞芯微等其他开发板](#瑞芯微等其他开发板)
+    - [镜像构建](#镜像构建)
+        - [准备环境](#准备环境)
+        - [构建镜像](#构建镜像)
 
 <!-- /TOC -->
 ## To Do List
@@ -286,3 +289,48 @@ SIG 组基本信息位于 [sig-SBC](https://gitee.com/openeuler/community/tree/m
 <td class="cellrowborder" valign="top" width="10%"><p>压缩后的 RAW 原始镜像</p></td>
 </tr>
 </tbody></table>
+
+## 镜像构建
+
+### 准备环境
+
+本仓库的脚本运行环境要求如下：
+
+- 操作系统：openEuler、CentOS 8
+- 架构：AArch64，如树莓派、 RK3399 开发板、 RK3588 开发板
+
+其他架构可以使用 [QEMU](https://www.qemu.org/) 模拟器搭建 AArch64 运行环境。
+
+### 构建镜像
+
+可以使用树莓派或瑞芯微等开发板各自的脚本构建镜像，具体文档参考：
+- [树莓派镜像构建](./documents/树莓派.md#构建镜像)
+- [瑞芯微等开发板镜像构建](./documents/瑞芯微等开发板.md#镜像构建)
+
+也可以使用统一入口 [build.sh](./scripts/build.sh) 构建树莓派或瑞芯微等开发板镜像，执行命令：
+
+`sudo bash scripts/build.sh --board BOARD_TYPE --in-docker [other_args...]`
+
+各个参数含义：
+
+1. --in-docker
+   使用 Docker 容器构建镜像，参考链接：
+   - [使用 Docker 容器构建树莓派镜像](./documents/树莓派.md#docker-容器内构建)
+   - [使用 Docker 容器构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#docker-容器内构建)
+
+2. --board BOARD_TYPE
+   开发板类型和构建方式。当前支持的参数有：
+   - rpi，无需编译内核直接构建树莓派镜像，其他参数请参考 [无需编译内核快速构建树莓派镜像](./documents/树莓派.md#快速构建无需编译内核推荐)。
+   - rpi-custom，编译内核并构建树莓派镜像，其他参数请参考 [编译内核构建树莓派镜像](./documents/树莓派.md#完全构建包括编译内核)。
+   - firefly-itx-3588j，构建 Firefly ITX-3588J 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。
+   - firefly-rk3399，构建 Firefly RK3399 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。
+   - firefly-roc-rk3566-pc，构建 Firefly ROC-RK3566-PC 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。
+   - firefly-roc-rk3568-pc，构建 Firefly ROC-RK3568-PC 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。
+   - firefly-roc-rk3568-pc-se，构建 Firefly ROC-RK3568-PC-SE 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。
+   - firefly-roc-rk3588s-pc，构建 Firefly ROC-RK3588S-PC 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。
+   - phytiumpi-4gb，构建 Phytium Pi 4GB 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。
+   - radxa-rock5b，构建 Radxa Rock-5B 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。
+   - radxa-rockpi-4a，构建 Radxa RockPi-4A 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。
+
+3. -h, --help
+   显示帮助信息。

documents/树莓派.md

@@ -13,8 +13,7 @@
         - [构建镜像](#构建镜像)
             - [快速构建（无需编译内核，推荐）](#快速构建无需编译内核推荐)
             - [完全构建（包括编译内核）](#完全构建包括编译内核)
-                - [主机上构建](#主机上构建)
+            - [Docker 容器内构建](#docker-容器内构建)
-                - [Docker 容器内构建](#docker-容器内构建)
 
 <!-- /TOC -->
 
@@ -41,8 +40,8 @@
   - [openEuler 21.09 内测版（LXDE 桌面、中文输入法）更新日志](raspberrypi/changelog/changelog-21.09-LXDE.md)
 - [scripts](../scripts/raspberrypi): 构建 openEuler 树莓派镜像的脚本
   - [快速构建（不编译内核）](../scripts/raspberrypi/build-image.sh)
-  - [主机上构建（编译内核）](../scripts/raspberrypi/build-image-common.sh)
+  - [完全构建（编译内核）](../scripts/raspberrypi/build-image-common.sh)
-  - [Docker 容器中构建（编译内核）](../scripts/raspberrypi/build-image-docker.sh)
+  - [Docker 容器中构建](../scripts/raspberrypi/build-image-docker.sh)
 
 ## 最新镜像
 
@@ -140,8 +139,6 @@
 
 包含编译内核、下载树莓派相关固件等过程，速度相对较慢。
 
-这里，提供两种构建方式。
-
 >![](public_sys-resources/icon-notice.gif) **须知：**  
 >当前支持三个 openEuler 版本，即 20.03 LTS、20.09、20.03 LTS SP1、21.03、20.03 LTS SP2、21.09、20.03 LTS SP3、22.03 LTS、22.09、22.03 LTS SP1、23.03、22.03 LTS SP2、22.03 LTS SP3、24.03 LTS、22.03 LTS SP4、24.09、24.03 LTS SP1、25.03 版本。
 >如果构建包含 Xfce/UKUI/DDE 桌面环境或者 DevStation 开发者工作站的镜像，需要注意六点：
@@ -189,13 +186,11 @@
 >    -  openEuler 25.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-25.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-25.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-25.03`。
 >6. 根据需要设置 -s/--spec，其具体意义见该参数的介绍部分。
 
-##### 主机上构建
-
 构建镜像需执行命令：
 
 `sudo bash build-image-common.sh -n IMAGE_NAME -k KERNEL_URL -b KERNEL_BRANCH -c KERNEL_DEFCONFIG -r REPO -s SPEC --cores N`
 
-脚本运行结束后，会提示镜像的存储位置，镜像默认保存在脚本运行所在目录的 `raspi_output_common/img/` 下。
+脚本运行结束后，会提示镜像的存储位置，镜像默认保存在脚本运行所在目录的 `raspi_output/img/` 下。
 
 各个参数意义：
 
@@ -244,17 +239,17 @@
 
     并行编译的数量，根据运行脚本的宿主机 CPU 实际数目设定，默认为可用的 CPU 总数。
 
-##### Docker 容器内构建
+#### Docker 容器内构建
 
 构建镜像需执行命令：
 
 `sudo bash build-image-docker.sh -d DOCKER_FILE -n IMAGE_NAME -k KERNEL_URL -b KERNEL_BRANCH -c KERNEL_DEFCONFIG -r REPO --cores N`
 
-脚本运行结束后，镜像默认保存在脚本运行所在目录的 `raspi_output_common/img/` 下。
+脚本运行结束后，镜像默认保存在脚本运行所在目录的 `raspi_output/img/` 下。
 
-注意！！！运行该脚本前，需安装 Docker 运行环境。该脚本会自动将 DOCKER_FILE 参数对应的 Docker 镜像导入本机系统中。
+注意！！！运行该脚本前，需安装 Docker 运行环境。该脚本会自动将 `-d DOCKER_FILE` 参数对应的 Docker 镜像导入本机系统中。
 
-除参数 DOCKER_FILE 外，剩余参数与[主机上构建](#主机上构建)中对应参数一致：
+除参数 `-d DOCKER_FILE` 外，剩余参数与 [快速构建（无需编译内核，推荐）](#快速构建无需编译内核推荐) 或 [完全构建（包括编译内核）](#完全构建包括编译内核) 中对应参数一致：
 
 1.  -d, --docker DOCKER_FILE
 

scripts/build.sh

@@ -0,0 +1,102 @@
+#!/bin/bash
+
+set -e
+
+usage() {
+    echo "Usage: $0 --board BOARD_TYPE --in-docker [other_args...]"
+    echo Options: 
+    echo "--in-docker           Build images in Docker."
+    echo "--board BOARD_TYPE    Supported boards:"
+    echo "  - rpi (Build a Raspberry Pi image without kernel compilation)"
+    echo "  - rpi-custom (Build a Raspberry Pi image using a custom kernel compiled)"
+    for config in "${RK_BOARDS[@]}"; do
+        echo "  - $config"
+    done
+    exit 1
+}
+
+cur_dir=$(cd $(dirname $0);pwd)
+rk_board_dir=$cur_dir/rockchip/boards
+
+BOARD=""
+HELP=false
+IN_DOCKER=false
+ARGS=()
+RK_BOARDS=()
+SUB_SCRIPT=""
+
+while IFS= read -r -d '' file; do
+    RK_BOARDS+=("$(basename "$file" .conf)")
+done < <(find "$rk_board_dir" -type f -name "*.conf" ! -name "sample.conf" -print0 | sort -z)
+
+if [ $# -eq 0 ]; then
+    usage
+fi
+
+while [[ $# -gt 0 ]]; do
+    case "$1" in
+        --board)
+            BOARD="$2"
+            shift 2
+            ;;
+        --in-docker)
+            IN_DOCKER=true
+            shift
+            ;;
+        --help)
+            HELP=true
+            ARGS+=("--help")
+            shift
+            ;;
+        *)
+            ARGS+=("$1")
+            shift
+            ;;
+    esac
+done
+
+if [ -z "$BOARD" ]; then
+    if ! $HELP; then
+        echo "Error: --board parameter is required"
+    fi
+    usage
+fi
+
+case "$BOARD" in
+    rpi)
+        if $IN_DOCKER; then
+            SUB_SCRIPT="$cur_dir/raspberrypi/build-image-docker.sh"
+        else
+            SUB_SCRIPT="$cur_dir/raspberrypi/build-image.sh"
+        fi
+        ;;
+    rpi-custom)
+        if $IN_DOCKER; then
+            SUB_SCRIPT="$cur_dir/raspberrypi/build-image-docker.sh"
+        else
+            SUB_SCRIPT="$cur_dir/raspberrypi/build-image-common.sh"
+        fi   
+        ;;
+    *)
+        for item in "${RK_BOARDS[@]}"; do
+            if [ "$item" == "$BOARD" ]; then
+                if $IN_DOCKER; then
+                    SUB_SCRIPT="$cur_dir/rockchip/build-image-docker.sh"
+                else
+                    SUB_SCRIPT="$cur_dir/rockchip/build.sh"
+                fi   
+                ARGS+=("--board")
+                ARGS+=("$BOARD")
+                break
+            fi
+        done
+        ;;
+esac
+
+if [ -z "$SUB_SCRIPT" ]; then
+    echo "Error: Unknown board type '$BOARD'"
+    usage
+fi
+
+echo "Running: $SUB_SCRIPT ${ARGS[@]}"
+"$SUB_SCRIPT" "${ARGS[@]}"

scripts/raspberrypi/build-image-common.sh

@@ -610,9 +610,9 @@ cur_dir=$(cd $(dirname $0);pwd)
 
 workdir=${cur_dir}
 if [ "x${workdir}" == "x/" ]; then
-    workdir=/raspi_output_common
+    workdir=/raspi_output
 else
-    workdir=${workdir}/raspi_output_common
+    workdir=${workdir}/raspi_output
 fi
 
 buildid=$(date +%Y%m%d%H%M%S)

scripts/raspberrypi/build-image-docker.sh

@@ -48,6 +48,7 @@ parseargs()
         elif [ "x$1" == "x-k" -o "x$1" == "x--kernel" ]; then
             kernel_url=`echo $2`
             params="${params} -k ${kernel_url}"
+            KERNEL_COMPILE="-common"
             shift
             shift
         elif [ "x$1" == "x-b" -o "x$1" == "x--branch" ]; then
@@ -125,16 +126,17 @@ LOG(){
 cur_dir=$(cd $(dirname $0);pwd)
 
 docker_file="https://repo.openeuler.org/openEuler-20.03-LTS-SP1/docker_img/aarch64/openEuler-docker.aarch64.tar.xz"
+KERNEL_COMPILE=""
 
-workdir=${cur_dir}/raspi_output_common
+workdir=${cur_dir}/raspi_output
 
 buildid=$(date +%Y%m%d%H%M%S)
 builddate=${buildid:0:8}
 
 log_dir=${workdir}/log
 params_dir=${workdir}/params
-euler_dir=${cur_dir}/config-common
+params_dir_indocker=/work/raspi_output/params
-params_dir_indocker=/work/raspi_output_common/params
+euler_dir=${cur_dir}/config$KERNEL_COMPILE
 
 if [ -d ${params_dir} ]; then
     rm -rf ${params_dir}
@@ -168,16 +170,16 @@ LOG build raspi image with docker: ${docker_file}.
 
 (echo "FROM $docker_img_name" && grep -v FROM ${euler_dir}/Dockerfile_makeraspi) | docker build -t ${docker_img_name}-${buildid} --no-cache -f- ${euler_dir}
 echo docker run --rm --privileged=true \
-    -v ${cur_dir}/build-image-common.sh:/work/build-image-common.sh \
+    -v ${cur_dir}/build-image$KERNEL_COMPILE.sh:/work/build-image.sh \
     -v ${euler_dir}:/work/config-common \
     -v ${cur_dir}/config:/work/config \
-    -v ${workdir}:/work/raspi_output_common \
+    -v ${workdir}:/work/raspi_output \
     ${docker_img_name}-${buildid} ${params}
 docker run --rm --privileged=true \
-    -v ${cur_dir}/build-image-common.sh:/work/build-image-common.sh \
+    -v ${cur_dir}/build-image$KERNEL_COMPILE.sh:/work/build-image.sh \
     -v ${euler_dir}:/work/config-common \
     -v ${cur_dir}/config:/work/config \
-    -v ${workdir}:/work/raspi_output_common \
+    -v ${workdir}:/work/raspi_output \
     ${docker_img_name}-${buildid} ${params}
 chmod -R a+r ${workdir}/img
 docker image rm ${docker_img_name}-${buildid}

scripts/raspberrypi/config-common/Dockerfile_makeraspi

@@ -1,13 +0,0 @@
-FROM openeuler-20.03-lts-sp1:latest
-
-RUN dnf clean expire-cache
-
-RUN dnf -y install cmake gdb gcc gcc-c++ libstdc++-static ncurses ncurses-devel make python bash coreutils && \
-    dnf -y clean all
-
-RUN dnf -y install module-init-tools git openssl-devel bc bison flex dnf-plugins-core dosfstools parted wget device-mapper-multipath grep xz kpartx
-RUN dnf -y install rsync passwd diffutils
-ENV SHELL=/bin/bash
-
-ENTRYPOINT ["/bin/bash", "/work/build-image-common.sh"]
-

scripts/raspberrypi/config-common/Dockerfile_makeraspi

@@ -0,0 +1 @@
+../config/Dockerfile_makeraspi

scripts/raspberrypi/config/Dockerfile_makeraspi

@@ -0,0 +1,13 @@
+FROM openeuler-20.03-lts-sp1:latest
+
+RUN dnf clean expire-cache
+
+RUN dnf -y install cmake gdb gcc gcc-c++ libstdc++-static ncurses ncurses-devel make python bash coreutils && \
+    dnf -y clean all
+
+RUN dnf -y install module-init-tools git openssl-devel bc bison flex dnf-plugins-core dosfstools parted wget device-mapper-multipath grep xz kpartx
+RUN dnf -y install rsync passwd diffutils
+ENV SHELL=/bin/bash
+
+ENTRYPOINT ["/bin/bash", "/work/build-image.sh"]
+

scripts/rockchip/build.sh

@@ -43,7 +43,7 @@ default_param() {
     branch=openEuler-20.03-LTS
     repo_file="https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo"
     kernel_url="https://gitee.com/openeuler/rockchip-kernel.git"
-    workdir=$(pwd)/build
+    workdir=$cur_dir/build
     name=${branch}-${board}-aarch64-alpha1
     make_cores=$(nproc)
 }
@@ -133,13 +133,13 @@ LOG(){
     echo `date` - INFO, $* | tee -a ${log_dir}/${builddate}.log
 }
 
+cur_dir=$(cd $(dirname $0);pwd)
+
 default_param
 parseargs "$@" || help $?
 
 LOG "Selected board: ${board}."
 
-cur_dir=$(cd $(dirname $0);pwd)
-
 source ${cur_dir}/boards/${board}.conf
 
 LOG "Board config: ${board}."
@@ -170,15 +170,15 @@ else
 fi
 
 if [[ $(cat $workdir/.done | grep u-boot) != "u-boot" ]];then
-    bash build_u-boot.sh
+    bash $cur_dir/build_u-boot.sh
 fi
 
 if [[ $(cat $workdir/.done | grep bootimg) != "bootimg" ]];then
-    bash build_boot.sh
+    bash $cur_dir/build_boot.sh
 fi
 
 if [[ $(cat $workdir/.done | grep rootfs) != "rootfs" ]];then
-    bash build_rootfs.sh
+    bash $cur_dir/build_rootfs.sh
 fi
 
-bash gen_image.sh --board ${board}
+bash $cur_dir/gen_image.sh --board ${board}

scripts/rockchip/build_boot.sh

@@ -21,7 +21,7 @@ help()
 }
 
 default_param() {
-    workdir=$(pwd)/build
+    workdir=$cur_dir/build
     branch=openEuler-20.03-LTS
     default_defconfig=openeuler_rockchip_defconfig
     board=firefly-rk3399
@@ -242,6 +242,7 @@ mk_boot() {
 }
 
 kernel_defconfig=""
+cur_dir=$(cd $(dirname $0);pwd)
 
 default_param
 local_param
@@ -260,11 +261,12 @@ elif [ -f $default_defconfig ]; then
     kernel_defconfig=${workdir}/${default_defconfig##*/}
 fi
 
-source $workdir/../boards/${board}.conf
-
 if [ ! -d $workdir ]; then
     mkdir $workdir
 fi
+
+source $workdir/../boards/${board}.conf
+
 if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi
 if [ ! -f $workdir/.done ];then
     touch $workdir/.done

scripts/rockchip/build_rootfs.sh

@@ -24,7 +24,7 @@ default_param() {
     board=firefly-rk3399
     repo_file="https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo"
     tmp_dir=${workdir}/tmp
-    workdir=$(pwd)/build
+    workdir=$cur_dir/build
     branch=openEuler-20.03-LTS
     nonfree_bin_dir=${workdir}/../bin
     rootfs_dir=${workdir}/rootfs
@@ -325,6 +325,7 @@ mk_rootfsimg() {
 }
 set -e
 root_need
+cur_dir=$(cd $(dirname $0);pwd)
 default_param
 local_param
 parseargs "$@" || help $?
@@ -335,11 +336,12 @@ POST_BOARD_OVERLAY() {
     echo "Initial POST_BOARD_OVERLAY function" # It will be overwritten by board.conf.
 }
 
-source $workdir/../boards/${board}.conf
-
 if [ ! -d $workdir ]; then
     mkdir $workdir
 fi
+
+source $workdir/../boards/${board}.conf
+
 if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi
 if [ ! -f $workdir/.done ];then
     touch $workdir/.done

scripts/rockchip/build_u-boot.sh

@@ -19,7 +19,7 @@ help()
 
 default_param() {
     board=firefly-rk3399
-    workdir=$(pwd)/build
+    workdir=$cur_dir/build
     u_boot_url="https://gitlab.arm.com/systemready/firmware-build/u-boot.git"
     rk3399_bl31_url="https://github.com/rockchip-linux/rkbin/raw/master/bin/rk33/rk3399_bl31_v1.36.elf"
     log_dir=$workdir/log
@@ -135,15 +135,17 @@ use_prebuild_u-boot() {
 
 set -e
 u_boot_ver="v2020.10"
+cur_dir=$(cd $(dirname $0);pwd)
 default_param
 local_param
 parseargs "$@" || help $?
 
-source $workdir/../boards/${board}.conf
-
 if [ ! -d $workdir ]; then
     mkdir $workdir
 fi
+
+source $workdir/../boards/${board}.conf
+
 if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi
 if [ ! -f $workdir/.done ];then
     touch $workdir/.done

scripts/rockchip/gen_image-x86_64.sh

@@ -17,8 +17,8 @@ help()
 }
 
 default_param() {
-    workdir=$(pwd)/build
+    workdir=$cur_dir/build
-    bindir=$(pwd)/bin/rk3588-pack
+    bindir=$cur_dir/bin/rk3588-pack
     outputdir=${workdir}/$(date +'%Y-%m-%d')
     name=openEuler-22.03-LTS-RK3588
     rootfs_dir=${workdir}/rootfs
@@ -74,6 +74,7 @@ make_img(){
 }
 
 LOG "gen image..."
+cur_dir=$(cd $(dirname $0);pwd)
 default_param
 prepare_bin
 prepare_img

scripts/rockchip/gen_image.sh

@@ -18,7 +18,7 @@ help()
 }
 
 default_param() {
-    workdir=$(pwd)/build
+    workdir=$cur_dir/build
     outputdir=${workdir}/$(date +'%Y-%m-%d')
     name=openEuler-Firefly-RK3399-aarch64-alpha1
     board=firefly-rk3399
@@ -287,9 +287,14 @@ outputd(){
 }
 
 set -e
+cur_dir=$(cd $(dirname $0);pwd)
 default_param
 parseargs "$@" || help $?
 
+if [ ! -d $workdir ]; then
+    mkdir $workdir
+fi
+
 source $workdir/../boards/${board}.conf
 
 if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi