diff --git a/README.en.md b/README.en.md index 6108544..03e1e98 100644 --- a/README.en.md +++ b/README.en.md @@ -13,6 +13,9 @@ This repository is the main repository of the openEuler SBC (Single-Board Comput - [How to download latest image](#how-to-download-latest-image) - [Raspberry Pi](#raspberry-pi) - [Rockchip](#rockchip) + - [How to build image](#how-to-build-image) + - [Prepare the environment](#prepare-the-environment) + - [Run the scripts to build image](#run-the-scripts-to-build-image) @@ -286,4 +289,50 @@ Basic information of the image is as follows: openEuler 22.03 LTS SP3 repository

A compressed RAW original image

- \ No newline at end of file + + +## How to build image + +### Prepare the environment + +To build openEuler AArch64 image for Raspberry Pi, Rockchip or other SoCs, the requirements of running scripts of this repository are as follows: + +- OS: openEuler or CentOS 8 +- Hardware: AArch64 hardware, such as Raspberry Pi, Firefly RK3399, Firefly ROC-RK3588S-PC + +For other architecture hardware, you can use [QEMU](https://www.qemu.org/) to build AArch64 system emulation. + +### Run the scripts to build image + +You can use the respective scripts of Raspberry Pi, Rockchip or other SoCs to build images. Refer to the specific documentation: +- [Build Raspberry Pi images](./documents/树莓派.md#构建镜像) +- [Build images for Rochchip and other SoCs](./documents/瑞芯微等开发板.md#镜像构建) + +Alternatively, you can use the unified entry point [build.sh](./scripts/build.sh) to build images for Raspberry Pi, Rockchip or other SoCs by executing the following command: + +`sudo bash scripts/build.sh --board BOARD_TYPE --in-docker [other_args...]` + +Parameter Definitions & Meaning: + +1. `--in-docker` + Build the image using a Docker container. Refer to the links below: + - [Build Raspberry Pi images in Docker](./documents/树莓派.md#docker-容器内构建) + - [Build images for Rockchip or other SoCs in Docker](./documents/瑞芯微等开发板.md#docker-容器内构建) + +2. `--board BOARD_TYPE` + Specifies the development board type. Currently supported parameters include: + + - `rpi`: Build a Raspberry Pi image without compiling the kernel. For other parameters, refer to [Quick build for Raspberry Pi (no kernel compilation)](./documents/树莓派.md#快速构建无需编译内核推荐). + - `rpi-custom`: Build a Raspberry Pi image with kernel compilation. For other parameters, refer to [Build a Raspberry Pi image using a custom-compiled kernel](./documents/树莓派.md#完全构建包括编译内核). + - `firefly-itx-3588j`: Build a Firefly ITX-3588J image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). + - `firefly-rk3399`: Build a Firefly RK3399 image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). + - `firefly-roc-rk3566-pc`: Build a Firefly ROC-RK3566-PC image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). + - `firefly-roc-rk3568-pc`: Build a Firefly ROC-RK3568-PC image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). + - `firefly-roc-rk3568-pc-se`: Build a Firefly ROC-RK3568-PC-SE image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). + - `firefly-roc-rk3588s-pc`: Build a Firefly ROC-RK3588S-PC image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). + - `phytiumpi-4gb`: Build a Phytium Pi 4GB image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). + - `radxa-rock5b`: Build a Radxa Rock-5B image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). + - `radxa-rockpi-4a`: Build a Radxa RockPi-4A image. For other parameters, refer to [Build an image for Rockchip or other SoCs](./documents/瑞芯微等开发板.md#一次构建). + +3. `-h`, `--help` + Display help information. diff --git a/README.md b/README.md index 0b77e1d..87560d6 100644 --- a/README.md +++ b/README.md @@ -13,6 +13,9 @@ - [最新镜像](#最新镜像) - [树莓派](#树莓派) - [瑞芯微等其他开发板](#瑞芯微等其他开发板) + - [镜像构建](#镜像构建) + - [准备环境](#准备环境) + - [构建镜像](#构建镜像) ## To Do List @@ -286,3 +289,48 @@ SIG 组基本信息位于 [sig-SBC](https://gitee.com/openeuler/community/tree/m

压缩后的 RAW 原始镜像

+ +## 镜像构建 + +### 准备环境 + +本仓库的脚本运行环境要求如下： + +- 操作系统：openEuler、CentOS 8 +- 架构：AArch64，如树莓派、 RK3399 开发板、 RK3588 开发板 + +其他架构可以使用 [QEMU](https://www.qemu.org/) 模拟器搭建 AArch64 运行环境。 + +### 构建镜像 + +可以使用树莓派或瑞芯微等开发板各自的脚本构建镜像，具体文档参考： +- [树莓派镜像构建](./documents/树莓派.md#构建镜像) +- [瑞芯微等开发板镜像构建](./documents/瑞芯微等开发板.md#镜像构建) + +也可以使用统一入口 [build.sh](./scripts/build.sh) 构建树莓派或瑞芯微等开发板镜像，执行命令： + +`sudo bash scripts/build.sh --board BOARD_TYPE --in-docker [other_args...]` + +各个参数含义： + +1. --in-docker + 使用 Docker 容器构建镜像，参考链接： + - [使用 Docker 容器构建树莓派镜像](./documents/树莓派.md#docker-容器内构建) + - [使用 Docker 容器构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#docker-容器内构建) + +2. --board BOARD_TYPE + 开发板类型和构建方式。当前支持的参数有： + - rpi，无需编译内核直接构建树莓派镜像，其他参数请参考 [无需编译内核快速构建树莓派镜像](./documents/树莓派.md#快速构建无需编译内核推荐)。 + - rpi-custom，编译内核并构建树莓派镜像，其他参数请参考 [编译内核构建树莓派镜像](./documents/树莓派.md#完全构建包括编译内核)。 + - firefly-itx-3588j，构建 Firefly ITX-3588J 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 + - firefly-rk3399，构建 Firefly RK3399 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 + - firefly-roc-rk3566-pc，构建 Firefly ROC-RK3566-PC 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 + - firefly-roc-rk3568-pc，构建 Firefly ROC-RK3568-PC 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 + - firefly-roc-rk3568-pc-se，构建 Firefly ROC-RK3568-PC-SE 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 + - firefly-roc-rk3588s-pc，构建 Firefly ROC-RK3588S-PC 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 + - phytiumpi-4gb，构建 Phytium Pi 4GB 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 + - radxa-rock5b，构建 Radxa Rock-5B 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 + - radxa-rockpi-4a，构建 Radxa RockPi-4A 开发板镜像，其他参数请参考 [构建瑞芯微等开发板镜像](./documents/瑞芯微等开发板.md#一次构建)。 + +3. -h, --help + 显示帮助信息。 diff --git a/documents/树莓派.md b/documents/树莓派.md index f607b0f..525530b 100644 --- a/documents/树莓派.md +++ b/documents/树莓派.md @@ -13,8 +13,7 @@ - [构建镜像](#构建镜像) - [快速构建（无需编译内核，推荐）](#快速构建无需编译内核推荐) - [完全构建（包括编译内核）](#完全构建包括编译内核) - - [主机上构建](#主机上构建) - - [Docker 容器内构建](#docker-容器内构建) + - [Docker 容器内构建](#docker-容器内构建) @@ -41,8 +40,8 @@ - [openEuler 21.09 内测版（LXDE 桌面、中文输入法）更新日志](raspberrypi/changelog/changelog-21.09-LXDE.md) - [scripts](../scripts/raspberrypi): 构建 openEuler 树莓派镜像的脚本 - [快速构建（不编译内核）](../scripts/raspberrypi/build-image.sh) - - [主机上构建（编译内核）](../scripts/raspberrypi/build-image-common.sh) - - [Docker 容器中构建（编译内核）](../scripts/raspberrypi/build-image-docker.sh) + - [完全构建（编译内核）](../scripts/raspberrypi/build-image-common.sh) + - [Docker 容器中构建](../scripts/raspberrypi/build-image-docker.sh) ## 最新镜像 @@ -140,8 +139,6 @@ 包含编译内核、下载树莓派相关固件等过程，速度相对较慢。 -这里，提供两种构建方式。 - >![](public_sys-resources/icon-notice.gif) **须知：** >当前支持三个 openEuler 版本，即 20.03 LTS、20.09、20.03 LTS SP1、21.03、20.03 LTS SP2、21.09、20.03 LTS SP3、22.03 LTS、22.09、22.03 LTS SP1、23.03、22.03 LTS SP2、22.03 LTS SP3、24.03 LTS、22.03 LTS SP4、24.09、24.03 LTS SP1、25.03 版本。 >如果构建包含 Xfce/UKUI/DDE 桌面环境或者 DevStation 开发者工作站的镜像，需要注意六点： @@ -189,13 +186,11 @@ > - openEuler 25.03：需要选择 [openEuler-RaspberryPi 内核](https://gitee.com/openeuler/raspberrypi-kernel) 的 [openEuler-25.03](https://gitee.com/openeuler/raspberrypi-kernel/tree/openEuler-25.03/) 分支，即将参数 `-k/--kernel` 设置为 `git@gitee.com:openeuler/raspberrypi-kernel.git`，`-b/--branch` 设置为 `openEuler-25.03`。 >6. 根据需要设置 -s/--spec，其具体意义见该参数的介绍部分。 -##### 主机上构建 - 构建镜像需执行命令： `sudo bash build-image-common.sh -n IMAGE_NAME -k KERNEL_URL -b KERNEL_BRANCH -c KERNEL_DEFCONFIG -r REPO -s SPEC --cores N` -脚本运行结束后，会提示镜像的存储位置，镜像默认保存在脚本运行所在目录的 `raspi_output_common/img/` 下。 +脚本运行结束后，会提示镜像的存储位置，镜像默认保存在脚本运行所在目录的 `raspi_output/img/` 下。 各个参数意义： @@ -244,17 +239,17 @@ 并行编译的数量，根据运行脚本的宿主机 CPU 实际数目设定，默认为可用的 CPU 总数。 -##### Docker 容器内构建 +#### Docker 容器内构建 构建镜像需执行命令： `sudo bash build-image-docker.sh -d DOCKER_FILE -n IMAGE_NAME -k KERNEL_URL -b KERNEL_BRANCH -c KERNEL_DEFCONFIG -r REPO --cores N` -脚本运行结束后，镜像默认保存在脚本运行所在目录的 `raspi_output_common/img/` 下。 +脚本运行结束后，镜像默认保存在脚本运行所在目录的 `raspi_output/img/` 下。 -注意！！！运行该脚本前，需安装 Docker 运行环境。该脚本会自动将 DOCKER_FILE 参数对应的 Docker 镜像导入本机系统中。 +注意！！！运行该脚本前，需安装 Docker 运行环境。该脚本会自动将 `-d DOCKER_FILE` 参数对应的 Docker 镜像导入本机系统中。 -除参数 DOCKER_FILE 外，剩余参数与[主机上构建](#主机上构建)中对应参数一致： +除参数 `-d DOCKER_FILE` 外，剩余参数与 [快速构建（无需编译内核，推荐）](#快速构建无需编译内核推荐) 或 [完全构建（包括编译内核）](#完全构建包括编译内核) 中对应参数一致： 1. -d, --docker DOCKER_FILE diff --git a/scripts/build.sh b/scripts/build.sh new file mode 100644 index 0000000..26dd438 --- /dev/null +++ b/scripts/build.sh @@ -0,0 +1,102 @@ +#!/bin/bash + +set -e + +usage() { + echo "Usage: $0 --board BOARD_TYPE --in-docker [other_args...]" + echo Options: + echo "--in-docker Build images in Docker." + echo "--board BOARD_TYPE Supported boards:" + echo " - rpi (Build a Raspberry Pi image without kernel compilation)" + echo " - rpi-custom (Build a Raspberry Pi image using a custom kernel compiled)" + for config in "${RK_BOARDS[@]}"; do + echo " - $config" + done + exit 1 +} + +cur_dir=$(cd $(dirname $0);pwd) +rk_board_dir=$cur_dir/rockchip/boards + +BOARD="" +HELP=false +IN_DOCKER=false +ARGS=() +RK_BOARDS=() +SUB_SCRIPT="" + +while IFS= read -r -d '' file; do + RK_BOARDS+=("$(basename "$file" .conf)") +done < <(find "$rk_board_dir" -type f -name "*.conf" ! -name "sample.conf" -print0 | sort -z) + +if [ $# -eq 0 ]; then + usage +fi + +while [[ $# -gt 0 ]]; do + case "$1" in + --board) + BOARD="$2" + shift 2 + ;; + --in-docker) + IN_DOCKER=true + shift + ;; + --help) + HELP=true + ARGS+=("--help") + shift + ;; + *) + ARGS+=("$1") + shift + ;; + esac +done + +if [ -z "$BOARD" ]; then + if ! $HELP; then + echo "Error: --board parameter is required" + fi + usage +fi + +case "$BOARD" in + rpi) + if $IN_DOCKER; then + SUB_SCRIPT="$cur_dir/raspberrypi/build-image-docker.sh" + else + SUB_SCRIPT="$cur_dir/raspberrypi/build-image.sh" + fi + ;; + rpi-custom) + if $IN_DOCKER; then + SUB_SCRIPT="$cur_dir/raspberrypi/build-image-docker.sh" + else + SUB_SCRIPT="$cur_dir/raspberrypi/build-image-common.sh" + fi + ;; + *) + for item in "${RK_BOARDS[@]}"; do + if [ "$item" == "$BOARD" ]; then + if $IN_DOCKER; then + SUB_SCRIPT="$cur_dir/rockchip/build-image-docker.sh" + else + SUB_SCRIPT="$cur_dir/rockchip/build.sh" + fi + ARGS+=("--board") + ARGS+=("$BOARD") + break + fi + done + ;; +esac + +if [ -z "$SUB_SCRIPT" ]; then + echo "Error: Unknown board type '$BOARD'" + usage +fi + +echo "Running: $SUB_SCRIPT ${ARGS[@]}" +"$SUB_SCRIPT" "${ARGS[@]}" diff --git a/scripts/raspberrypi/build-image-common.sh b/scripts/raspberrypi/build-image-common.sh old mode 100644 new mode 100755 index 34caf33..76aafd8 --- a/scripts/raspberrypi/build-image-common.sh +++ b/scripts/raspberrypi/build-image-common.sh @@ -610,9 +610,9 @@ cur_dir=$(cd $(dirname $0);pwd) workdir=${cur_dir} if [ "x${workdir}" == "x/" ]; then - workdir=/raspi_output_common + workdir=/raspi_output else - workdir=${workdir}/raspi_output_common + workdir=${workdir}/raspi_output fi buildid=$(date +%Y%m%d%H%M%S) diff --git a/scripts/raspberrypi/build-image-docker.sh b/scripts/raspberrypi/build-image-docker.sh old mode 100644 new mode 100755 index ba324ae..0b73ede --- a/scripts/raspberrypi/build-image-docker.sh +++ b/scripts/raspberrypi/build-image-docker.sh @@ -48,6 +48,7 @@ parseargs() elif [ "x$1" == "x-k" -o "x$1" == "x--kernel" ]; then kernel_url=`echo $2` params="${params} -k ${kernel_url}" + KERNEL_COMPILE="-common" shift shift elif [ "x$1" == "x-b" -o "x$1" == "x--branch" ]; then @@ -125,16 +126,17 @@ LOG(){ cur_dir=$(cd $(dirname $0);pwd) docker_file="https://repo.openeuler.org/openEuler-20.03-LTS-SP1/docker_img/aarch64/openEuler-docker.aarch64.tar.xz" +KERNEL_COMPILE="" -workdir=${cur_dir}/raspi_output_common +workdir=${cur_dir}/raspi_output buildid=$(date +%Y%m%d%H%M%S) builddate=${buildid:0:8} log_dir=${workdir}/log params_dir=${workdir}/params -euler_dir=${cur_dir}/config-common -params_dir_indocker=/work/raspi_output_common/params +params_dir_indocker=/work/raspi_output/params +euler_dir=${cur_dir}/config$KERNEL_COMPILE if [ -d ${params_dir} ]; then rm -rf ${params_dir} @@ -168,16 +170,16 @@ LOG build raspi image with docker: ${docker_file}. (echo "FROM $docker_img_name" && grep -v FROM ${euler_dir}/Dockerfile_makeraspi) | docker build -t ${docker_img_name}-${buildid} --no-cache -f- ${euler_dir} echo docker run --rm --privileged=true \ - -v ${cur_dir}/build-image-common.sh:/work/build-image-common.sh \ + -v ${cur_dir}/build-image$KERNEL_COMPILE.sh:/work/build-image.sh \ -v ${euler_dir}:/work/config-common \ -v ${cur_dir}/config:/work/config \ - -v ${workdir}:/work/raspi_output_common \ + -v ${workdir}:/work/raspi_output \ ${docker_img_name}-${buildid} ${params} docker run --rm --privileged=true \ - -v ${cur_dir}/build-image-common.sh:/work/build-image-common.sh \ + -v ${cur_dir}/build-image$KERNEL_COMPILE.sh:/work/build-image.sh \ -v ${euler_dir}:/work/config-common \ -v ${cur_dir}/config:/work/config \ - -v ${workdir}:/work/raspi_output_common \ + -v ${workdir}:/work/raspi_output \ ${docker_img_name}-${buildid} ${params} chmod -R a+r ${workdir}/img docker image rm ${docker_img_name}-${buildid} diff --git a/scripts/raspberrypi/build-image.sh b/scripts/raspberrypi/build-image.sh old mode 100644 new mode 100755 diff --git a/scripts/raspberrypi/config-common/Dockerfile_makeraspi b/scripts/raspberrypi/config-common/Dockerfile_makeraspi deleted file mode 100644 index cfa8efb..0000000 --- a/scripts/raspberrypi/config-common/Dockerfile_makeraspi +++ /dev/null @@ -1,13 +0,0 @@ -FROM openeuler-20.03-lts-sp1:latest - -RUN dnf clean expire-cache - -RUN dnf -y install cmake gdb gcc gcc-c++ libstdc++-static ncurses ncurses-devel make python bash coreutils && \ - dnf -y clean all - -RUN dnf -y install module-init-tools git openssl-devel bc bison flex dnf-plugins-core dosfstools parted wget device-mapper-multipath grep xz kpartx -RUN dnf -y install rsync passwd diffutils -ENV SHELL=/bin/bash - -ENTRYPOINT ["/bin/bash", "/work/build-image-common.sh"] - diff --git a/scripts/raspberrypi/config-common/Dockerfile_makeraspi b/scripts/raspberrypi/config-common/Dockerfile_makeraspi new file mode 120000 index 0000000..0ad546b --- /dev/null +++ b/scripts/raspberrypi/config-common/Dockerfile_makeraspi @@ -0,0 +1 @@ +../config/Dockerfile_makeraspi \ No newline at end of file diff --git a/scripts/raspberrypi/config/Dockerfile_makeraspi b/scripts/raspberrypi/config/Dockerfile_makeraspi new file mode 100644 index 0000000..0ba1932 --- /dev/null +++ b/scripts/raspberrypi/config/Dockerfile_makeraspi @@ -0,0 +1,13 @@ +FROM openeuler-20.03-lts-sp1:latest + +RUN dnf clean expire-cache + +RUN dnf -y install cmake gdb gcc gcc-c++ libstdc++-static ncurses ncurses-devel make python bash coreutils && \ + dnf -y clean all + +RUN dnf -y install module-init-tools git openssl-devel bc bison flex dnf-plugins-core dosfstools parted wget device-mapper-multipath grep xz kpartx +RUN dnf -y install rsync passwd diffutils +ENV SHELL=/bin/bash + +ENTRYPOINT ["/bin/bash", "/work/build-image.sh"] + diff --git a/scripts/rockchip/build-image-docker.sh b/scripts/rockchip/build-image-docker.sh old mode 100644 new mode 100755 diff --git a/scripts/rockchip/build.sh b/scripts/rockchip/build.sh index bb97ee0..21a0218 100755 --- a/scripts/rockchip/build.sh +++ b/scripts/rockchip/build.sh @@ -43,7 +43,7 @@ default_param() { branch=openEuler-20.03-LTS repo_file="https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo" kernel_url="https://gitee.com/openeuler/rockchip-kernel.git" - workdir=$(pwd)/build + workdir=$cur_dir/build name=${branch}-${board}-aarch64-alpha1 make_cores=$(nproc) } @@ -133,13 +133,13 @@ LOG(){ echo `date` - INFO, $* | tee -a ${log_dir}/${builddate}.log } +cur_dir=$(cd $(dirname $0);pwd) + default_param parseargs "$@" || help $? LOG "Selected board: ${board}." -cur_dir=$(cd $(dirname $0);pwd) - source ${cur_dir}/boards/${board}.conf LOG "Board config: ${board}." @@ -170,15 +170,15 @@ else fi if [[ $(cat $workdir/.done | grep u-boot) != "u-boot" ]];then - bash build_u-boot.sh + bash $cur_dir/build_u-boot.sh fi if [[ $(cat $workdir/.done | grep bootimg) != "bootimg" ]];then - bash build_boot.sh + bash $cur_dir/build_boot.sh fi if [[ $(cat $workdir/.done | grep rootfs) != "rootfs" ]];then - bash build_rootfs.sh + bash $cur_dir/build_rootfs.sh fi -bash gen_image.sh --board ${board} +bash $cur_dir/gen_image.sh --board ${board} diff --git a/scripts/rockchip/build_boot.sh b/scripts/rockchip/build_boot.sh index 32f42f0..f51072b 100755 --- a/scripts/rockchip/build_boot.sh +++ b/scripts/rockchip/build_boot.sh @@ -21,7 +21,7 @@ help() } default_param() { - workdir=$(pwd)/build + workdir=$cur_dir/build branch=openEuler-20.03-LTS default_defconfig=openeuler_rockchip_defconfig board=firefly-rk3399 @@ -242,6 +242,7 @@ mk_boot() { } kernel_defconfig="" +cur_dir=$(cd $(dirname $0);pwd) default_param local_param @@ -260,11 +261,12 @@ elif [ -f $default_defconfig ]; then kernel_defconfig=${workdir}/${default_defconfig##*/} fi -source $workdir/../boards/${board}.conf - if [ ! -d $workdir ]; then mkdir $workdir fi + +source $workdir/../boards/${board}.conf + if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi if [ ! -f $workdir/.done ];then touch $workdir/.done diff --git a/scripts/rockchip/build_rootfs.sh b/scripts/rockchip/build_rootfs.sh index d53ee0e..5c4c18e 100755 --- a/scripts/rockchip/build_rootfs.sh +++ b/scripts/rockchip/build_rootfs.sh @@ -24,7 +24,7 @@ default_param() { board=firefly-rk3399 repo_file="https://gitee.com/src-openeuler/openEuler-repos/raw/openEuler-20.03-LTS/generic.repo" tmp_dir=${workdir}/tmp - workdir=$(pwd)/build + workdir=$cur_dir/build branch=openEuler-20.03-LTS nonfree_bin_dir=${workdir}/../bin rootfs_dir=${workdir}/rootfs @@ -325,6 +325,7 @@ mk_rootfsimg() { } set -e root_need +cur_dir=$(cd $(dirname $0);pwd) default_param local_param parseargs "$@" || help $? @@ -335,11 +336,12 @@ POST_BOARD_OVERLAY() { echo "Initial POST_BOARD_OVERLAY function" # It will be overwritten by board.conf. } -source $workdir/../boards/${board}.conf - if [ ! -d $workdir ]; then mkdir $workdir fi + +source $workdir/../boards/${board}.conf + if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi if [ ! -f $workdir/.done ];then touch $workdir/.done diff --git a/scripts/rockchip/build_u-boot.sh b/scripts/rockchip/build_u-boot.sh index 762ac28..f303489 100755 --- a/scripts/rockchip/build_u-boot.sh +++ b/scripts/rockchip/build_u-boot.sh @@ -19,7 +19,7 @@ help() default_param() { board=firefly-rk3399 - workdir=$(pwd)/build + workdir=$cur_dir/build u_boot_url="https://gitlab.arm.com/systemready/firmware-build/u-boot.git" rk3399_bl31_url="https://github.com/rockchip-linux/rkbin/raw/master/bin/rk33/rk3399_bl31_v1.36.elf" log_dir=$workdir/log @@ -135,15 +135,17 @@ use_prebuild_u-boot() { set -e u_boot_ver="v2020.10" +cur_dir=$(cd $(dirname $0);pwd) default_param local_param parseargs "$@" || help $? -source $workdir/../boards/${board}.conf - if [ ! -d $workdir ]; then mkdir $workdir fi + +source $workdir/../boards/${board}.conf + if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi if [ ! -f $workdir/.done ];then touch $workdir/.done diff --git a/scripts/rockchip/gen_image-x86_64.sh b/scripts/rockchip/gen_image-x86_64.sh index 8ebcec8..97fd960 100644 --- a/scripts/rockchip/gen_image-x86_64.sh +++ b/scripts/rockchip/gen_image-x86_64.sh @@ -17,8 +17,8 @@ help() } default_param() { - workdir=$(pwd)/build - bindir=$(pwd)/bin/rk3588-pack + workdir=$cur_dir/build + bindir=$cur_dir/bin/rk3588-pack outputdir=${workdir}/$(date +'%Y-%m-%d') name=openEuler-22.03-LTS-RK3588 rootfs_dir=${workdir}/rootfs @@ -74,6 +74,7 @@ make_img(){ } LOG "gen image..." +cur_dir=$(cd $(dirname $0);pwd) default_param prepare_bin prepare_img diff --git a/scripts/rockchip/gen_image.sh b/scripts/rockchip/gen_image.sh index 90ceb50..aaa0d35 100755 --- a/scripts/rockchip/gen_image.sh +++ b/scripts/rockchip/gen_image.sh @@ -18,7 +18,7 @@ help() } default_param() { - workdir=$(pwd)/build + workdir=$cur_dir/build outputdir=${workdir}/$(date +'%Y-%m-%d') name=openEuler-Firefly-RK3399-aarch64-alpha1 board=firefly-rk3399 @@ -287,9 +287,14 @@ outputd(){ } set -e +cur_dir=$(cd $(dirname $0);pwd) default_param parseargs "$@" || help $? +if [ ! -d $workdir ]; then + mkdir $workdir +fi + source $workdir/../boards/${board}.conf if [ ! -d ${log_dir} ];then mkdir -p ${log_dir}; fi